The Crossfield-class U.S.S. Discovery and its spore drive — die-cast, with a 48-page collector book.

The U.S.S. Discovery was the testbed for the experimental spore drive and served through the Klingon war. This is the original version from the first two seasons of Star Trek: Discovery, before the ship was sent to the 32nd century.

Why you'll love it

• An unmistakable design — by John Eaves with creators Bryan Fuller and Alex Kurtzman, inspired by legendary designer Ken Adam's work on an unmade 1970s Star Trek film.
• The 48-page collector book — the ship's profile, annotated plans and the story of the design. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

JJ Abrams' sleeker, bolder 2009 Enterprise — die-cast, with a 48-page collector book.

When Star Trek was rebooted for the big screen in 2009, the creators redesigned the Enterprise to look sleeker and sexier than ever — the “hotrod” version, as director JJ Abrams put it. It also appeared in Star Trek Into Darkness before being modified for Star Trek Beyond.

Why you'll love it

• Three films of history — the reboot Enterprise across the Kelvin-timeline trilogy.
• Designed by Ryan Church, famed for his work on the Star Wars films.
• The 48-page collector book — its profile, annotated plans and the story of the design. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The classic Constitution silhouette, reimagined for Strange New Worlds — die-cast, with a 48-page collector book.

This version of the U.S.S. Enterprise debuted at the end of Star Trek: Discovery's first season before taking centre stage in Star Trek: Strange New Worlds under Captain Pike.

Why you'll love it

• A modern reimagining — Matt Jefferies' original blended with the motion-picture Enterprise and subtle nods to the NX-01. Designed by John Eaves, Scott Schneider and William Budge.
• The 48-page collector book — the ship's profile, annotated plans and the story of the design. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

Captain Georgiou's Walker-class U.S.S. Shenzhou — die-cast, with a 48-page collector book.

The Walker-class U.S.S. Shenzhou was commanded by Captain Georgiou and was the first ship to encounter the Klingon T'Kuvma, playing a major role in the Battle at the Binary Stars, where it was critically damaged.

Why you'll love it

• First contact, first shots — the ship that opened Star Trek: Discovery.
• The 48-page collector book — its profile, annotated plans and the design by John Eaves. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The far-future U.S.S. Voyager-J — die-cast, with a 48-page collector book.

The U.S.S. Voyager NCC-74656-J is a 32nd-century descendant of Captain Janeway's famous ship. It follows a similar design but with detached hulls and nacelles and programmable matter, and served as the testbed for the dilithium-free Pathway drive.

Why you'll love it

• A tribute across eras — designed by Ryan Dening to link the different generations of Star Trek.
• The 48-page collector book — features a brand-new, in-depth interview with Discovery showrunner Michelle Paradise. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

“The toughest, fastest, most powerful ship Starfleet has ever put into service.” — Captain Riker

In 2399 the Inquiry-class U.S.S. Zheng He was part of the fleet that defended the androids on Coppelius from the Romulan Zhat Vash. In 2401, Inquiry-class ships confronted the Borg when an anomaly appeared at the edge of Federation space, and joined the Frontier Day celebrations.

Why you'll love it

• A hero ship of Picard — from the Coppelius stand to Frontier Day.
• The 48-page collector book — the making of Star Trek: Picard season one, with all-new interviews with makeup supremo Neville Page and storyboard artist Patrick Barrett, plus rare behind-the-scenes photography and concept art. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

LIMITED EDITION. This extraordinary display case features a complete set of 1:21 figurines of all 17 Doctors in an acrylic TARDIS shelving unit that is designed to be fixed to a wall. A panel on the front (where the doors are) can be removed to reveal the Doctors inside. The display itself is an impressive 81 cm tall by 46 cm across.

The ships in The Expanse rely on an Epstein drive to reach the kinds of speed that make interplanetary travel practical. The drive was first tested on a second-hand yacht, and was discovered almost by accident.

This is one of the last models that Eaglemoss produced and we have them all.

Yacht length: 6 inches (16 cm); width: 4.7 inches (12 cm); height: 4.3 inches (11 cm).

