This is an official licensed replica of the wide-bottomed Raktajino mugs that were used on Star Trek: Deep Space Nine. The mugs were produced by the replicators in the station’s replimat and only came in this distinctive blue colour. In reality, the mugs were produced by a company called Feltman Langer who were based in Los Angeles, California.

The design was known as a “No Spill No Slide” mug and they were originally sold to surf shops up and down the coast before the makers started promoting their use on boats. The Deep Space Nine art department used different mugs for different parts of the station and these were only meant for use on the Promenade.

The classic Constitution silhouette, reimagined for Strange New Worlds — die-cast, with a 48-page collector book.

This version of the U.S.S. Enterprise debuted at the end of Star Trek: Discovery's first season before taking centre stage in Star Trek: Strange New Worlds under Captain Pike.

Why you'll love it

• A modern reimagining — Matt Jefferies' original blended with the motion-picture Enterprise and subtle nods to the NX-01. Designed by John Eaves, Scott Schneider and William Budge.
• The 48-page collector book — the ship's profile, annotated plans and the story of the design. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The California-class star of Star Trek: Lower Decks — die-cast, with a 48-page collector book.

The U.S.S. Cerritos handles second contact, engineering support and supply runs — the unglamorous missions that keep the Federation running, and where Mariner and Boimler served their time as ensigns.

Why you'll love it

• The underdog's underdog — the heart of Lower Decks, and one of Trek's most-loved modern ships.
• Designed by Eric Nyquist with Lower Decks creator Mike McMahan, finalised by Joseph Martinez and Bobby Walker.
• The 48-page collector book — its profile, annotated plans and how Star Trek: Lower Decks was made. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

One of the most terrifying sounds in the Universe is "Moopsy". At first it may sound cute but seconds after you hear it, Moopsy will drink your bones.

This large talking plush reproduces the terror perfectly. Cuddle up to Moopsy if you dare and squeeze Moopsy's paw to hear Moopsy speak.

Moopsy  briefly escaped from captivity in Narj's Miraculous Menagerarium the Star Trek: Lower Decks episode "I Have No Bones Yet I Must Flee".

At 14" long, this Moopsy is also bigger than our original plush.

Size: 14 inches (25 cm )

Turn the sound on in the video to hear Moopsy talk.

Note: When this item ships, batteries will not be included, due to rules over importation and regulations

The original 2250s D7 battle cruiser — die-cast, with a 48-page collector book.

The D7 is one of the most important ships in the Klingon fleet. This is the original version of the class, commissioned by High Chancellor L'Rell to unite the Klingon Houses, and seen on both Discovery and Strange New Worlds.

Why you'll love it

• A design with heritage — by Ryan Dening, honouring Matt Jefferies' original and the Motion Picture redesign.
• The 48-page collector book — in-depth articles from new interviews with Bryan Fuller and Kirsten Beyer, plus original production artwork. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The modern Viper is a careful update of artist Ralph McQuarrie's original design that was created for the 2004 reboot of Battlestar Galactica. Writer and producer Ron D. Moore wanted to make the show about life on an spaceborne aircraft carrier and the Vipers and their pilots were central to his plans. No Viper pilot was more compelling than Starbuck, who had all the skills (and flaws) to make her a great pilot; this version of the model has her call sign on the hull. The model is 10.6 inches (27 cm) long.

The Pegasus has been out of stock for ages, but it's coming back. New stock will be available in February 2026.

The Pegasus was Admiral Caine's Battlestar in one of the rebooted series' most acclaimed story arcs. It was more advanced and powerful than theGalactica, which it massively outgunned.

Most of the design work on the ship was done by CG modeller Jose Perez who set out to make a state of the art ship that was a contrast to the older Galactica. The model is just under 10.5" (26.5 cm) long.

This is a preorder that will ship from February 2026.

This is a light-up replica of the Master Systems Display (MSD) on the Sovereign-class U.S.S. Enterprise NCC-1701-E. . The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth.

The light panel is 31.5" (80 cm) long and 10.25" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film.

Bilskirnir is Thor’s ship, which made its debut in the Stargate SG-1 season 2 episode ‘Thor’s Chariot’, when it saved SG-1 from the Goa’uld. Bilskirnir was an incredibly powerful Asgard mothership with advanced transporter systems, engines that could cover intergalactic distances in hours, and an ion gun that could obliterate a Goa’uld Hat’tak ship.

In Norse mythology 'Bilskirnir' refers to Thor’s hall, where he lived with his wife Sif and their children.

