In moments of stress or contemplation, Captain Picard asked the replicator to produce a hot cup of Earl Grey tea. The replicator, knowing exactly what he wanted, produced the tea in an elegant glass cup.

The Star Trek: The Next Generation art department wanted the cup to look both futuristic and timeless. It had to be at home in the 24th century, but it also had to be instantly recognizable. Rather than creating their own tea cup from scratch, they looked for the best examples of modern, twentieth century design.

They settled on a glass tea cup made by European homewares company, Bodum.

The instantly recognizable BISTRO cup became so closely associated with Star Trek, that fans informally refer to it as “The Picard Cup”. It went on to appear in Star Trek: Voyager: Star Trek: Picard.

Volume/Size: 0.2 l – 6.7 fl oz.

This is a stunning, illuminated replica of the ZPM, or Zero Point Module, which is one of the most important artifacts in the Stargate universe. The ZPMs are effectively powerful batteries that were created by the Ancients to power their cities, outposts, and ships. The Ancients and the Asurans are the only races that knew how to create ZPMs. Using them depletes their energy, so they are now very rare and the Atlantis crew were always looking for fully powered versions. Our version stands just over 14” (36 cm) tall. It is illuminated and is  powered by a USB-C cable that plugs into the base. 

Turn your desk into the bridge of a starship with this extra large desk mat, that's designed to sit under your keyboard and mouse. The mat uses artwork created for Data's Ops station on the U.S.S. Enterprise NCC-1701-D and it's hard to resist tapping it as if you were pressing the buttons.

The mat measures 31.25" by 10". It has a rubber surface with stitched edges and a non-slip back.

In the original series the crew regularly drank coffee from grey cups. In one of the most famous incidents, Kirk discovers that tribbles have got into his dinner, eaten his chicken sandwich and drunk his coffee.

The cups were originally made of styrofoam, whereas ours are made of earthenware. We've also added a detail that you might have missed. When the cups first appeared in 'Where No Man Has Gone Before', they featured an Enterprise logo with a wreath, but it never appeared on them again. With a little help, we sourced that logo from Gene Roddenberry's files at UCLA and have included it on our cup. The tribble is removable, so your coffee should be safe.

"These full-sized replicas of the Space 1999 Stun Gun and Commlock are based on careful study of the original props and feature working lights and sound effects, from the show. Both props use the widely praised Sixteen 12 tooling. The stun gun measures 4.33” (11 cm) from back to front and just over 5” (13 cm) from top to bottom, while the Commlock is just under 8” (20 cm) long, and 2” (5 cm) wide. The original stun guns were carried by Moonbase security guards and stored in racks on the Eagles. In the show they had different settings that included stunning, disintegrating and cutting. The Commlocks were clipped over the crew member’s belt. They were used to communicate with other Alphans, to open doors, and to pinpoint the wearer’s location. "

This is a light-up replica of the Master Systems Display (MSD) on the U.S.S. Defiant. The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth.

The light panel is 31.5" (80 cm) long and 10.25" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film.

This is a light-up replica of the Master Systems Display (MSD) on the Sovereign-class U.S.S. Enterprise NCC-1701-E. . The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth.

The light panel is 31.5" (80 cm) long and 10.25" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film.

Turn your desk into the bridge of a Constitution-class starship with this extra large desk mat, which is designed to sit under your keyboard and mouse. The artwork is taken directly from displays on the bridge of Captain Kirk's Enterprise as seen in the original series.

The mat measures 31.25" by 10". It has a rubber surface with stitched edges and a non-slip back.

Turn your desk into the bridge of a starship with this extra large desk mat, designed to sit under your keyboard and mouse. The mat uses artwork created for the Conn station on the U.S.S. Stargazer in Season 2 of Star Trek: Picard, and it's almost impossible to resist tapping it as if you were pressing the buttons.

The mat measures 31.25" by 11.5". It has a rubber surface with stitched edges and a non-slip back.

This is a light-up replica of the Master Systems Display (MSD) on the Galaxy-class U.S.S. Enterprise NCC-1701-D — the famous cutaway of the ship that appeared throughout Star Trek: The Next Generation. This upgraded version of the artwork was created by Geoff Mandel, who is a veteran of the Star Trek art department.

The artwork is visible when the power isn’t on, but comes to life when you push the button on the side. It works in a very similar way to the real displays used on the show, with backlit film.

"This is a light-up replica of the Master Systems Display (MSD) for a Constitution-class Starship, like Captain Kirk’s U.S.S. Enterprise NCC-1701. It was created for the Star Trek: Enterprise story ""In A Mirror Darkly,"" when we discovered that the one of the Enterprise’s sister ships, the U.S.S. Defiant from the original series, had been sent to the Mirror Universe. Concept artist Doug Drexler created the artwork as if it were for the original Enterprise. He was inspired by the kind of graphics that were used on the original show and it shows several familiar locations including the bridge, sickbay, the briefing room and main engineering. The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth. The light panel is 31.5"" (80 cm) long and 10.25"" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film."

