The Moopsy is one of the cuddliest creatures in the Galaxy but watch out — this little ball of cuteness is an alien murderer that will drink your bones.

Moopsy is a fan-favourite alien from Star Trek: Lower Decks. It looks friendly but it can move at lightning-fast speeds and, once it sinks its fangs into its prey, it can drink its bones in seconds.

When it escaped from Narj's Miraculous Menagerarium it killed Narj and two Pyrithian swamp gobblers before Ransom and Mariner lured it back into it's cage. Handle with care!

Size: 10 inches x 5.5 inches (25 cm x 14 cm)

The F-302 fighter interceptor was Earth's first fighter designed to operate in space. It was developed using alien technology that was acquired through the use of the stargates, and was armed with railguns and guided missiles. It had a hyperdrive and could make interstellar journeys.

Length: 4 inches (10 cm); Width: 8 inches (20 cm)

Step on board Captain Kirk's Enterprise with this beautifully detailed toy phaser with authentic lights and sound. This classic toy was originally issued by Diamond Select and was widely praised for its accuracy and functionality. Master Replicas are reissuing it with updated sound effects, which like the ones on the original, were used on the original episodes.

The Type-2 phaser was the pistol version of this classic weapon. The smaller Type-1 phaser slots on to the top and contains the power settings. Turning the dial on the toy version changes the sound effects from low intensity stun or heat to the rarely seen (or heard) overload. The trigger activates the light on the front.

The phaser is full-scale and was carefully modelled on the original prop, making it ideal for cosplay. It takes three LR44 batteries that are fitted to the Type-1 phaser. The batteries are not included.

This is a pre-order that will ship in the second half of 2026

In moments of stress or contemplation, Captain Picard asked the replicator to produce a hot cup of Earl Grey tea. The replicator, knowing exactly what he wanted, produced the tea in an elegant glass cup.

The Star Trek: The Next Generation art department wanted the cup to look both futuristic and timeless. It had to be at home in the 24th century, but it also had to be instantly recognizable. Rather than creating their own tea cup from scratch, they looked for the best examples of modern, twentieth century design.

They settled on a glass tea cup made by European homewares company, Bodum.

The instantly recognizable BISTRO cup became so closely associated with Star Trek, that fans informally refer to it as “The Picard Cup”. It went on to appear in Star Trek: Voyager: Star Trek: Picard.

Volume/Size: 0.2 l – 6.7 fl oz.

The Puddle Jumpers were Ancient ships that were used to fly through the Stargates to different locations in the Pegasus Galaxy. The Master Replicas model is based on the original VFX files that were used on Stargate Atlantis.

The model itself is just under 6 inches (15 cm) long.

Bilskirnir is Thor’s ship, which made its debut in the Stargate SG-1 season 2 episode ‘Thor’s Chariot’, when it saved SG-1 from the Goa’uld. Bilskirnir was an incredibly powerful Asgard mothership with advanced transporter systems, engines that could cover intergalactic distances in hours, and an ion gun that could obliterate a Goa’uld Hat’tak ship.

In Norse mythology 'Bilskirnir' refers to Thor’s hall, where he lived with his wife Sif and their children.

The Master Replicas die-cast model is 15cm long and is based on the original VFX model, which was supplied to us by the production team.

This is a replica of the Pegasus gate from Stargate Atlantis. It was discovered in the city of Atlantis after Daniel Jackson realised that, if they had enough power, the stargates could be used to travel between galaxies.

The Atlantis Gate was an upgrade on the SG-1 version. On the show its glyphs appeared digitally, as the crew dialed into a new location. The gate had been left unused for thousands of years after the Ancients fled to the Milky Way after losing their battle with the Wraith, but was revived by the Pegasus team.

The replica gate is made of polystone and comes with a separate display base that carries the Stargate Atlantis logo. Master Replicas has carefully reproduced every glyph on the gate, which was based on a digital model that was supplied by MGM.

Join an Enterprise landing party with this exceptional toy communicator with authentic lights and sound. This classic toy was originally designed by Diamond Select and was widely praised for its accuracy and functionality. Master Replicas are reissuing it with new sound effects, taken directly from the original Star Trek episodes.

The Star Trek communicator is a classic piece of design that inspired today's mobile phones. It was capable of sending signals across vast distances and was used to establish a transporter lock. This version was used by Captain Kirk and his crew during their first five-year mission.

The toy communicator is full-scale and was carefully modelled on the original prop, making it ideal for cosplay. It is activated by flipping it open. It has nine different sound clips taken from the original Star Trek, a moving moire pattern and working lights. It takes four AAA batteries (batteries not included).

This is a pre-order that will ship in the second half of 2026

The Koto was an MCRN patrol destroyer that was illegally sold to Marco Inaros and became part of the Free Navy. It was one of several ships that attacked the Rocinante in the episode 'Hard Vacuum', when it was disabled by an attack from Drummer's ship.

The Koto was designed by Ryan Dening, who also designed many ships for Star Trek.

It was produced but never sold by Eaglemoss and we have acquired all the stock. Length approximately 9 inches (22 cm).

The California-class star of Star Trek: Lower Decks — die-cast, with a 48-page collector book.

The U.S.S. Cerritos handles second contact, engineering support and supply runs — the unglamorous missions that keep the Federation running, and where Mariner and Boimler served their time as ensigns.

