The mysterious UFOs were at the heart of Gerry Anderson’s live-action television series UFO. These alien craft were never fully explained. We knew very little about their abilities, we only knew that they could travel faster than light, and that they could survive for a limited amount in our atmosphere.

This impressive model, which measures 10 cm (just under 4”) across, is based on the acclaimed Sixteen 12 tooling. It comes with a specially-commissioned base showing the lunar surface.

"In Gerry Anderson’s UFO the interceptors were one-man fighters that were S.H.A.D.O.’s first line of defense against the alien UFOs. They were based on the moon and typically operated in groups of three. Each Interceptor carried a nuclear missile, which the three fighters fired simultaneously to create a wide area of destruction. They were designed to operate in space rather in the Earth’s atmosphere. The die-cast model measures 7” (18 cm) from top to stern, and is based on the acclaimed Sixteen 12 tooling. "

This is the first in a series of briefing packs that provide a unique insight into Star Trek ships. Jett Reno’s Guide to the U.S.S. Athena is an internal document that was created by the Star Trek: Starfleet Academy art department to provide the writers and directors with essential information about the ship. It includes annotated exterior views, information about the ship’s different modes and its transformation and landing procedures, schematics showing the location of all the key systems including classrooms and dorms, and diagrams of all the key sets. The briefing pack consists of 120 pages and comes in a presentation portfolio.

Nine chevrons from home, and your desk finally looks the part. This extra-large desk mat puts the Ancient starship Destiny across your workspace - hull schematics, systems readouts and glowing Ancient interface panels, printed edge to edge in that unmistakable deep-space blue. It sits under your keyboard and your mouse, so the whole setup reads as one console. Why you'll want one: * Full Destiny schematic - the ship rendered as a technical blueprint, with plan, profile and detail views, exactly as the Ancients would have logged her * Ancient interface design - dials, gauges, status blocks and Ancient numerals, inspired by the control interfaces of Stargate Universe * Extra large: 31.25"" x 11.5"" - covers keyboard, mouse and the mug you shouldn't have put there * Smooth, fast mousing surface - consistent glide for work or gaming, with no snagging at the edges * Stitched edges - won't fray or peel at the corners, however hard you type * Non-slip rubber back - stays exactly where you put it, all day * Sharp, saturated print - the fine schematic linework and Ancient text stay crisp, not muddy Most Stargate collectibles live on a shelf. This one you actually use - every day, for hours, under your hands. It's the quiet kind of fandom: nobody on the video call spots it, but you know what you're flying. A proper piece of Stargate on your desk for less than the price of a boxset! A genuinely good gift for the Stargate fan who already owns the Puddle Jumper and the ZPM, and an easy first buy for anyone building a Stargate desk setup. Specifications: Dimensions: 31.25"" x 11.5"" (approx. 79cm x 29cm) Surface: Rubber, printed design Edges: Stitched Backing: Non-slip Use: Desk mat, mouse pad, keyboard mat, looking good Care: Wipe clean with a damp cloth. Do not machine wash. This is an art piece intended for display and use. It is not a toy and is not suitable for anyone under the age of 14."

"The perfect home for the complete Dalek Invasion collection. Strictly limited to 1,000 pieces worldwide. Once they're gone, they're gone. Exclusive to Master Replicas. In the Binder • Specially commissioned limited-edition binder • Holds all 142 regular cards • Side-loading pockets keep cards safely in place • Includes a special oversized collector's card The full set — 142 cards to collect: • 80 Common cards — high-spec UV gloss finish • 45 Rare cards — stunning rainbow foil enhancement • 15 Super Rare cards — premium holofoil • 2 Vortex Metal cards — Gold and Silver — brand-new metallic technology What you'll fill it with: more than 80 different Daleks — from the Skaro city Daleks that confronted the First Doctor to the latest advanced Dalek scouts — alongside the Doctors and companions who faced them. Exhaustively researched with leading Dalek expert Gavin Rymill. Heroes, monsters and epic battles — and the perfect place to keep them all. Pre-order now — ships to customers in early December."

