In moments of stress or contemplation, Captain Picard asked the replicator to produce a hot cup of Earl Grey tea. The replicator, knowing exactly what he wanted, produced the tea in an elegant glass cup.

The Star Trek: The Next Generation art department wanted the cup to look both futuristic and timeless. It had to be at home in the 24th century, but it also had to be instantly recognizable. Rather than creating their own tea cup from scratch, they looked for the best examples of modern, twentieth century design.

They settled on a glass tea cup made by European homewares company, Bodum.

The instantly recognizable BISTRO cup became so closely associated with Star Trek, that fans informally refer to it as “The Picard Cup”. It went on to appear in Star Trek: Voyager: Star Trek: Picard.

Volume/Size: 0.2 l – 6.7 fl oz.

The classic Constitution silhouette, reimagined for Strange New Worlds — die-cast, with a 48-page collector book.

This version of the U.S.S. Enterprise debuted at the end of Star Trek: Discovery's first season before taking centre stage in Star Trek: Strange New Worlds under Captain Pike.

Why you'll love it

• A modern reimagining — Matt Jefferies' original blended with the motion-picture Enterprise and subtle nods to the NX-01. Designed by John Eaves, Scott Schneider and William Budge.
• The 48-page collector book — the ship's profile, annotated plans and the story of the design. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

Turn your desk into the bridge of a starship with this extra large desk mat, that's designed to sit under your keyboard and mouse. The mat uses artwork created for Data's Ops station on the U.S.S. Enterprise NCC-1701-D and it's hard to resist tapping it as if you were pressing the buttons.

The mat measures 31.25" by 10". It has a rubber surface with stitched edges and a non-slip back.

Discover the inside story of the rebirth of one of Star Trek’s most beloved sets: the bridge of the U.S.S. Enterprise NCC-1701-D, which made an emotional return in Star Trek: Picard. Art director Liz Kloczkowski was tasked with bringing this iconic set back to life. Now she has written the ultimate insider account, revealing how the art department unearthed every piece of information they could find and, working with an army of skilled crafts people and Star Trek legends, they rebuilt the bridge in immaculate detail. This is an incredibly thorough and detailed account, packed with hundreds of rare photographs, plus original concept art and blueprints. A fascinating look at a unique episode of Star Trek history! Forewords by showrunner Terry Matalas and production designer Dave Blass Afterword by TNG´s original production designer Herman Zimmerman.

This is an official licensed replica of the wide-bottomed Raktajino mugs that were used on Star Trek: Deep Space Nine. The mugs were produced by the replicators in the station’s replimat and only came in this distinctive blue colour. In reality, the mugs were produced by a company called Feltman Langer who were based in Los Angeles, California.

The design was known as a “No Spill No Slide” mug and they were originally sold to surf shops up and down the coast before the makers started promoting their use on boats. The Deep Space Nine art department used different mugs for different parts of the station and these were only meant for use on the Promenade.

One of the most terrifying sounds in the Universe is "Moopsy". At first it may sound cute but seconds after you hear it, Moopsy will drink your bones.

This large talking plush reproduces the terror perfectly. Cuddle up to Moopsy if you dare and squeeze Moopsy's paw to hear Moopsy speak.

Moopsy  briefly escaped from captivity in Narj's Miraculous Menagerarium the Star Trek: Lower Decks episode "I Have No Bones Yet I Must Flee".

At 14" long, this Moopsy is also bigger than our original plush.

Size: 14 inches (25 cm )

Turn the sound on in the video to hear Moopsy talk.

Note: When this item ships, batteries will not be included, due to rules over importation and regulations

Kirk's Constitution-class U.S.S. Enterprise — die-cast, with a 48-page collector book.

This model shows the U.S.S. Enterprise as it looked in the original Star Trek series, under Captain Kirk. A Constitution-class ship famously charged “to boldly go where no man has gone before.”

Why you'll love it

• The ship that started it all — the definitive Star Trek silhouette.
• The 48-page collector book — the making of the original Star Trek, with original concept art from designer Matt Jefferies and insights from rare production documents. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The Galaxy-class U.S.S. Enterprise-D — die-cast, with a 48-page collector book.

The Galaxy-class U.S.S. Enterprise-D was Starfleet's flagship in the 2360s and early 2370s. Under Captain Picard it made first contact with Q, broke the Borg's first invasion of the Federation, and was destroyed in 2371 after an encounter with the renegades Lursa and B'Etor.