The Razorback started life as Julie Mao's racing ship. Avasarala and Bobbie use it to escape from the Guanshiyin before Bobbie ends up owning it. She uses it to investigate the missing Martian ships, which she discovers have been sold to the Free Navy.

The Eaglemoss model is 7.25 inches (18.5 cm) long.

This incredible sixth scale statue shows the Fifteenth Doctor as he made his full debut in "The Church on Ruby Road". This Doctor has an irrepressible passion for life, and takes great pleasure in the way he dresses.

The statue is in scale with Eaglemoss's mega statues, and is perfect to be displayed alongside the other Doctors including the Fourth and the Tenth. It was sculpted digitally before being cast in a high quality resin and painted by hand.

The statue stands 12.5 inches (32 cm) tall including the base.

To celebrate the 25th anniversary of The Matrix, Master Replicas are releasing an incredibly detailed die-cast model of Morpheus's ship The Nebuchadnezzar.

When The Matrix was released in 1999, the Wachowskis changed cinema forever. Sci-fi had never been cooler. The original movie played with huge ideas as Morpheus and his allies freed Neo from his mundane reality and introduced him to the truth: a world where the machines have subjugated humanity.

The Nebuchadnezzar, which was designed by concept artist Tani Kunitake, was at the heart of the story. The Neb was a rusting hovercraft that used EM pulses to protect itself from the machines, as Morpheus and his crew managed to stay one step ahead of the robotic Sentinels.

This impressive die-cast model has been digitally sculpted before being cast in zinc alloy and ABS, and painted by hand. It has been officially licensed by Warner Bros. and is a true collectors item.

The ship measures 11.8 inches (30 cm) long.

The Sphere, or Cruiser, was the Kaylon's main attack ship. Each Cruiser was equipped with one Interceptor, which served as an auxiliary craft. All spheres were equipped with highly advanced technology, a single central cannon with impressive firepower and a hull that resisted target-locking.

Cruisers are capable of sustained quantum travel at 35 lightyears per hour.

The model is just under 7 inches (17.5 cm) across.

RARE SITE EXCLUSIVE The Kaylon Interceptor from The Orville is the smaller ship with a 'tail' that was carried inside the Kaylon sphere.

The model is just under 7 inches (17.5 cm) long. 

The Union Fighter PT-197, better known as the Pterodon, is a super-sleek one-man fighter, which made its debut at the beginning of the third season of The Orville. It was part of a new fleet of fighters that was introduced in the aftermath of the Kaylon War. It is incredibly maneuverable and, as Gordon will tell you, a hell of a lot of fun to fly.

The model, which measures just under 9 inches (22 cm)nose to tail, is made of die-cast and is based on the original CG model that was created for the show. It has never been available before.

Shipping From December 2024

The XL USS Orville from Seth McFarlane's sci-fi series.

Eaglemoss only released a limited number of ships from the series, and this is the XL version of the hero ship.

The model is approximately 10.25 inches (26 cm) long.

Destroyers were a pivotal part of the Krill military. A destroyer engaged enemy ships in direct combat, and its bombing capabilities made the ship the ideal choice to attack colony planets from space.

Yet destroyers were more than simple attack ships: the Krill designed them to host entire families, providing living arrangements, religious sanctuaries, and classrooms for children.

The model is approximately 8.66 inches (22 cm) long.

The original version of the TARDIS was modified at the end of the show’s third season. The design of the roof was altered so that it was flatter, and new doors were made with a new lock. This version first appeared in “The War Machines” and was used throughout the Second Doctor’s tenure. It was given a refit before “The War Games”.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

The Expanse collection was launched in the last days of Eaglemoss and had only limited distribution. The first model was an XL version of the series' main ship — the Rocinante, a Martian corvette that ended up under the charge of James Holden.

The Eaglemoss model measures 12.8 inches (32.5 cm) long and comes in its original box.

EXCLUSIVE LIMITED EDITION Eaglemoss YELLOW model of the light cycle from the 1982 movie Tron. The model is 8.7 inches (22 cm) long and is available here for the first time.