Master Replicas, Insight Editions and Legendary Entertainment are proud to present the Harkonnen Ornithopter, a highly-detailed die-cast model of the iconic vehicle that menaced the skies of Arrakis in the Dune motion picture franchise produced by Legendary.

Shown in flight mode, with the landing gear up and the weapons deployed, the model boasts an impressive wingspan of just under two feet and measures 10.5 inches from nose to stern. It ships fully-assembled and painted, making for an exceptional display piece.

The Ornithopters make frequent appearances in Frank Herbert’s original Dune novels. The film’s art department developed different versions for House of Atreides and House of Harkonnen, with the Harkonnen versions being heavily armed. The result: a spectacular design that swoops over the Arrakean desert raining terror on the Fremen and anything in the Harkonnens’ path.

The modern Viper is a careful update of artist Ralph McQuarrie's original design that was created for the 2004 reboot of Battlestar Galactica. Writer and producer Ron D. Moore wanted to make the show about life on an spaceborne aircraft carrier and the Vipers and their pilots were central to his plans. No Viper pilot was more compelling than Starbuck, who had all the skills (and flaws) to make her a great pilot; this version of the model has her call sign on the hull. The model is 10.6 inches (27 cm) long.

Master Replicas is proud to announce the launch of a brand-new line of officially licensed Foundation model ships based on the hit Skydance Television series.

Leading the launch of this incredible new collectible line is the Imperial Jump Ship, a faster-than-light vessel used by the Empire to dominate space travel. This intricately detailed, 10.75-inch die-cast model is crafted using the original CG mesh used by the Foundation VFX team during the making of the series, ensuring an incredible degree of accuracy.

The Tachi was the original name and paint scheme for the Rocinante when it was an MCRN ship. It appeared in the first season of The Expanse before Holden and his crew repainted and renamed it.

The model is 10 inches (25 cm) long.

This is a limited edition of 500 pieces that is exclusively available to club members.

Shipping From: February 2025

Limited Edition • Convention exclusive

Miniature Stargate from SG-1, 4 inches (100 mm) in diameter.

Stargates were travel devices built by the Ancients to move from planet to planet and even galaxy to galaxy by means of artificial wormholes. The technology is at least 50 million years old, and Stargates span many worlds in the known universe. Earth’s first known Stargate is housed in a secret US Air Force military base known as Stargate Command in Colorado Springs, and it is through this gate that the Stargate teams begin their quest to seek technology and allies to defend Earth against the threat from alien civilizations.

This miniature prop replica from Stargate SG-1 is made from polyresin and is painted by hand. It comes with a separate slotted stand for display.

"One episode. One ship. One very big bang. The Replicators were tearing through the Asgard fleet, and Thor needed help. In “Small Victories”, the opening episode of Stargate SG-1 Season 4, Carter joins him far from Earth and finds the Asgard’s newest warship still unfinished. It carries Jack O’Neill’s name, and it’s about to become the most expensive trap in the galaxy. The O’Neill only had one outing, but fans still talk about it. Our model captures it just as it looked on screen, using the original VFX files from the production. What makes it special: Made from the original Stargate SG-1 VFX files, so every curve matches what you saw on screen Die-cast construction, so it feels solid and weighty 170mm long, with a display stand for your shelf or desk Looks great next to our Bilskirnir, Thor’s ship PRE-ORDER: Due to ship to customers in March 2027 Specifications: Length: 170mm (6.69"") Width: 155mm (6.10"") Height: 60mm (2.36"") Material: Die-cast Display stand included Created from the original Stargate SG-1 VFX files Images shown are digital renders and will be replaced with product photography during development Pre-order: due to ship to customers in March 2027 This is a collectible intended for display. It is not a toy and is not suitable for anyone under the age of 14."

Captain Janeway's U.S.S. Voyager — die-cast, with a 48-page collector book.

One of the most famous ships in Starfleet history. In 2371 the U.S.S. Voyager was flung 70,000 light years across the galaxy by the Caretaker. A journey that should have taken 70 years, Janeway's crew made in seven.

Why you'll love it

• The long way home — new species, and the Borg, every step of the way.
• The 48-page collector book — the making of Star Trek: Voyager, from extensive interviews with the show's creators. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The U.S.S. Enterprise NCC-1701-G — a screen-accurate die-cast model with a 48-page collector book.

At the end of Star Trek: Picard, the ship that had served as the U.S.S. Titan-A was renamed in honour of the most famous name in Starfleet — becoming the U.S.S. Enterprise NCC-1701-G. Command passed to Captain Seven of Nine, with Ensign Jack Crusher at the conn.

Why you'll love it

• The legendary name reborn — Seven of Nine's ship, and a new crew for a new era.
• The 48-page collector book — profiles the Enterprise-G and how it carries the Enterprise legacy forward. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The Osiris dates from the first Cylon War and was part of the fleet that featured in Blood & Chrome. It was a stealth frigate, or pocket battleship. The original VFX model was designed by concept artist Richard Livingston.

The Eaglemoss model is just over 10.5 inches (27 cm) long.

The Sovereign-class U.S.S. Enterprise-E — die-cast, with a 48-page collector book.

The Sovereign-class U.S.S. Enterprise-E entered service in 2372 after the loss of the Enterprise-D, again under Captain Picard. It led the fleet that destroyed the Borg cube attacking Earth, exposed the plot against the Ba'ku, and defeated the Romulan Praetor Shinzon.

