The Moopsy is one of the cuddliest creatures in the Galaxy but watch out — this little ball of cuteness is an alien murderer that will drink your bones.

Moopsy is a fan-favourite alien from Star Trek: Lower Decks. It looks friendly but it can move at lightning-fast speeds and, once it sinks its fangs into its prey, it can drink its bones in seconds.

When it escaped from Narj's Miraculous Menagerarium it killed Narj and two Pyrithian swamp gobblers before Ransom and Mariner lured it back into it's cage. Handle with care!

Size: 10 inches x 5.5 inches (25 cm x 14 cm)

In moments of stress or contemplation, Captain Picard asked the replicator to produce a hot cup of Earl Grey tea. The replicator, knowing exactly what he wanted, produced the tea in an elegant glass cup.

The Star Trek: The Next Generation art department wanted the cup to look both futuristic and timeless. It had to be at home in the 24th century, but it also had to be instantly recognizable. Rather than creating their own tea cup from scratch, they looked for the best examples of modern, twentieth century design.

They settled on a glass tea cup made by European homewares company, Bodum.

The instantly recognizable BISTRO cup became so closely associated with Star Trek, that fans informally refer to it as “The Picard Cup”. It went on to appear in Star Trek: Voyager: Star Trek: Picard.

Volume/Size: 0.2 l – 6.7 fl oz.

Turn your desk into the bridge of a starship with this extra large desk mat, that's designed to sit under your keyboard and mouse. The mat uses artwork created for Data's Ops station on the U.S.S. Enterprise NCC-1701-D and it's hard to resist tapping it as if you were pressing the buttons.

The mat measures 31.25" by 10". It has a rubber surface with stitched edges and a non-slip back.

Drink like a Starfleet officer with these exclusive mugs straight from the 25th century.

These brushed steel mugs would look right at home in Starfleet. Each one features the logo of a different division: Starfleet Academy in San Francisco, where generations of Starfleet officers have been trained; the Galaxy Class Starship Design Project, which was responsible for designing and building the U.S.S. Enterprise NCC-701-D; and Starfleet Headquarters itself.

The mugs were designed and created by Eaglemoss and are limited edition; exclusively available through MasterReplicas.com.

The mugs are 500ml / 17oz.

Discover the inside story of the rebirth of one of Star Trek’s most beloved sets: the bridge of the U.S.S. Enterprise NCC-1701-D, which made an emotional return in Star Trek: Picard. Art director Liz Kloczkowski was tasked with bringing this iconic set back to life. Now she has written the ultimate insider account, revealing how the art department unearthed every piece of information they could find and, working with an army of skilled crafts people and Star Trek legends, they rebuilt the bridge in immaculate detail. This is an incredibly thorough and detailed account, packed with hundreds of rare photographs, plus original concept art and blueprints. A fascinating look at a unique episode of Star Trek history! Forewords by showrunner Terry Matalas and production designer Dave Blass Afterword by TNG´s original production designer Herman Zimmerman.

"These full-sized replicas of the Space 1999 Stun Gun and Commlock are based on careful study of the original props and feature working lights and sound effects, from the show. Both props use the widely praised Sixteen 12 tooling. The stun gun measures 4.33” (11 cm) from back to front and just over 5” (13 cm) from top to bottom, while the Commlock is just under 8” (20 cm) long, and 2” (5 cm) wide. The original stun guns were carried by Moonbase security guards and stored in racks on the Eagles. In the show they had different settings that included stunning, disintegrating and cutting. The Commlocks were clipped over the crew member’s belt. They were used to communicate with other Alphans, to open doors, and to pinpoint the wearer’s location. "

This is an official licensed replica of the wide-bottomed Raktajino mugs that were used on Star Trek: Deep Space Nine. The mugs were produced by the replicators in the station’s replimat and only came in this distinctive blue colour. In reality, the mugs were produced by a company called Feltman Langer who were based in Los Angeles, California.

The design was known as a “No Spill No Slide” mug and they were originally sold to surf shops up and down the coast before the makers started promoting their use on boats. The Deep Space Nine art department used different mugs for different parts of the station and these were only meant for use on the Promenade.

One of the most terrifying sounds in the Universe is "Moopsy". At first it may sound cute but seconds after you hear it, Moopsy will drink your bones.

This large talking plush reproduces the terror perfectly. Cuddle up to Moopsy if you dare and squeeze Moopsy's paw to hear Moopsy speak.

Moopsy  briefly escaped from captivity in Narj's Miraculous Menagerarium the Star Trek: Lower Decks episode "I Have No Bones Yet I Must Flee".

At 14" long, this Moopsy is also bigger than our original plush.

Size: 14 inches (25 cm )

Turn the sound on in the video to hear Moopsy talk.

Note: When this item ships, batteries will not be included, due to rules over importation and regulations

There's nothing better to cuddle up to than this plush version of Star Trek: Lower Decks Badgey. Sure, he's a psychopath who wants to kill us all, but rendered in plush, he couldn't be cuter or cuddlier.

Badgey was originally a training hologram, who was created by Rutherford. Unfortunately, he was made using unstable AI and, after some holodeck malfunctions, he gained sentience and set out to kill his creator. Despite having his neck broken and his memory wiped, he kept coming back before eventually evolving into a digital god and heading off to create his own universe.

Badgey is the second in Master Replicas Lower Decks plush series and joins Moopsy, which is back in stock after a sell-out first run.

