In moments of stress or contemplation, Captain Picard asked the replicator to produce a hot cup of Earl Grey tea. The replicator, knowing exactly what he wanted, produced the tea in an elegant glass cup.

The Star Trek: The Next Generation art department wanted the cup to look both futuristic and timeless. It had to be at home in the 24th century, but it also had to be instantly recognizable. Rather than creating their own tea cup from scratch, they looked for the best examples of modern, twentieth century design.

They settled on a glass tea cup made by European homewares company, Bodum.

The instantly recognizable BISTRO cup became so closely associated with Star Trek, that fans informally refer to it as “The Picard Cup”. It went on to appear in Star Trek: Voyager: Star Trek: Picard.

Volume/Size: 0.2 l – 6.7 fl oz.

This is a replica of the Pegasus gate from Stargate Atlantis. It was discovered in the city of Atlantis after Daniel Jackson realised that, if they had enough power, the stargates could be used to travel between galaxies.

The Atlantis Gate was an upgrade on the SG-1 version. On the show its glyphs appeared digitally, as the crew dialed into a new location. The gate had been left unused for thousands of years after the Ancients fled to the Milky Way after losing their battle with the Wraith, but was revived by the Pegasus team.

The replica gate is made of polystone and comes with a separate display base that carries the Stargate Atlantis logo. Master Replicas has carefully reproduced every glyph on the gate, which was based on a digital model that was supplied by MGM.

This is a stunning, illuminated replica of the ZPM, or Zero Point Module, which is one of the most important artifacts in the Stargate universe. The ZPMs are effectively powerful batteries that were created by the Ancients to power their cities, outposts, and ships. The Ancients and the Asurans are the only races that knew how to create ZPMs. Using them depletes their energy, so they are now very rare and the Atlantis crew were always looking for fully powered versions. Our version stands just over 14” (36 cm) tall. It is illuminated and is  powered by a USB-C cable that plugs into the base. 

The classic Constitution silhouette, reimagined for Strange New Worlds — die-cast, with a 48-page collector book.

This version of the U.S.S. Enterprise debuted at the end of Star Trek: Discovery's first season before taking centre stage in Star Trek: Strange New Worlds under Captain Pike.

Why you'll love it

• A modern reimagining — Matt Jefferies' original blended with the motion-picture Enterprise and subtle nods to the NX-01. Designed by John Eaves, Scott Schneider and William Budge.
• The 48-page collector book — the ship's profile, annotated plans and the story of the design. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

Turn your desk into the bridge of a starship with this extra large desk mat, that's designed to sit under your keyboard and mouse. The mat uses artwork created for Data's Ops station on the U.S.S. Enterprise NCC-1701-D and it's hard to resist tapping it as if you were pressing the buttons.

The mat measures 31.25" by 10". It has a rubber surface with stitched edges and a non-slip back.

"Master Replicas is proud to announce the launch of a brand-new line of officially licensed model ships from Mass Effect.

Leading the launch of this impressive new collectible line is the Normandy SR-2 from Mass Effect 3.

Commander Shepard's legendary vessel has been meticulously crafted in die-cast metal to capture every detail. The model was based on in-game assets to ensure that it is as accurate as possible. It measures 8.66 inches (22 cm) in length, and comes with a stand making it ideal for any collector's shelf or desk.

Discover the inside story of the rebirth of one of Star Trek’s most beloved sets: the bridge of the U.S.S. Enterprise NCC-1701-D, which made an emotional return in Star Trek: Picard. Art director Liz Kloczkowski was tasked with bringing this iconic set back to life. Now she has written the ultimate insider account, revealing how the art department unearthed every piece of information they could find and, working with an army of skilled crafts people and Star Trek legends, they rebuilt the bridge in immaculate detail. This is an incredibly thorough and detailed account, packed with hundreds of rare photographs, plus original concept art and blueprints. A fascinating look at a unique episode of Star Trek history! Forewords by showrunner Terry Matalas and production designer Dave Blass Afterword by TNG´s original production designer Herman Zimmerman.

To celebrate the 25th anniversary of The Matrix, Master Replicas are releasing an incredibly detailed die-cast model of Morpheus's ship The Nebuchadnezzar.

When The Matrix was released in 1999, the Wachowskis changed cinema forever. Sci-fi had never been cooler. The original movie played with huge ideas as Morpheus and his allies freed Neo from his mundane reality and introduced him to the truth: a world where the machines have subjugated humanity.

The Nebuchadnezzar, which was designed by concept artist Tani Kunitake, was at the heart of the story. The Neb was a rusting hovercraft that used EM pulses to protect itself from the machines, as Morpheus and his crew managed to stay one step ahead of the robotic Sentinels.

This impressive die-cast model has been digitally sculpted before being cast in zinc alloy and ABS, and painted by hand. It has been officially licensed by Warner Bros. and is a true collectors item.

The ship measures 11.8 inches (30 cm) long.

The XL USS Orville from Seth McFarlane's sci-fi series.

Eaglemoss only released a limited number of ships from the series, and this is the XL version of the hero ship.

The model is approximately 10.25 inches (26 cm) long.

The ships in The Expanse rely on an Epstein drive to reach the kinds of speed that make interplanetary travel practical. The drive was first tested on a second-hand yacht, and was discovered almost by accident.