The Master Replicas die-cast model is 15cm long and is based on the original VFX model, which was supplied to us by the production team.

This is a light-up replica of the Master Systems Display (MSD) on the U.S.S. Defiant. The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth.

The light panel is 31.5" (80 cm) long and 10.25" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film.

Turn your desk into the bridge of a starship with this extra large desk mat, designed to sit under your keyboard and mouse. The mat uses artwork created for the Conn station on the U.S.S. Stargazer in Season 2 of Star Trek: Picard, and it's almost impossible to resist tapping it as if you were pressing the buttons.

The mat measures 31.25" by 11.5". It has a rubber surface with stitched edges and a non-slip back.

This is an official licensed replica of the wide-bottomed Raktajino mugs that were used on Star Trek: Deep Space Nine. This version of the mug carries the show’s logo. In reality, the mugs were produced by a company called Feltman Langer who were based in Los Angeles, California.

The design was known as a “No Spill No Slide” mug and they were originally sold to surf shops up and down the coast before the makers started promoting their use on boats. The Deep Space Nine art department used different mugs for different parts of the station and style of mug only appeared on the Promenade.

We've given the X-303 class Prometheus an upgrade. This was one of the last models that Eaglemoss produced and it didn't match their usual standards. For our new version, we've increased the weight and added more detail to the paint scheme.

The Prometheus was the first interstellar battleship developed by Earth. It was based on reverse-engineered Goa'uld technology and was later updated with Asgardian equipment to help it fight the Replicators. It played a vital role in defeating the System Lords. It was eventually destroyed by an Ori satellite.

The model is 7 inches (18 cm) long.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Defiant. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that the Defiant was the first starship in its class and was launched from the Antares ship yards on Stardate 47538.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Deep Space Nine.

The Viper MK VII was the modern design of fighter that was in service when the Cylons launched their attack on the 12 Colonies. It had the same basic layout as earlier models of Viper but its computer systems were vulnerable to Cylon attack. After they escaped, both the Galactica and Pegasus produced versions without the vulnerable computer systems.

The Eaglemoss model measures just over 10.5 inches (27 cm) long and features Captain Lee Adama's "Apollo" call sign on the hull.

JJ Abrams' sleeker, bolder 2009 Enterprise — die-cast, with a 48-page collector book.

When Star Trek was rebooted for the big screen in 2009, the creators redesigned the Enterprise to look sleeker and sexier than ever — the “hotrod” version, as director JJ Abrams put it. It also appeared in Star Trek Into Darkness before being modified for Star Trek Beyond.

Why you'll love it

• Three films of history — the reboot Enterprise across the Kelvin-timeline trilogy.
• Designed by Ryan Church, famed for his work on the Star Wars films.
• The 48-page collector book — its profile, annotated plans and the story of the design. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

This is a replica of the gate that was found on the Destiny in Stargate Universe. This gate was more primitive than the versions found in the Milky Way Galaxy and had a much shorter range. The glyphs on this gate lit up as they were dialled, and the model shows the address for Earth. The gate had been left unused for thousands of years after the crew left the Destiny, but was revived by the team from Earth, who used it to gather supplies and explore the universe. The replica gate measures 9.25 inches (23.5 cm) across. It is made of polystone and comes with a separate display base that carries the SGU logo. Master Replicas has carefully reproduced every glyph on the gate, which was based on a digital model that was supplied by MGM.

The original series Cylon Baseships consisted of twin discs built around a central column. They served as both heavily armed warships and carriers for the smaller Cylon Raiders. They were designed by legendary concept artist Ralph McQuarrie, who worked on Battlestar Galactica after his concept work for Star Wars.

The model measures approximately 6 inches (15.5 cm) across.

Challenge your friends to a race through seven years of Star Trek: The Next Generation with this brand new board game. Players draw cards that send them on missions from famous episodes of TNG. Then race around the board trying to complete them first. Along the way you'll face hazards from an intron virus that de-evolves the crew, to a visit from Q.

The game is designed for up to eight players but only the best Starfleet officer will win!

Captain Georgiou's Walker-class U.S.S. Shenzhou — die-cast, with a 48-page collector book.

The Walker-class U.S.S. Shenzhou was commanded by Captain Georgiou and was the first ship to encounter the Klingon T'Kuvma, playing a major role in the Battle at the Binary Stars, where it was critically damaged.

Why you'll love it

• First contact, first shots — the ship that opened Star Trek: Discovery.
• The 48-page collector book — its profile, annotated plans and the design by John Eaves. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.