Why you'll love it

• The underdog's underdog — the heart of Lower Decks, and one of Trek's most-loved modern ships.
• Designed by Eric Nyquist with Lower Decks creator Mike McMahan, finalised by Joseph Martinez and Bobby Walker.
• The 48-page collector book — its profile, annotated plans and how Star Trek: Lower Decks was made. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The Pegasus has been out of stock for ages, but it's coming back. New stock will be available in February 2026.

The Pegasus was Admiral Caine's Battlestar in one of the rebooted series' most acclaimed story arcs. It was more advanced and powerful than theGalactica, which it massively outgunned.

Most of the design work on the ship was done by CG modeller Jose Perez who set out to make a state of the art ship that was a contrast to the older Galactica. The model is just under 10.5" (26.5 cm) long.

This is a preorder that will ship from February 2026.

This is a stunning, illuminated replica of the ZPM, or Zero Point Module, which is one of the most important artifacts in the Stargate universe. The ZPMs are effectively powerful batteries that were created by the Ancients to power their cities, outposts, and ships. The Ancients and the Asurans are the only races that knew how to create ZPMs. Using them depletes their energy, so they are now very rare and the Atlantis crew were always looking for fully powered versions. Our version stands just over 14” (36 cm) tall. It is illuminated and is  powered by a USB-C cable that plugs into the base. 

The classic Constitution silhouette, reimagined for Strange New Worlds — die-cast, with a 48-page collector book.

This version of the U.S.S. Enterprise debuted at the end of Star Trek: Discovery's first season before taking centre stage in Star Trek: Strange New Worlds under Captain Pike.

Why you'll love it

• A modern reimagining — Matt Jefferies' original blended with the motion-picture Enterprise and subtle nods to the NX-01. Designed by John Eaves, Scott Schneider and William Budge.
• The 48-page collector book — the ship's profile, annotated plans and the story of the design. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

In the original series the crew regularly drank coffee from grey cups. In one of the most famous incidents, Kirk discovers that tribbles have got into his dinner, eaten his chicken sandwich and drunk his coffee.

The cups were originally made of styrofoam, whereas ours are made of earthenware. We've also added a detail that you might have missed. When the cups first appeared in 'Where No Man Has Gone Before', they featured an Enterprise logo with a wreath, but it never appeared on them again. With a little help, we sourced that logo from Gene Roddenberry's files at UCLA and have included it on our cup. The tribble is removable, so your coffee should be safe.

This model, from Battlestar Galactica: Blood & Chrome shows the Galactica in its prime during the First Cylon War, when it had more gun turrets and heavier armor plating.

The Eaglemoss model is just over 10.5 inches (27 cm) long.

This is a replica of the gate that was found on the Destiny in Stargate Universe. This gate was more primitive than the versions found in the Milky Way Galaxy and had a much shorter range. The glyphs on this gate lit up as they were dialled, and the model shows the address for Earth. The gate had been left unused for thousands of years after the crew left the Destiny, but was revived by the team from Earth, who used it to gather supplies and explore the universe. The replica gate measures 9.25 inches (23.5 cm) across. It is made of polystone and comes with a separate display base that carries the SGU logo. Master Replicas has carefully reproduced every glyph on the gate, which was based on a digital model that was supplied by MGM.

"Master Replicas is proud to announce the launch of a brand-new line of officially licensed model ships from Mass Effect.

Leading the launch of this impressive new collectible line is the Normandy SR-2 from Mass Effect 3.

Commander Shepard's legendary vessel has been meticulously crafted in die-cast metal to capture every detail. The model was based on in-game assets to ensure that it is as accurate as possible. It measures 8.66 inches (22 cm) in length, and comes with a stand making it ideal for any collector's shelf or desk.

Discover the inside story of the rebirth of one of Star Trek’s most beloved sets: the bridge of the U.S.S. Enterprise NCC-1701-D, which made an emotional return in Star Trek: Picard. Art director Liz Kloczkowski was tasked with bringing this iconic set back to life. Now she has written the ultimate insider account, revealing how the art department unearthed every piece of information they could find and, working with an army of skilled crafts people and Star Trek legends, they rebuilt the bridge in immaculate detail. This is an incredibly thorough and detailed account, packed with hundreds of rare photographs, plus original concept art and blueprints. A fascinating look at a unique episode of Star Trek history! Forewords by showrunner Terry Matalas and production designer Dave Blass Afterword by TNG´s original production designer Herman Zimmerman.

To celebrate the 25th anniversary of The Matrix, Master Replicas are releasing an incredibly detailed die-cast model of Morpheus's ship The Nebuchadnezzar.

When The Matrix was released in 1999, the Wachowskis changed cinema forever. Sci-fi had never been cooler. The original movie played with huge ideas as Morpheus and his allies freed Neo from his mundane reality and introduced him to the truth: a world where the machines have subjugated humanity.

The Nebuchadnezzar, which was designed by concept artist Tani Kunitake, was at the heart of the story. The Neb was a rusting hovercraft that used EM pulses to protect itself from the machines, as Morpheus and his crew managed to stay one step ahead of the robotic Sentinels.

This impressive die-cast model has been digitally sculpted before being cast in zinc alloy and ABS, and painted by hand. It has been officially licensed by Warner Bros. and is a true collectors item.

The ship measures 11.8 inches (30 cm) long.

The XL USS Orville from Seth McFarlane's sci-fi series.

Eaglemoss only released a limited number of ships from the series, and this is the XL version of the hero ship.

The model is approximately 10.25 inches (26 cm) long.