Order now to get the first edition, which comes with a limited-edition Badgey card.

Size: 10 inches x 5.5 inches (25 cm x 14 cm).

Drink like a Starfleet officer with these exclusive mugs straight from the 25th century.

These brushed steel mugs would look right at home in Starfleet. Each one features the logo of a different division: Starfleet Academy in San Francisco, where generations of Starfleet officers have been trained; the Galaxy Class Starship Design Project, which was responsible for designing and building the U.S.S. Enterprise NCC-701-D; and Starfleet Headquarters itself.

The mugs were designed and created by Eaglemoss and are limited edition; exclusively available through MasterReplicas.com.

The mugs are 500ml / 17oz.

"Battles in Time presents the first in a new line of limited-edition collector’s cards focused on the individual Doctors, their companions and their greatest foes. Each set of 15 cards comes in a special collector’s pack that is guaranteed to contain every card. For the first time ever, Battles in Time will feature classic companions Ian, Barbara and Susan and memorable monsters such as Koquillion and the Monoids. The First and Second Doctor cards are printed in the original black and white on silver foil, in strictly limited-edition sets of 1,000 pieces worldwide. These cards are not available anywhere else. "

Battles in Time presents the next in its line of limited-edition collector's cards focused on the individual Doctors, their companions and their greatest foes. Each set of 15 cards comes in a special collector's pack that is guaranteed to contain every card. The Second Doctor set features companions Jamie and Zoe, the TARDIS and Brigadier Lethbridge-Stewart, alongside nine terrifying monsters including a Yeti, an Ice Warrior, the Cybermen and the Dalek Emperor, plus rogue Time Lord the War Lord. Hidden inside one in every ten collector's sets is the rarest card Battles in Time has ever produced: a metal vortex card, in a super limited edition of just 100 worldwide. Only a hundred collectors will ever own one — and there is no other way to get it. The Second Doctor cards are printed in the original black and white on silver foil, in strictly limited-edition sets of 1,000 pieces worldwide. These cards are not available anywhere else.

Challenge your friends to a race through seven years of Star Trek: The Next Generation with this brand new board game. Players draw cards that send them on missions from famous episodes of TNG. Then race around the board trying to complete them first. Along the way you'll face hazards from an intron virus that de-evolves the crew, to a visit from Q.

The game is designed for up to eight players but only the best Starfleet officer will win!

"The Alkesh was a mid-sized vessel that the Goa’uld used as a troop transport and as a bomber. It was capable of traveling faster than light and could enter a planet’s atmosphere, where it was often used to mount “bombing” raids using plasma charges. When it was used as a troop transport, the Jaffa were deployed using transportation rings. The model is based on the original CG asset used on the show and is 7.25” (18.5 cm) long. "

This is an official licensed replica of the wide-bottomed Raktajino mugs that were used on Star Trek: Deep Space Nine. This version carries the logo for Quark’s Bar, something that never actually appeared on screen, where all the mugs like this were produced by the repliactors. In reality, the mugs were produced by a company called Feltman Langer who were based in Los Angeles, California.

The design was known as a “No Spill No Slide” mug and they were originally sold to surf shops up and down the coast before the makers started promoting their use on boats. The Deep Space Nine art department chose the design because they thought it looked suitably alien.

Turn your desk into the bridge of a Constitution-class starship with this extra large desk mat, which is designed to sit under your keyboard and mouse. The artwork is taken directly from displays on the bridge of Captain Kirk's Enterprise as seen in the original series.

The mat measures 31.25" by 10". It has a rubber surface with stitched edges and a non-slip back.

"The Rescue Eagle appeared in several episodes of Space 1999, and played a particular big role in “Earthbound”, which was the fifth episode to be filmed. The rescue pod was painted with distinctive red stripes, suggesting that it was similar to an ambulance. These stunning models are based on the acclaimed Sixteen 12 tooling. This model of the Rescue Eagle Transporter is 5.5 inches (13 cm) long and has a detachable pod. It is a similar size to Master Replicas’ Starship Library series. "

"The Laboratory Eagle appeared in the Space 1999 story “The Metamorph”, which opened the second season and introduced Maya. When two Alphan pilots were captured by Mentor, Commander Koenig took Eagle 4 to retrieve them. He ordered it to be fitted with a laboratory pod and with additional booster engines that were mounted on the top and were designed to increase its power and speed. These stunning models are based on the acclaimed Sixteen 12 tooling. This model of the laboratory Eagle Transporter is 5.5 inches (13 cm) long and has a detachable pod. It is a similar size to Master Replicas’ Starship Library series."

"This is the second in a new line of detailed Stargate desktop replicas, reproducing some of the most iconic props from the classic TV series. This is a beautifully detailed replica of the helmet worn by the Horus Guard. As befits the falcon god, the helmet is designed with the fierce, hooked beak and sculpted headdress of Horus himself. The Horus Guards served Ra and later Heru'ur, and their helmets were among the first sights to greet SG-1 when they stepped through the gate to Abydos - a warning that the gods of Earth's ancient past were very much alive, and still ruling. The replica helmet was digitally sculpted, based on careful study of the original props. It has been cast in polyresin to ensure a high level of accuracy, before being painted. The helmet is the perfect size to sit on a desk or shelf and is just under 6"" (15 cm) tall when displayed on its bespoke stand."