"LIMITED EDITION OF 750 WORLDWIDE The Fugitive Doctor. UNIT. The Black Archive. One all-new Battles in Time adventure. Circuit Breaker is a special collector's set of 15 all-new foil cards. Only 750 will ever be made, so once they're gone, they're gone. Reluctantly working with UNIT, the Fugitive Doctor is sent to return objects from the Black Archive and seal tears in reality. Kate Lethbridge-Stewart, Petronella Osgood and Andrew Turner join her, as a corrupted Weeping Angel, the Conductor, the Silence and Daleks from Skaro stand in their way. Why you'll love it Strictly limited to 750 sets worldwide 15 all-new cards, all printed on silver foil Every card is guaranteed in the set, so there's no hunting through packs Key companions appear in Battles in Time for the first time Monsters old and new: Corrupted Angel, the Conductor, the Silence, Lilith, Shock Trooper and a Dalek Drone Includes The Resistor, a special action card that removes a card from your opponent's deck Numbered 143–157, carrying on from the 142-card Obliterator set Comes in a collector's box with the Fugitive Doctor on the front PRE-ORDER: Due to ship October 2026 Specifications Limited edition of 750 worldwide 15 cards, cards 143–157 Silver foil printing throughout Collector's box Pre-order: due to ship October 2026"

This is Master Replicas first ever Doctor Who ship: the Dalek saucer from 2005's 'The Parting of the Ways'. This impressive polyresin model is 21 cm across and was sculpted by Dalek expert Gavin Rymill. The Daleks used saucers with a similar design in the TV Century 21 Dalek comic strip, but in the 1960s TV budgets didn't stretch to expensive spaceship models. The classic Dalek ship only made its debut in 2005 when a massive fleet of Dalek ships prepared to invade Earth. The ship was made as a 3D CG model by the Mill. Master Replicas recruited Dalek expert Gavin Rymill to recreate the ships using renders made at the time and careful study of the episodes. 

The modern Viper is a careful update of artist Ralph McQuarrie's original design that was created for the 2004 reboot of Battlestar Galactica. Writer and producer Ron D. Moore wanted to make the show about life on an spaceborne aircraft carrier and the Vipers and their pilots were central to his plans. No Viper pilot was more compelling than Starbuck, who had all the skills (and flaws) to make her a great pilot; this version of the model has her call sign on the hull. The model is 10.6 inches (27 cm) long.

This is a full-sized, polyresin replica (15 inches wide) of the dedication plaque for the original series Enterprise. It was on the bridge of the ship just to the right of the turbolift doors.

The plaque was carefully researched by Star Trek scenic artist Mike Okuda who supplied us with detailed drawings that we used to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time an officially licensed full-size version has ever been available.

You may be surprised to see that it identifies the Enterprise as a Starship-class ship. The term Constitution class was used by fans but only became canon in the first season of TNG when it appeared on a computer readout in "The Naked Now".

Master Replicas is proud to announce the launch of a brand-new line of officially licensed Foundation model ships based on the hit Skydance Television series.

Leading the launch of this incredible new collectible line is the Imperial Jump Ship, a faster-than-light vessel used by the Empire to dominate space travel. This intricately detailed, 10.75-inch die-cast model is crafted using the original CG mesh used by the Foundation VFX team during the making of the series, ensuring an incredible degree of accuracy.

The Tachi was the original name and paint scheme for the Rocinante when it was an MCRN ship. It appeared in the first season of The Expanse before Holden and his crew repainted and renamed it.

The model is 10 inches (25 cm) long.

This is a limited edition of 500 pieces that is exclusively available to club members.

Shipping From: February 2025

The current version of the TARDIS was actually introduced during the Doctor’s thirteenth regeneration in 2018. It combines the best of all the previous TARDIS props with definite echoes of the original version used by William Hartnell. It has a stacked roof and a more sophisticated paint scheme than its immediate predecessor.

Our model was built by Gavin Rymill. It is 1:21 scale (to go with The Doctor Who Figurine Collection) and stands 139 mm tall to the top of the lamp.

This action figure shows Ensign Brad Boimler when he was a junior officer on the U.S.S. Cerritos in the series Star Trek: Lower Decks.

Boimler has always been one of the most anxious members of the crew and was eager to impress.

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a phaser and PADD. It is part of a new series that features characters from all the modern Star Trek shows.