This is one of the last models that Eaglemoss produced and we have them all.

Yacht length: 6 inches (16 cm); width: 4.7 inches (12 cm); height: 4.3 inches (11 cm).

"These full-sized replicas of the Space 1999 Stun Gun and Commlock are based on careful study of the original props and feature working lights and sound effects, from the show. Both props use the widely praised Sixteen 12 tooling. The stun gun measures 4.33” (11 cm) from back to front and just over 5” (13 cm) from top to bottom, while the Commlock is just under 8” (20 cm) long, and 2” (5 cm) wide. The original stun guns were carried by Moonbase security guards and stored in racks on the Eagles. In the show they had different settings that included stunning, disintegrating and cutting. The Commlocks were clipped over the crew member’s belt. They were used to communicate with other Alphans, to open doors, and to pinpoint the wearer’s location. "

"This is the first in a new line of models from Space 1999. The Eagle Transporter made its debut in the show’s first episode “Breakaway”, when the moon leaves Earth’s orbit. It is one of the most iconic science fiction vehicles ever made. It was designed by Brian Johnson, who was inspired by his own work for the movie “2001 A Space Odyssey”. The idea was to make it modular, so the central pods could be changed for different missions, and there were several different versions. The Transporter was the standard version. These stunning models are based on the acclaimed Sixteen 12 tooling. This model of the classic Eagle Transporter is 5.5 inches (13 cm) long and has a detachable pod.  It is a similar size to Master Replicas’ Starship Library series."

This is an official licensed replica of the wide-bottomed Raktajino mugs that were used on Star Trek: Deep Space Nine. The mugs were produced by the replicators in the station’s replimat and only came in this distinctive blue colour. In reality, the mugs were produced by a company called Feltman Langer who were based in Los Angeles, California.

The design was known as a “No Spill No Slide” mug and they were originally sold to surf shops up and down the coast before the makers started promoting their use on boats. The Deep Space Nine art department used different mugs for different parts of the station and these were only meant for use on the Promenade.

One of the most terrifying sounds in the Universe is "Moopsy". At first it may sound cute but seconds after you hear it, Moopsy will drink your bones.

This large talking plush reproduces the terror perfectly. Cuddle up to Moopsy if you dare and squeeze Moopsy's paw to hear Moopsy speak.

Moopsy  briefly escaped from captivity in Narj's Miraculous Menagerarium the Star Trek: Lower Decks episode "I Have No Bones Yet I Must Flee".

At 14" long, this Moopsy is also bigger than our original plush.

Size: 14 inches (25 cm )

Turn the sound on in the video to hear Moopsy talk.

Note: When this item ships, batteries will not be included, due to rules over importation and regulations

Destroyers were a pivotal part of the Krill military. A destroyer engaged enemy ships in direct combat, and its bombing capabilities made the ship the ideal choice to attack colony planets from space.

Yet destroyers were more than simple attack ships: the Krill designed them to host entire families, providing living arrangements, religious sanctuaries, and classrooms for children.

The model is approximately 8.66 inches (22 cm) long.

RARE SITE EXCLUSIVE The Kaylon Interceptor from The Orville is the smaller ship with a 'tail' that was carried inside the Kaylon sphere.

The model is just under 7 inches (17.5 cm) long. 

One of the last models Eaglemoss released was the light cycle from the classic 1982 movie 'Tron'. This is the blue version. The red, yellow and orange versions were also released in a limited edition. The film used groundbreaking effects techniques and the cycles themselves were designed by the legendary Syd Mead, who is famous for his work on 'Blade Runner' and 'Aliens'. The Eaglemoss model is 8.7 inches (22 cm) long.

Battles in Time presents the next in its line of limited-edition collector's cards focused on the individual Doctors, their companions and their greatest foes. Each set of 15 cards comes in a special collector's pack that is guaranteed to contain every card. The Second Doctor set features companions Jamie and Zoe, the TARDIS and Brigadier Lethbridge-Stewart, alongside nine terrifying monsters including a Yeti, an Ice Warrior, the Cybermen and the Dalek Emperor, plus rogue Time Lord the War Lord. Hidden inside one in every ten collector's sets is the rarest card Battles in Time has ever produced: a metal vortex card, in a super limited edition of just 100 worldwide. Only a hundred collectors will ever own one — and there is no other way to get it. The Second Doctor cards are printed in the original black and white on silver foil, in strictly limited-edition sets of 1,000 pieces worldwide. These cards are not available anywhere else.

"The Alkesh was a mid-sized vessel that the Goa’uld used as a troop transport and as a bomber. It was capable of traveling faster than light and could enter a planet’s atmosphere, where it was often used to mount “bombing” raids using plasma charges. When it was used as a troop transport, the Jaffa were deployed using transportation rings. The model is based on the original CG asset used on the show and is 7.25” (18.5 cm) long. "

The Sphere, or Cruiser, was the Kaylon's main attack ship. Each Cruiser was equipped with one Interceptor, which served as an auxiliary craft. All spheres were equipped with highly advanced technology, a single central cannon with impressive firepower and a hull that resisted target-locking.

Cruisers are capable of sustained quantum travel at 35 lightyears per hour.

The model is just under 7 inches (17.5 cm) across.