Why you'll love it

• From First Contact to Nemesis — the Enterprise of the TNG movie era.
• The 48-page collector book — the making of the Next Generation movies. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The U.S.S. Rubidoux from Lower Decks — a limited-edition die-cast with a 48-page collector book.

The California-class U.S.S. Rubidoux was commanded by Captain Dayton. In 2380 it met an entity that fed on its power until it absorbed the whole ship; Dayton and her crew were beamed to safety by the U.S.S. Cerritos moments before the entity merged with the Rubidoux.

Why you'll love it

• Limited edition — only 500 pieces, in command-division red.
• The 48-page collector book — the shared California-class book on the Cerritos and the making of Lower Decks (Mike McMahan interview). More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The Crossfield-class U.S.S. Discovery and its spore drive — die-cast, with a 48-page collector book.

The U.S.S. Discovery was the testbed for the experimental spore drive and served through the Klingon war. This is the original version from the first two seasons of Star Trek: Discovery, before the ship was sent to the 32nd century.

Why you'll love it

• An unmistakable design — by John Eaves with creators Bryan Fuller and Alex Kurtzman, inspired by legendary designer Ken Adam's work on an unmade 1970s Star Trek film.
• The 48-page collector book — the ship's profile, annotated plans and the story of the design. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The Starship Destiny was built by the Ancients and launched more than fifty million years ago. Its role: to seed stargates and investigate a mysterious message hidden in the fabric of the universe. What happened to the ship and her crew is a mystery. The arrival of an expedition from Earth, who activated the the ship’s stargate in 2009, provided the Destiny with a new crew — and a new mission.

The model is made of die-cast and measures 8.75 inches (22 cm) from front to back.

Sisko's cloaked U.S.S. Defiant — die-cast, with a 48-page collector book.

The U.S.S. Defiant was Starfleet's first true warship, built to counter the Borg. Shelved as overpowered and unstable, it was revived once Benjamin Sisko grasped the Dominion threat, assigned to Deep Space 9 and — by agreement with the Romulans — fitted with a cloaking device.

Why you'll love it

• Small ship, big punch — the toughest little ship in Starfleet.
• The 48-page collector book — the design of the Defiant and the creation of the Dominion, with in-depth interviews with the Deep Space Nine creators. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

In the original 1978 show, the Battlestar Galactica was an advanced vessel that led the Colonial fleet. It had a crew of 500 and carried 75 vipers. The ship was designed by concept artist Ralph McQuarrie who started on the new TV show after working on Star Wars. The brief was to create an aircraft carrier and he gave the ship twin pods on outriggers that provided the vipers with a runway they could land on. The model is just over 10.5 inches (27 cm) long.

This version of the Raider was seen in the TV movies Blood & Chrome and Razor. It was the design that was used in the First Cylon War and was an updated version of Ralph McQuarrie's mechanical original, which the production team redesigned to look more advanced.

The model has a wingspan of 7.5 inches (19 cm).

Captain Georgiou's Walker-class U.S.S. Shenzhou — die-cast, with a 48-page collector book.

The Walker-class U.S.S. Shenzhou was commanded by Captain Georgiou and was the first ship to encounter the Klingon T'Kuvma, playing a major role in the Battle at the Binary Stars, where it was critically damaged.

Why you'll love it

• First contact, first shots — the ship that opened Star Trek: Discovery.
• The 48-page collector book — its profile, annotated plans and the design by John Eaves. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

Scar was one of the deadliest Cylon Raiders. It had gained experience as a result of being killed and resurrected many times, and grew more cunning with each resurrection. Starbuck set out to kill it, but was only able to achieve her mission with help from Kat.

Scar measures approximately 10 inches (25.4 cm) in length.

"The ship that broke the galaxy's best fleet. When the Ori launched their Crusade on the Milky Way, they sent these warships first. In "Camelot", the Season 9 finale of Stargate SG-1, four of them came through the Supergate and tore straight through a combined fleet of Earth, Asgard, Jaffa and Tok'ra ships. Guided by the Priors and protected by near-impenetrable shields, they carried the Ori's message from world to world. Our model captures that unmistakable curved hull exactly as it appeared on screen, using the original VFX files from the production. This time, it lights up too. What makes it special: Made from the original Stargate SG-1 VFX files, so every curve matches what you saw on screen A light-up energy ball at the heart of the ship, with a hidden on/off switch Die-cast and ABS construction, so it feels solid and weighty 220mm long, with a display stand for your shelf or desk A companion to Master Replicas' Asgard ship O'Neill and Thor's Bilskirnir PRE-ORDER: Due to ship to customers in April 2027 Specifications: Length: 220mm (8.66") Width: 100mm (3.94") Height: 48mm (1.89") Material: Die-cast and ABS Light-up feature: battery powered, with a hidden on/off switch Display stand included Created from the original Stargate SG-1 VFX files Images shown are digital renders and will be replaced with product photography during development Pre-order: due to ship to customers in April 2027 This is a collectible intended for display. It is not a toy and is not suitable for anyone under the age of 14."

The Expanse collection was launched in the last days of Eaglemoss and had only limited distribution. The first model was an XL version of the series' main ship — the Rocinante, a Martian corvette that ended up under the charge of James Holden.

The Eaglemoss model measures 12.8 inches (32.5 cm) long and comes in its original box.