Nine chevrons from home, and your desk finally looks the part. This extra-large desk mat puts the Ancient starship Destiny across your workspace - hull schematics, systems readouts and glowing Ancient interface panels, printed edge to edge in that unmistakable deep-space blue. It sits under your keyboard and your mouse, so the whole setup reads as one console. Why you'll want one: * Full Destiny schematic - the ship rendered as a technical blueprint, with plan, profile and detail views, exactly as the Ancients would have logged her * Ancient interface design - dials, gauges, status blocks and Ancient numerals, inspired by the control interfaces of Stargate Universe * Extra large: 31.25"" x 11.5"" - covers keyboard, mouse and the mug you shouldn't have put there * Smooth, fast mousing surface - consistent glide for work or gaming, with no snagging at the edges * Stitched edges - won't fray or peel at the corners, however hard you type * Non-slip rubber back - stays exactly where you put it, all day * Sharp, saturated print - the fine schematic linework and Ancient text stay crisp, not muddy Most Stargate collectibles live on a shelf. This one you actually use - every day, for hours, under your hands. It's the quiet kind of fandom: nobody on the video call spots it, but you know what you're flying. A proper piece of Stargate on your desk for less than the price of a boxset! A genuinely good gift for the Stargate fan who already owns the Puddle Jumper and the ZPM, and an easy first buy for anyone building a Stargate desk setup. Specifications: Dimensions: 31.25"" x 11.5"" (approx. 79cm x 29cm) Surface: Rubber, printed design Edges: Stitched Backing: Non-slip Use: Desk mat, mouse pad, keyboard mat, looking good Care: Wipe clean with a damp cloth. Do not machine wash. This is an art piece intended for display and use. It is not a toy and is not suitable for anyone under the age of 14."

"On Moonbase Alpha the Eagles were launched from a series of landing pads. The Eagle was designed to land in middle of the red cross, where a corridor would connect to the airlock. The door in the Eagle would then connect to the travel car which ferried the crew to and from the rest of Alpha. This collector’s set consists of a landing pad and a standard Eagle transporter, in perfect scale with one another. The lights around the edge of the pad can be illuminated, the docking tube is motorised and the set produces authentic sounds and dialogue from the series. The Eagle itself is 5.5” long while the landing pad measures an impressive 18” (46 cm) across. "

"Explore Destiny like Eli did. This replica Kino is digitally modelled from screen references to capture its intricate mechanical detail, which is one of the trickiest designs in Stargate Universe to reproduce. Eli Wallace (David Blue) found the Kinos aboard the Ancient ship Destiny in Season 1, Episode 2, ""Air, Part 2"". These small floating reconnaissance drones are flown remotely with a Kino remote. The crew used them to film, scout unexplored parts of the ship and check dangerous environments, and they appear throughout the series. Why you'll love it: Digitally modelled from screen references for accuracy Multi-part cast resin with a hand-finished internal ball Metallic-style paint finish that captures the look of Ancient technology 11cm diameter, ideal for any Stargate collection PRE-ORDER: Due to ship December 2026 Specifications: Diameter: 11cm (4.33"") Materials: Multi-part cast resin Hand-finished internal ball Metallic-style paint finish Digitally modelled from screen references Images show an early sample and will be updated when the final sample arrives Pre-order: due to ship December 2026"

"Turn your desk into an LCARS console. This extra-large desk mat features artwork from the U.S.S. Enterprise NCC-1701-D, the Galaxy-class flagship Captain Jean-Luc Picard commanded in Star Trek: The Next Generation. It shows a Class 1 sensor probe as a Master Systems Display (MSD), in the LCARS style seen on every console aboard the Enterprise-D. It sits under your keyboard and mouse, and it's hard to resist tapping the panels as if you were on the bridge yourself. LCARS (Library Computer Access and Retrieval System) is the computer interface used across Starfleet ships, starbases and space stations. Its touch panels could be reconfigured in seconds to suit the task at hand, so even complex tasks took just a few button presses. Why you'll love it: Artwork from the U.S.S. Enterprise NCC-1701-D Class 1 sensor probe shown as an MSD, in authentic TNG-era LCARS style Extra large, big enough for your keyboard and mouse Smooth rubber surface for fast, even mouse movement Stitched edges that won't fray or peel Non-slip back, so it stays where you put it Pairs with our Enterprise-D Ops Station and Stargazer Conn Station desk mats PRE-ORDER: Due to ship December 2026 Specifications: Series: Star Trek: The Next Generation Dimensions: 31.25"" x 10"" (approx. 79cm x 25cm) Surface: rubber, printed design Edges: stitched Backing: non-slip Care: wipe clean with a damp cloth, do not machine wash Pre-order: due to ship December 2026 PLEASE NOTE: This is an art piece intended for display. It is not a toy and is not suitable for anyone under the age of 14."