Why you'll love it

• The heart of The Next Generation — one of the most beloved ships in all of Star Trek.
• The 48-page collector book — the making of TNG, from extensive interviews with the show's creators. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The U.S.S. Enterprise NCC-1701-G — a screen-accurate die-cast model with a 48-page collector book.

At the end of Star Trek: Picard, the ship that had served as the U.S.S. Titan-A was renamed in honour of the most famous name in Starfleet — becoming the U.S.S. Enterprise NCC-1701-G. Command passed to Captain Seven of Nine, with Ensign Jack Crusher at the conn.

Why you'll love it

• The legendary name reborn — Seven of Nine's ship, and a new crew for a new era.
• The 48-page collector book — profiles the Enterprise-G and how it carries the Enterprise legacy forward. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The Sovereign-class U.S.S. Enterprise-E — die-cast, with a 48-page collector book.

The Sovereign-class U.S.S. Enterprise-E entered service in 2372 after the loss of the Enterprise-D, again under Captain Picard. It led the fleet that destroyed the Borg cube attacking Earth, exposed the plot against the Ba'ku, and defeated the Romulan Praetor Shinzon.

Why you'll love it

• From First Contact to Nemesis — the Enterprise of the TNG movie era.
• The 48-page collector book — the making of the Next Generation movies. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

Sisko's cloaked U.S.S. Defiant — die-cast, with a 48-page collector book.

The U.S.S. Defiant was Starfleet's first true warship, built to counter the Borg. Shelved as overpowered and unstable, it was revived once Benjamin Sisko grasped the Dominion threat, assigned to Deep Space 9 and — by agreement with the Romulans — fitted with a cloaking device.

Why you'll love it

• Small ship, big punch — the toughest little ship in Starfleet.
• The 48-page collector book — the design of the Defiant and the creation of the Dominion, with in-depth interviews with the Deep Space Nine creators. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

This is a light-up replica of the Master Systems Display (MSD) on the Galaxy-class U.S.S. Enterprise NCC-1701-D — the famous cutaway of the ship that appeared throughout Star Trek: The Next Generation. This upgraded version of the artwork was created by Geoff Mandel, who is a veteran of the Star Trek art department.

The artwork is visible when the power isn’t on, but comes to life when you push the button on the side. It works in a very similar way to the real displays used on the show, with backlit film.

"This is a light-up replica of the Master Systems Display (MSD) for a Constitution-class Starship, like Captain Kirk’s U.S.S. Enterprise NCC-1701. It was created for the Star Trek: Enterprise story ""In A Mirror Darkly,"" when we discovered that the one of the Enterprise’s sister ships, the U.S.S. Defiant from the original series, had been sent to the Mirror Universe. Concept artist Doug Drexler created the artwork as if it were for the original Enterprise. He was inspired by the kind of graphics that were used on the original show and it shows several familiar locations including the bridge, sickbay, the briefing room and main engineering. The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth. The light panel is 31.5"" (80 cm) long and 10.25"" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film."

"Turn your desk into an LCARS console. This extra-large desk mat features artwork from the U.S.S. Enterprise NCC-1701-D, the Galaxy-class flagship Captain Jean-Luc Picard commanded in Star Trek: The Next Generation. It shows a Class 1 sensor probe as a Master Systems Display (MSD), in the LCARS style seen on every console aboard the Enterprise-D. It sits under your keyboard and mouse, and it's hard to resist tapping the panels as if you were on the bridge yourself. LCARS (Library Computer Access and Retrieval System) is the computer interface used across Starfleet ships, starbases and space stations. Its touch panels could be reconfigured in seconds to suit the task at hand, so even complex tasks took just a few button presses. Why you'll love it: Artwork from the U.S.S. Enterprise NCC-1701-D Class 1 sensor probe shown as an MSD, in authentic TNG-era LCARS style Extra large, big enough for your keyboard and mouse Smooth rubber surface for fast, even mouse movement Stitched edges that won't fray or peel Non-slip back, so it stays where you put it Pairs with our Enterprise-D Ops Station and Stargazer Conn Station desk mats PRE-ORDER: Due to ship December 2026 Specifications: Series: Star Trek: The Next Generation Dimensions: 31.25"" x 10"" (approx. 79cm x 25cm) Surface: rubber, printed design Edges: stitched Backing: non-slip Care: wipe clean with a damp cloth, do not machine wash Pre-order: due to ship December 2026 PLEASE NOTE: This is an art piece intended for display. It is not a toy and is not suitable for anyone under the age of 14."