The ship SG-1 kept borrowing. The Goa'uld had motherships and Death Gliders for war, but the Tel'tak was the one that actually got things done. This small cargo ship moved people, supplies and secrets across the galaxy, with a cloaking device and ring transporters on board. It turned up again and again in Stargate SG-1, flown by the Goa'uld, the Tok'ra and, whenever they could get their hands on one, SG-1 themselves. Our model captures the Tel'tak's sleek, curved hull just as it appeared on screen, using the original VFX files from the production. What makes it special: Made from the original Stargate SG-1 VFX files, so every curve matches what you saw on screen Die-cast and ABS construction, so it feels solid and weighty 150mm long, with a display stand for your shelf or desk Looks great next to our Asgard ship O'Neill and Ori Warship PRE-ORDER: Due to ship to customers in May 2027 Specifications: Length: 150mm (5.9") Width: 95mm (3.74") Height: 72mm (2.83") Material: Die-cast and ABS Display stand included Created from the original Stargate SG-1 VFX files Images shown are digital renders and will be replaced with product photography during development Pre-order: due to ship to customers in May 2027 This is a collectible intended for display. It is not a toy and is not suitable for anyone under the age of 14.

"This action figure shows Captain Christopher Pike as he was when he commanded the U.S.S. Enterprise NCC-1701 in the late 2250s – the era covered by Star Trek: Strange New Worlds. He is wearing the standard captain’s tunic; the gold colour indicates that he is in the command division. He comes with a phaser pistol, a phaser rifle, and a communicator.  The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows."

"In Gerry Anderson’s classic 1970 series UFO, S.H.A.D.O. (Supreme Headquarters of the Alien Defense Organisation) used these all-terrain vehicles to track and intercept UFOs. The cab at the front of each mobile had seating for two, while the cabin at the rear could be used for equipment or even a command post. This stunning die-cast model uses the acclaimed Sixteen 12 tooling and features a radar dish. It is 17 cm (just under 6.75”) long and comes with an all-new forest terrain base. "

"On Moonbase Alpha the Eagles were launched from a series of landing pads. The Eagle was designed to land in middle of the red cross, where a corridor would connect to the airlock. The door in the Eagle would then connect to the travel car which ferried the crew to and from the rest of Alpha. This collector’s set consists of a landing pad and a standard Eagle transporter, in perfect scale with one another. The lights around the edge of the pad can be illuminated, the docking tube is motorised and the set produces authentic sounds and dialogue from the series. The Eagle itself is 5.5” long while the landing pad measures an impressive 18” (46 cm) across. "

"Explore Destiny like Eli did. This replica Kino is digitally modelled from screen references to capture its intricate mechanical detail, which is one of the trickiest designs in Stargate Universe to reproduce. Eli Wallace (David Blue) found the Kinos aboard the Ancient ship Destiny in Season 1, Episode 2, ""Air, Part 2"". These small floating reconnaissance drones are flown remotely with a Kino remote. The crew used them to film, scout unexplored parts of the ship and check dangerous environments, and they appear throughout the series. Why you'll love it: Digitally modelled from screen references for accuracy Multi-part cast resin with a hand-finished internal ball Metallic-style paint finish that captures the look of Ancient technology 11cm diameter, ideal for any Stargate collection PRE-ORDER: Due to ship December 2026 Specifications: Diameter: 11cm (4.33"") Materials: Multi-part cast resin Hand-finished internal ball Metallic-style paint finish Digitally modelled from screen references Images show an early sample and will be updated when the final sample arrives Pre-order: due to ship December 2026"

"Turn your desk into an LCARS console. This extra-large desk mat features artwork from the U.S.S. Enterprise NCC-1701-D, the Galaxy-class flagship Captain Jean-Luc Picard commanded in Star Trek: The Next Generation. It shows a Class 1 sensor probe as a Master Systems Display (MSD), in the LCARS style seen on every console aboard the Enterprise-D. It sits under your keyboard and mouse, and it's hard to resist tapping the panels as if you were on the bridge yourself. LCARS (Library Computer Access and Retrieval System) is the computer interface used across Starfleet ships, starbases and space stations. Its touch panels could be reconfigured in seconds to suit the task at hand, so even complex tasks took just a few button presses. Why you'll love it: Artwork from the U.S.S. Enterprise NCC-1701-D Class 1 sensor probe shown as an MSD, in authentic TNG-era LCARS style Extra large, big enough for your keyboard and mouse Smooth rubber surface for fast, even mouse movement Stitched edges that won't fray or peel Non-slip back, so it stays where you put it Pairs with our Enterprise-D Ops Station and Stargazer Conn Station desk mats PRE-ORDER: Due to ship December 2026 Specifications: Series: Star Trek: The Next Generation Dimensions: 31.25"" x 10"" (approx. 79cm x 25cm) Surface: rubber, printed design Edges: stitched Backing: non-slip Care: wipe clean with a damp cloth, do not machine wash Pre-order: due to ship December 2026 PLEASE NOTE: This is an art piece intended for display. It is not a toy and is not suitable for anyone under the age of 14."

