The Sovereign-class U.S.S. Enterprise-E — die-cast, with a 48-page collector book.

The Sovereign-class U.S.S. Enterprise-E entered service in 2372 after the loss of the Enterprise-D, again under Captain Picard. It led the fleet that destroyed the Borg cube attacking Earth, exposed the plot against the Ba'ku, and defeated the Romulan Praetor Shinzon.

Why you'll love it

• From First Contact to Nemesis — the Enterprise of the TNG movie era.
• The 48-page collector book — the making of the Next Generation movies. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The U.S.S. Rubidoux from Lower Decks — a limited-edition die-cast with a 48-page collector book.

The California-class U.S.S. Rubidoux was commanded by Captain Dayton. In 2380 it met an entity that fed on its power until it absorbed the whole ship; Dayton and her crew were beamed to safety by the U.S.S. Cerritos moments before the entity merged with the Rubidoux.

Why you'll love it

• Limited edition — only 500 pieces, in command-division red.
• The 48-page collector book — the shared California-class book on the Cerritos and the making of Lower Decks (Mike McMahan interview). More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The Crossfield-class U.S.S. Discovery and its spore drive — die-cast, with a 48-page collector book.

The U.S.S. Discovery was the testbed for the experimental spore drive and served through the Klingon war. This is the original version from the first two seasons of Star Trek: Discovery, before the ship was sent to the 32nd century.

Why you'll love it

• An unmistakable design — by John Eaves with creators Bryan Fuller and Alex Kurtzman, inspired by legendary designer Ken Adam's work on an unmade 1970s Star Trek film.
• The 48-page collector book — the ship's profile, annotated plans and the story of the design. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

Sisko's cloaked U.S.S. Defiant — die-cast, with a 48-page collector book.

The U.S.S. Defiant was Starfleet's first true warship, built to counter the Borg. Shelved as overpowered and unstable, it was revived once Benjamin Sisko grasped the Dominion threat, assigned to Deep Space 9 and — by agreement with the Romulans — fitted with a cloaking device.

Why you'll love it

• Small ship, big punch — the toughest little ship in Starfleet.
• The 48-page collector book — the design of the Defiant and the creation of the Dominion, with in-depth interviews with the Deep Space Nine creators. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

In the original 1978 show, the Battlestar Galactica was an advanced vessel that led the Colonial fleet. It had a crew of 500 and carried 75 vipers. The ship was designed by concept artist Ralph McQuarrie who started on the new TV show after working on Star Wars. The brief was to create an aircraft carrier and he gave the ship twin pods on outriggers that provided the vipers with a runway they could land on. The model is just over 10.5 inches (27 cm) long.

The Starship Destiny was built by the Ancients and launched more than fifty million years ago. Its role: to seed stargates and investigate a mysterious message hidden in the fabric of the universe. What happened to the ship and her crew is a mystery. The arrival of an expedition from Earth, who activated the the ship’s stargate in 2009, provided the Destiny with a new crew — and a new mission.

The model is made of die-cast and measures 8.75 inches (22 cm) from front to back.

This version of the Raider was seen in the TV movies Blood & Chrome and Razor. It was the design that was used in the First Cylon War and was an updated version of Ralph McQuarrie's mechanical original, which the production team redesigned to look more advanced.

The model has a wingspan of 7.5 inches (19 cm).

This is a light-up replica of the Master Systems Display (MSD) on the Galaxy-class U.S.S. Enterprise NCC-1701-D — the famous cutaway of the ship that appeared throughout Star Trek: The Next Generation. This upgraded version of the artwork was created by Geoff Mandel, who is a veteran of the Star Trek art department.

The artwork is visible when the power isn’t on, but comes to life when you push the button on the side. It works in a very similar way to the real displays used on the show, with backlit film.

"The Eagle freighters appear in the first episode of Space 1999 “Breakaway”, when the Alphans try to move radioactive waste containers to prevent a massive explosion. The freighters were fitted with winches, and with magnetic grapplers that could lift the radioactive waste containers out of their silos and transport them across the lunar surface. However, the attempt to move the containers was a failure and a massive explosion forced the moon out of Earth’s orbit and into deep space. These stunning models are based on the acclaimed Sixteen 12 tooling. This model of the Eagle Freighter is 5.5 inches (13 cm) long and has a detachable pod. The grappler is magnetic and can be attached to the waste containers that come with the model. It is a similar size to Master Replicas’ Starship Library series."

The bridge of every Starship has a dedication plaque that records where it was built and when it entered service, and lists its class, registry and motto.

Eaglemoss produced a series of plaque replicas, designed to be hung on a wall or displayed on a shelf.

This plaque replicates that of the Crossfield-class U.S.S. Discovery and features the motto "All things can be understood once they are discovered; the point is to discover them."

The plaque measures approximately 9 inches (22 cm) across.

Captain Georgiou's Walker-class U.S.S. Shenzhou — die-cast, with a 48-page collector book.

The Walker-class U.S.S. Shenzhou was commanded by Captain Georgiou and was the first ship to encounter the Klingon T'Kuvma, playing a major role in the Battle at the Binary Stars, where it was critically damaged.