Star Trek: The Next Generation LCARS Thermos Flask Genuine Thermos performance. Iconic LCARS design. A collector's piece you'll actually use every day. Master Replicas x Thermos have beamed up something special: the classic vacuum flask, reimagined in the unmistakable LCARS interface from the U.S.S. Enterprise-D. This isn't fan merch — it's the real Thermos, wrapped in a design Trekkies will lose their minds over. Why you'll love it: • Authentic LCARS design — the iconic Next Generation control-panel layout in lilac, gold and pink, wrapped right around the flask • Hidden easter eggs — spot the secret drinks menu tucked into the panel: Earl Grey, matcha, hot chocolate, mulled wine & more • Genuine Thermos insulation — vacuum-sealed stainless steel keeps drinks piping hot or ice cold for hours • Flip-top lid + easy-pour spout — one-handed pouring, no unscrewing • Integrated cup included — the lid doubles as a proper mug • 16oz / 500ml • dishwasher safe • built for daily use Arrives in a collector's LCARS gift box Not an afterthought — a beautifully designed, display-worthy presentation box themed to match. It makes this the ultimate gift for the Star Trek fan in your life (or, let's be honest, for yourself). Ready to give, ready to keep. Quietly collectible. Made to last. Genuinely useful. You're getting a licensed collector's edition and a premium Thermos flask you'll reach for every single day — plus a gift box that makes it feel like an occasion. That's not a novelty mug that lives in a cupboard. It's the real thing. Preorder now — expected to ship by the end of 2026.

The U.S.S. Titan-A from Star Trek: Picard — a screen-accurate die-cast model with its own 48-page collector book.

The Titan-A carried Jean-Luc Picard and William Riker through the third and final season of Star Trek: Picard, under Captain Liam Shaw and with Commander Seven of Nine at his side, and survived a last confrontation with the Borg. At the end of her mission she was given a new name and registry — becoming the U.S.S. Enterprise NCC-1701-G.

Why you'll love it

• Straight from Picard's final season — the ship at the centre of the story, and the future Enterprise-G.
• The 48-page collector book — profile, annotated plans and the making of Star Trek: Picard, with behind-the-scenes photography and concept art. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

"This is a light-up replica of the Master Systems Display (MSD) of the Odyssey-class U.S.S. Enterprise NCC-1701-F, which was created for Star Trek Online. The artwork is packed with detail showing the location of all the key systems, from the Armory to the Warp Core Ejection Hatch. The artwork is visible when the power isn’t on, but comes to life when you push the button on the side. It works in a very similar way to the real displays used on the show, with backlit film. The light panel is 31.5 inches (80 cm) long and 10.25 inches (26.5 cm) high."

"Think you know all about Star Trek: The Next Generation? This is the chance to prove it. Which crew member grew up in Alaska? Who did Data called “Grandpa”? How many decks are there on the U.S.S. Enterprise NCC-1701-D? This trivia deck is packed with hundreds of questions divided between Characters, Ships & Tech and Missions. Once you know the category, challenge your friends by choosing your level of difficulty: are you an ensign, a commander or a captain? Only the best are good enough for Starfleet. "

Turn your desk into the command deck of a Klingon K’t’inga-class battlecruiser with this extra-large desk mat, designed to sit under your keyboard and mouse. The mat uses authentic Klingon console artwork, which was created by Geoff Mandel for the Star Trek: Voyager episode “Prophecy”. The artwork gives you a chance to examine a screen-used graphic up close and personal, and it’s hard to resist working the controls as if you were commanding the ship yourself.

"The next ship in our Star Trek Briefings series is Captain Pike's U.S.S. Enterprise NCC-1701, as seen in Star Trek: Strange New Worlds. This briefing pack takes you around the Enterprise in detail, with a set of oversized sheets showing isometric drawings of key locations, made using 3D files generated by the Star Trek art department. This pack includes detailed schematics of the Main Bridge (including bridge consoles), Captain's Chair, Turbolift, Sickbay, Captain's Quarters, and Science Lab. Presented in a portfolio, it's a great collector's piece for any Strange New Worlds fan, and is a companion to the U.S.S. Titan-A pack in the same series. Specifications: Contents: 20 oversized sheets Sheet size: 16.5"" x 11.7"" Presentation: supplied in a presentation portfolio Artwork: detailed isometric drawings made from the original 3D files This is a preorder that will ship in March 2027."