NOW SHIPPING

"One episode. One ship. One very big bang. The Replicators were tearing through the Asgard fleet, and Thor needed help. In “Small Victories”, the opening episode of Stargate SG-1 Season 4, Carter joins him far from Earth and finds the Asgard’s newest warship still unfinished. It carries Jack O’Neill’s name, and it’s about to become the most expensive trap in the galaxy. The O’Neill only had one outing, but fans still talk about it. Our model captures it just as it looked on screen, using the original VFX files from the production. What makes it special: Made from the original Stargate SG-1 VFX files, so every curve matches what you saw on screen Die-cast construction, so it feels solid and weighty 170mm long, with a display stand for your shelf or desk Looks great next to our Bilskirnir, Thor’s ship PRE-ORDER: Due to ship to customers in March 2027 Specifications: Length: 170mm (6.69"") Width: 155mm (6.10"") Height: 60mm (2.36"") Material: Die-cast Display stand included Created from the original Stargate SG-1 VFX files Images shown are digital renders and will be replaced with product photography during development Pre-order: due to ship to customers in March 2027 This is a collectible intended for display. It is not a toy and is not suitable for anyone under the age of 14."

Captain Janeway's U.S.S. Voyager — die-cast, with a 48-page collector book.

One of the most famous ships in Starfleet history. In 2371 the U.S.S. Voyager was flung 70,000 light years across the galaxy by the Caretaker. A journey that should have taken 70 years, Janeway's crew made in seven.

Why you'll love it

• The long way home — new species, and the Borg, every step of the way.
• The 48-page collector book — the making of Star Trek: Voyager, from extensive interviews with the show's creators. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

This action figure shows Lt. Spock as portrayed by Ethan Peck in Strange New Worlds. He carries a phaser and tricorder.  The figure is 4.5 inches (11.4 cm) tall. and is part of a new series that features characters from all the modern Star Trek shows.

The Ma’tok staff (commonly known as a staff weapon) was the Jaffa’s weapon of choice. It is designed to fire bolts of plasma, with a range of 50-60 meters. The intensity of the blasts, which are powered by a Naquadah generator, can be adjusted so it can stun a human or blast through rock. At close quarters they were often used as a conventional staff weapon. The full-size staff was 6’ 6” (2 m) tall. The desktop replica was digitally sculpted with careful reference to the original props. It  is 12” (30 cm) long and comes with a stand that can be used to display it vertically or horizontal. Prototype images, Final Staff will be diecast for strength and hand finished.

The U.S.S. Enterprise NCC-1701-G — a screen-accurate die-cast model with a 48-page collector book.

At the end of Star Trek: Picard, the ship that had served as the U.S.S. Titan-A was renamed in honour of the most famous name in Starfleet — becoming the U.S.S. Enterprise NCC-1701-G. Command passed to Captain Seven of Nine, with Ensign Jack Crusher at the conn.

Why you'll love it

• The legendary name reborn — Seven of Nine's ship, and a new crew for a new era.
• The 48-page collector book — profiles the Enterprise-G and how it carries the Enterprise legacy forward. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

When Doctor Who returned in 2005, the team built an entirely new TARDIS. This version was bigger than any of its predecessors and, in fact, bigger than an original London police box. The production team actually made four different versions of the prop but there were no significant differences between them.

The model is 1:21 scale to match the Eaglemoss figurines and stands 14.3 cm tall.

"The latest Stargate desktop replica is an incredibly detailed replica of the helmet worn by Anubis’s Jaffa guards. Anubis was one of the most dangerous system lords. Centuries ago, he killed his master Apep and set himself up as the Emperor of the Goa’uld. This led to a civil war, which ended when Ra overthrew Anubis and banished him. At the turn of the 21st century Anubis returned to assume command of the Goa’uld. Anubis was known as the jackal god and this was reflected in the design of the helmets worn by his Jaffa. The helmets were only actually seen in the movie and at the end of Season 8 when they were worn by Jackal guards in Ra’s service. The replica helmet was digitally sculpted, based on careful study of the original props. It has been cast in polyresin to ensure a high level of accuracy, before being painted. The helmet is the perfect size to sit on a desk or shelf and is just under 6” (15 cm) tall when displayed on its bespoke stand."

Eaglemoss made replicas of the dedication plaques found on the bridge of Starfleet ships. This plaque is for Captain Archer's ship - the Enterprise NX-01, and features the ship's motto 'to boldly go where no man has gone before.'

The Eaglemoss plaques are designed to be displayed on a wall or on a shelf, and measure approximately 10.25 inches (26 cm) across.

The 2004 series of Battlestar Galactica upgraded all the elements of the show, including the Cylons themselves. The modern version of the Centurion was a fully-CG creation that took the series' effects to a new level. In the show, the Centurions were ruthless killing machines with limited intelligence and self awareness.

The statue stands 7.5 inches (19 cm) tall.

The Osiris dates from the first Cylon War and was part of the fleet that featured in Blood & Chrome. It was a stealth frigate, or pocket battleship. The original VFX model was designed by concept artist Richard Livingston.

The Eaglemoss model is just over 10.5 inches (27 cm) long.

This action figure shows Worf in his Starfleet uniform, armed with a kur'leth, as he comes to Admiral Picard's aid in the third season of Star Trek: Picard

The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

Shipping now - remember to use your Star Trek Day spend & save store credit