Why you'll love it

• First contact, first shots — the ship that opened Star Trek: Discovery.
• The 48-page collector book — its profile, annotated plans and the design by John Eaves. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

Collect Doctor Who Battles in Time with this set of five Obliterator packs. Each pack contains 6 randomly sorted cards* featuring high-spec UV glossed base cards, stunning rainbow foil enhanced rares, and premium holofoil super rares. Plus, with every pack there is a chance of getting one of the un-numbered, ultra rare Vortex cards, which are printed with new metallic technology. There’s only one of these in every 720 packs! There are 142 Obliterator cards to collect in total featuring characters from the Tenth Doctor right up to the latest series, including Daleks, Cybermen, monsters, villains and companions. Doctor Who Battles in Time: Obliterator is being released in two editions. This Limited Edition is available exclusively from Master Replicas. Every card features a special gold foil Obliterator logo. Watch out for the Unlimited Retail Edition features a silver foil Obliterator logo, which will be released later in 2026. * Cards are randomly sorted and packs are not guaranteed to contain the cards shown.

"The ship that broke the galaxy's best fleet. When the Ori launched their Crusade on the Milky Way, they sent these warships first. In "Camelot", the Season 9 finale of Stargate SG-1, four of them came through the Supergate and tore straight through a combined fleet of Earth, Asgard, Jaffa and Tok'ra ships. Guided by the Priors and protected by near-impenetrable shields, they carried the Ori's message from world to world. Our model captures that unmistakable curved hull exactly as it appeared on screen, using the original VFX files from the production. This time, it lights up too. What makes it special: Made from the original Stargate SG-1 VFX files, so every curve matches what you saw on screen A light-up energy ball at the heart of the ship, with a hidden on/off switch Die-cast and ABS construction, so it feels solid and weighty 220mm long, with a display stand for your shelf or desk A companion to Master Replicas' Asgard ship O'Neill and Thor's Bilskirnir PRE-ORDER: Due to ship to customers in April 2027 Specifications: Length: 220mm (8.66") Width: 100mm (3.94") Height: 48mm (1.89") Material: Die-cast and ABS Light-up feature: battery powered, with a hidden on/off switch Display stand included Created from the original Stargate SG-1 VFX files Images shown are digital renders and will be replaced with product photography during development Pre-order: due to ship to customers in April 2027 This is a collectible intended for display. It is not a toy and is not suitable for anyone under the age of 14."

"This is a light-up replica of the Master Systems Display (MSD) for a Constitution-class Starship, like Captain Kirk’s U.S.S. Enterprise NCC-1701. It was created for the Star Trek: Enterprise story ""In A Mirror Darkly,"" when we discovered that the one of the Enterprise’s sister ships, the U.S.S. Defiant from the original series, had been sent to the Mirror Universe. Concept artist Doug Drexler created the artwork as if it were for the original Enterprise. He was inspired by the kind of graphics that were used on the original show and it shows several familiar locations including the bridge, sickbay, the briefing room and main engineering. The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth. The light panel is 31.5"" (80 cm) long and 10.25"" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film."

"This action figure shows D’Vana Tendi when she was an ensign aboard the U.S.S. Cerritos in the early 2380s. The Cerritos was her first posting after she graduated from Starfleet Academy and she started her career in sickbay before she was assigned to the senior science officer training program. Tendi’s green skin is typical of Orions. She comes with a phaser and a tricorder.  The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows."

This is a full-sized, polyresin replica of the dedication plaque for the U.S.S. Enterprise NCC-1701-A. It was the first time a dedication plaque had said that the Enterprise was a Constitution-class ship.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque.

The plaque confirms that the Enterprise was was launched from Earth's San Francisco Fleet Yards.

In the original Battlestar Galactica Muffit was a robotic recreation of Boxey's pet daggit, which was killed during the Cylon attack. Despite being a robot, Muffit had a real personality, occasionally getting into trouble and saving the day.

This is one of the very few BSG statues that Eaglemoss produced. It stands just over 4.25 inches (11 cm) tall.

The Expanse collection was launched in the last days of Eaglemoss and had only limited distribution. The first model was an XL version of the series' main ship — the Rocinante, a Martian corvette that ended up under the charge of James Holden.

The Eaglemoss model measures 12.8 inches (32.5 cm) long and comes in its original box.

The California-class U.S.S. Merced from Lower Decks — a limited-edition die-cast with a 48-page collector book.

The California-class U.S.S. Merced was transformed in a 2381 terraforming accident. Working with the U.S.S. Cerritos to recover an ancient generation ship, both ships were “infected” with terraforming fluid; the Cerritos reversed the effects, but the Merced was badly damaged.

Why you'll love it

• Limited edition — only 500 pieces, in science-division blue.
• The 48-page collector book — the shared California-class Cerritos / Lower Decks book. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

LIMITED EDITION In the original 1978 Battlestar Galactica, we were told there were twelve battlestars, though only eight were ever named on screen. Three more battlestar names — Solaria, Cerberus and Prometheus — were waiting in the wings, intended to join the Colonial fleet had the series continued. The Battlestar Prometheus is being made in a limited edition of just 500. One of those long-rumoured additions to the fleet, she takes her place at last alongside the Galactica and her sister ships — a piece of Battlestar Galactica lore realised for the very first time. This classic-era battlestar is made from die-cast and ABS, and measures 10.5 inches in length. This is a limited edition that will ship to customers in October.