Our largest Eagle yet, and the only one that comes with booster engines — four separate modules, magnetically attached, exactly as Alan fitted them in “New Adam, New Eve”. It arrives with its own landing pad and a Moon Buggy: a whole corner of Moonbase Alpha, not just the ship. In the second season story, an incredibly powerful being called Magus kidnaps a team from Moonbase Alpha and prevents the Eagles from taking off to rescue them. Alan’s answer is to fit Eagle One with four additional booster engines, significantly increasing its power. This model recreates that ship — one of the most distinctive Eagle configurations the series produced. Specification Length — 30 cm (roughly 12 inches) Tooling — Sixteen 12 Pod — standard detachable pod included Boosters — four side booster rockets, 6 cm each, attach to the transporter pod with a magnetic plate, display with or without Materials — a mix of die-cast and injection-moulded parts Launch platform — included, a section of Alpha landing pad with surface markings and raised perimeter Also included — a Moon Buggy, separate and removable Heritage — an updated version of the 30 cm die-cast Eagle first released in 2004 Availability — pre-order, shipping February 2027

Star Trek: The Next Generation LCARS Thermos Flask Genuine Thermos performance. Iconic LCARS design. A collector's piece you'll actually use every day. Master Replicas x Thermos have beamed up something special: the classic vacuum flask, reimagined in the unmistakable LCARS interface from the U.S.S. Enterprise-D. This isn't fan merch — it's the real Thermos, wrapped in a design Trekkies will lose their minds over. Why you'll love it: • Authentic LCARS design — the iconic Next Generation control-panel layout in lilac, gold and pink, wrapped right around the flask • Hidden easter eggs — spot the secret drinks menu tucked into the panel: Earl Grey, matcha, hot chocolate, mulled wine & more • Genuine Thermos insulation — vacuum-sealed stainless steel keeps drinks piping hot or ice cold for hours • Flip-top lid + easy-pour spout — one-handed pouring, no unscrewing • Integrated cup included — the lid doubles as a proper mug • 16oz / 500ml • dishwasher safe • built for daily use Arrives in a collector's LCARS gift box Not an afterthought — a beautifully designed, display-worthy presentation box themed to match. It makes this the ultimate gift for the Star Trek fan in your life (or, let's be honest, for yourself). Ready to give, ready to keep. Quietly collectible. Made to last. Genuinely useful. You're getting a licensed collector's edition and a premium Thermos flask you'll reach for every single day — plus a gift box that makes it feel like an occasion. That's not a novelty mug that lives in a cupboard. It's the real thing. Preorder now — expected to ship by the end of 2026.

The U.S.S. Titan-A from Star Trek: Picard — a screen-accurate die-cast model with its own 48-page collector book.

The Titan-A carried Jean-Luc Picard and William Riker through the third and final season of Star Trek: Picard, under Captain Liam Shaw and with Commander Seven of Nine at his side, and survived a last confrontation with the Borg. At the end of her mission she was given a new name and registry — becoming the U.S.S. Enterprise NCC-1701-G.

Why you'll love it

• Straight from Picard's final season — the ship at the centre of the story, and the future Enterprise-G.
• The 48-page collector book — profile, annotated plans and the making of Star Trek: Picard, with behind-the-scenes photography and concept art. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

Build a detailed replica Eagle Transporter from Space 1999 with this fantastic, new brick building set. The Eagles were the transport vehicles on Moonbase Alpha. They were designed by Brian Johnson, who also worked on “2001: A Space Odyssey”, and are among the most memorable spaceships in science-fiction history.

This official construction set features an impressive 2500 pieces. When finished, the highly detailed Eagle is 51.4 cm long and 22.1 cm wide. It has a detachable habitation pod, with a removable roof so you can access the fully-detailed interior . The model is officially licensed by ITV Studio and comes with custom decals straight from the show.