"This is a light-up replica of the Master Systems Display (MSD) of the Odyssey-class U.S.S. Enterprise NCC-1701-F, which was created for Star Trek Online. The artwork is packed with detail showing the location of all the key systems, from the Armory to the Warp Core Ejection Hatch. The artwork is visible when the power isn’t on, but comes to life when you push the button on the side. It works in a very similar way to the real displays used on the show, with backlit film. The light panel is 31.5 inches (80 cm) long and 10.25 inches (26.5 cm) high."

"OUR BIGGEST LIGHT-UP PANEL YET 80 × 45 cm of screen-accurate starship, backlit at the touch of a button. This is a light-up replica of the Master Systems Display for the U.S.S. Cerritos, the California-class starship at the heart of Star Trek: Lower Decks — using the artwork created for the show by legendary Star Trek scenic artist Mike Okuda. Switched off, it’s a striking piece of Star Trek art. Switched on, it glows to life just like the displays on screen. Why you’ll love it • Our biggest panel yet — a commanding 80 × 45 cm (31.5"" × 17.7"") statement piece for any wall. The U.S.S. Cerrritos MSD is the same width as the other MSDs in the collection and is designed to be displayed alongside them. • Backlit film technology — press the button and the ship’s systems glow to life, using the same technology as Star Trek: The Next Generation. • Incredible artwork — spectacular switched on, and a striking piece of art when switched off, with high-resolution detailed artwork you can study in depth. • Densely labelled, screen-used artwork — created by Mike Okuda for the TV show. The MSD shows detailed ship schematics showing the ship from starboard, above, front and back with the key systems called out: warp core, impulse reactors, shuttlebay, phaser arrays and navigational deflector. • Easter Eggs – the MSD is packed with detail including the location of Cetacean Ops and the highly-classified Rubber Ducky room. • Collector-grade and officially licensed — built to the exacting Master Replicas standard as an official Star Trek: Lower Decks collectible. • Plug in and go — ready to hang on a wall or stand on a shelf. Specifications • Dimensions: 31.5"" × 17.7"" (80 × 45 cm) • Illumination: backlit film, one-button on / off • In the box: USB-C cable included (mains USB plug not included) • Mounting: wall-mountable or freestanding • Licence: officially licensed Star Trek: Lower Decks collectible by Master Replicas

Limited Edition Convention exclusive
Set of two official prop replica coins in a presentation box.

Trantor’s imperial coins are used as currency from the Core to the outer reach. Both coins depict a stylized image of the emperor on one face, with differing symbols on the reverse.

"THE ROCINANTE'S DOOR SYSTEM Martian naval hardware, backlit at the touch of a button. This is a light-up replica of the door system display from the Rocinante, the MCRN corvette at the heart of The Expanse. It's the panel a crew member glanced at before stepping through: system integrity at 98.35%, external and internal pressure holding, oxygen/CO2 in range, and the primary lock CPS-04 sitting green and UNLOCKED. Switched off, it's a striking piece of sci-fi art. Switched on, it glows to life just like the displays on screen. Why you'll love it Our first portrait panel — 55 × 23 cm (21.7"" × 9"") standing tall, a new shape for the light-up panel collection and designed to be displayed alongside it. Backlit film technology — press the button and the ship's systems glow to life, the same way the displays worked on the Roci's set. Screen-accurate artwork — the MCRN corvette door system graphics created for the series, reproduced in full detail. Densely detailed, screen-used artwork — pressure and oxygen bars, locking system counters, power status, and the MCRN's own safety warning, all there to study in depth. Collector-grade and officially licensed — built to the exacting Master Replicas standard as an official The Expanse collectible. Plug in and go — ready to hang on a wall or stand on a shelf. Specifications Dimensions: 21.7"" × 9"" (550 × 230 mm), portrait Illumination: backlit film, one-button on / off In the box: USB-C cable included (mains USB plug not included) Mounting: wall-mountable or freestanding Licensing: officially licensed The Expanse collectible by Master Replicas This is a presale product, shipping December 2026."

Turn your desk into the command deck of a Klingon K’t’inga-class battlecruiser with this extra-large desk mat, designed to sit under your keyboard and mouse. The mat uses authentic Klingon console artwork, which was created by Geoff Mandel for the Star Trek: Voyager episode “Prophecy”. The artwork gives you a chance to examine a screen-used graphic up close and personal, and it’s hard to resist working the controls as if you were commanding the ship yourself.