This figure of The Veil features incredible detail and is part of a collectable limited edition series of fine quality figurines.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

Capturing The Veil all wrapped up with an absence face ready to inexorably hunts the good Doctor down.

Fully BBC licensed and approved merchandise.

Scale 1:21, approx 113mm tall.

This figure of the War Doctor played by John Hurt depicting 'the one who broke the promise' as he is seen in the 2013 Eleventh Doctor tale 'The Day of the Doctor' and features incredible detail and part of a collectible series of fine quality figurines. Fully BBC licensed and approved merchandise. Scale 1:21, approx 92mm tall.

The Expanse collection was launched in the last days of Eaglemoss and had only limited distribution. The first model was an XL version of the series' main ship — the Rocinante, a Martian corvette that ended up under the charge of James Holden.

The Eaglemoss model measures 12.8 inches (32.5 cm) long and comes in its original box.

This stunning figure of one of the Thijarians features incredible detail and is part of a collectable limited edition series of fine quality figurines.

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

The figure depicts a Thijarian as they appeared in the 13th Doctor episode 'Demons of the Punjab'.

Fully BBC licensed and approved merchandise.

Scale 1:21, approx 104mm tall.

The Tritovores were insect like humanoids with heads that would have looked at home on a giant fly. They appeared in the story 'Planet of the Dead', when they captured the Tenth Doctor and Christina de Souza, who they believed were responsible for crashing their spaceship. The figurine is 10 cm tall.

One of the last models Eaglemoss released was the light cycle from the classic 1982 movie 'Tron'. This is the blue version. The red, yellow and orange versions were also released in a limited edition. The film used groundbreaking effects techniques and the cycles themselves were designed by the legendary Syd Mead, who is famous for his work on 'Blade Runner' and 'Aliens'. The Eaglemoss model is 8.7 inches (22 cm) long.

Limited Edition Of ONLY 250

Get all four Tron light cycles with this incredible box set. The original 1982 Tron is one of the most iconic and innovative films ever made, notable for its ground-breaking light cycles race sequence. The light cycles were designed by the legendary neo-futurist concept artist Syd Mead, who also worked on Alien and Blade Runner.  Each cycle has a distinctive color that identifies its rider. The models themselves are 8.7 inches (22 cm) long.

This is a light-up replica of the Master Systems Display (MSD) on the U.S.S. Defiant. The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth.

The light panel is 31.5" (80 cm) long and 10.25" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Defiant. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that the Defiant was the first starship in its class and was launched from the Antares ship yards on Stardate 47538.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Deep Space Nine.

This is a full-sized, polyresin replica (15 inches wide) of the dedication plaque for the original series Enterprise. It was on the bridge of the ship just to the right of the turbolift doors.

The plaque was carefully researched by Star Trek scenic artist Mike Okuda who supplied us with detailed drawings that we used to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time an officially licensed full-size version has ever been available.

You may be surprised to see that it identifies the Enterprise as a Starship-class ship. The term Constitution class was used by fans but only became canon in the first season of TNG when it appeared on a computer readout in "The Naked Now".

This is a full-sized, polyresin replica of the dedication plaque for the U.S.S. Enterprise NCC-1701-A. It was the first time a dedication plaque had said that the Enterprise was a Constitution-class ship.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque.

The plaque confirms that the Enterprise was was launched from Earth's San Francisco Fleet Yards.

This is a light-up replica of the Master Systems Display (MSD) on the Sovereign-class U.S.S. Enterprise NCC-1701-E. . The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth.

The light panel is 31.5" (80 cm) long and 10.25" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Voyager. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop in 1994. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that Voyager was an Intrepid-class starship that was launched from Earth Station McKinley on Stardate 48038.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Voyager.

Visionary pioneer Gerry Anderson created a world full of captivating characters, spectacular vehicles and exciting stories that are beloved by generations of fans around the world. Now you can create your own miniature adventures with The Anderson Collection.

All your favorite heroes and villains brought to life in a cool retro style. Designed with collectors in mind, each figure sports 5 points of jointed articulation, authentic character likenesses and detailed costumes. Faithfully recreated in 3.75 inch (9.5 cm) scale and packaged in a nostalgic format featuring gorgeous artwork.

Collect all the figures from your favorite shows Thunderbirds, Stingray, Joe 90, Captain Scarlet, UFO, and Space: 1999.

Age restriction 14+

Due to ship end of Q3

Figures in this collectable series are frozen in a 'Moment in Time' pose which is detailed on the collectors box.

This figure shows the Voord from the First Doctor (William Hartnell) adventure 'The Keys of Marinus'.

Fully BBC licensed and approved merchandise.

Scale 1:21, approx 106mm tall.

In 'Tooth and Claw' the Doctor and Rose meet Queen Victoria who is being threatened by a Werewolf (or as the Doctor calls it a Lupine Wavelength Haemovariform). It's actually an alien that can transform its host by infecting its blood. It planned to take control of Britain by infecting the Queen. The Doctor eventually defeats it using moonlight. The Eaglemoss figurine was a special issue that stands 15 cm tall.

The Winders were cyborg policemen on the Starship UK. Their heads which were human on one side, rotated rotated to reveal an horrific smiling face. The figurine is 10 cm tall.