Hero Build is a new construction system that is compatible with all the major block building brands. It’s built to the highest standards for seamless integration. The Hero Build bricks can be used for any number of projects, but Master Replicas is issuing a series of officially licensed sets focusing on some of the world’s most beloved TV and movie properties.

"Moonbase Alpha's iconic workhorse, in stunning 12"" die-cast. The Eagle Transporter is one of the most recognisable spacecraft in science fiction. Brian Johnson's design looks as believable today as it did in 1975. This model shows it in its standard configuration, faithfully capturing the white tubular framework, forward command module, powerful rear engines and substantial landing gear. Built on the original Sixteen 12 tooling, it has the attention to detail that range was famous for. The central pod detaches, just as it did for the transport, reconnaissance and rescue missions in the series. It comes with a display platform modelled on a section of Alpha landing pad. Specifications: Length: 30cm (approx. 12"") Tooling: Sixteen 12 Construction: Die-cast and injection-moulded parts Pod: Standard detachable pod Display platform: Included, a section of Alpha landing pad with surface markings and raised perimeter Pre-order now — ships March 2027. This is a collectible intended for display. It is not a toy and is not suitable for anyone under the age of 14."

Collectors edition, fully articulated figure of The Master. Featuring a fully realised likeness of Roger Delgado, authentically styled costume, highly detailed accessories and display base. Packaged in full-colour display box.

"The best ship in the fleet, in its original Cerberus colours. Rebuilt by Cerberus after the original was lost, the Normandy SR-2 carried Commander Shepard and the crew through Mass Effect 2 and the suicide mission. Faster, bigger and smarter than its predecessor, with EDI watching over every system, it's the ship fans remember as home. For N7 Day, our die-cast Normandy SR-2 returns in the black and yellow Cerberus colours it wore in Mass Effect 2. Why you'll love it • The Normandy SR-2 as it first appeared in Mass Effect 2, in Cerberus black and yellow • Accurate to the game, made from the original in-game assets • Die-cast metal, so it feels solid and weighty • 8.66"" (22 cm) long, with a display stand for your shelf or desk • Looks great next to the Sovereign and our Mass Effect 3 Normandy SR-2 Please note: images are based on a digital render. We'll update them with photos of the actual product as it moves through development. PRE-ORDER: Due to ship March 2027 Specifications • Length: 8.66"" (22 cm) • Finish: Cerberus black and yellow (Mass Effect 2) • Material: Die-cast metal • Edition: [LIMITED OR OPEN EDITION TBC] • Display stand included • Made from the original in-game assets • Images shown are digital renders and will be replaced with product photography during development • Pre-order: due to ship March 2027 This is a collectible intended for display. It is not a toy and is not suitable for anyone under the age of 14."

"This is a light-up replica of the Master Systems Display (MSD) of the Odyssey-class U.S.S. Enterprise NCC-1701-F, which was created for Star Trek Online. The artwork is packed with detail showing the location of all the key systems, from the Armory to the Warp Core Ejection Hatch. The artwork is visible when the power isn’t on, but comes to life when you push the button on the side. It works in a very similar way to the real displays used on the show, with backlit film. The light panel is 31.5 inches (80 cm) long and 10.25 inches (26.5 cm) high."

The Geth Dreadnought has arrived! This detailed die-cast replica is built from the in-game model, so every detail of the Reaper-enhanced warship from Mass Effect 3 is just as you remember it. The Geth Dreadnought is substantially larger than a Systems Alliance dreadnought and is an intimidating sight. These massive flagships carry an array of powerful upgrades and armaments compared to their Alliance counterparts. Shepard boards one of these ships during the Priority: Geth Dreadnought mission, infiltrating it in orbit above Rannoch. Why you'll love it: Accurate to the game, made from the original in-game files Die-cast metal with ABS parts, so it feels solid and weighty 220mm long, with a display stand for your shelf or desk Looks great next to our Normandy SR-2 Please note: images are based on a digital render. We'll update them with photos of the actual product as it moves through development. PRE-ORDER: Due to ship April 2027 Specifications: Length: 220mm (8.66") Materials: Die-cast metal and ABS Display stand included Made from the in-game model Images shown are digital renders and will be replaced with product photography during development Pre-order: due to ship March 2027