When Doctor Who returned in 2005, the team built an entirely new TARDIS. This version was bigger than any of its predecessors and, in fact, bigger than an original London police box. The production team actually made four different versions of the prop but there were no significant differences between them.

The model is 1:21 scale to match the Eaglemoss figurines and stands 14.3 cm tall.

This is a pre-order that is due to ship in September.

During the Seventh Doctor’s tenure, there were actually three different versions of the TARDIS, all of which were made of fibreglass. They were all cast from the same moulds, but there were differences to do with the frame around the sign at the top and the position of the lock and handles. These TARDIS props had doors on the front and the back. On one side, the door opened on the left; on the other side, it opened on the right.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

This is a pre-order that is due to ship in September.

LIMITED EDITION • WEBSITE EXCLUSIVE

In ‘The Happiness Patrol’ the Doctor and Ace land on the planet Terra Alpha, where sadness is against the law. In an effort to enforce joy, Helen A’s Happiness Patrol paint the TARDIS pink. After the Doctor helps with the rebellion, normal emotions are restored and the TARDIS is painted blue again.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

This is a pre-order that is due to ship in September.

The original TARDIS prop was modified in “The War Games” and this version was used throughout the Third Doctor’s stories and for the Fourth Doctor's first two seasons. Various repairs were made during this time, most notably, it was given a fresh coat of paint. The original prop was eventually retired in 1976, meaning it had been in service for 13 years.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.9 cm tall.

This is a pre-order that is due to ship in September.

The original version of the TARDIS was modified at the end of the show’s third season. The design of the roof was altered so that it was flatter, and new doors were made with a new lock. This version first appeared in “The War Machines” and was used throughout the Second Doctor’s tenure. It was given a refit before “The War Games”.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

This is a pre-order that is due to ship in September.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Voyager. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop in 1994. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that Voyager was an Intrepid-class starship that was launched from Earth Station McKinley on Stardate 48038.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Voyager.

This is a preorder that will ship in August.

This is a replica of the gate that was found on the Destiny in Stargate Universe. This gate was more primitive than the versions found in the Milky Way Galaxy and had a much shorter range. The glyphs on this gate lit up as they were dialled, and the model shows the address for Earth. The gate had been left unused for thousands of years after the crew left the Destiny, but was revived by the team from Earth, who used it to gather supplies and explore the universe. The replica gate measures 9.25 inches (23.5 cm) across. It is made of polystone and comes with a separate display base that carries the SGU logo. Master Replicas has carefully reproduced every glyph on the gate, which was based on a digital model that was supplied by MGM. This is a preorder that is due to ship in October.

This action figure shows Ensign Brad Boimler when he was a junior officer on the U.S.S. Cerritos in the series Star Trek: Lower Decks.

Boimler has always been one of the most anxious members of the crew and was eager to impress.

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a phaser and PADD. It is part of a new series that features characters from all the modern Star Trek shows.

This is a preorder that will be shipping in the third quarter of 2025.

Special Shipping Rate. USA $7.99 (for one or two figures). UK £3.99.

This action figure shows Captain William Riker in his Starfleet Uniform, armed with a phaser, as he returns to the bridge of theU.S.S. Enterprisen NCC-1701-D in the third season of Star Trek: Picard

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a phaser rifle. It is part of a new series that features characters from all the modern Star Trek shows.

This is a preorder that will be shipping in the fourth quarter of 2025.

Special Shipping Rate. USA $7.99 (for one or two figures). UK £3.99.

One of the most terrifying sounds in the Universe is "Moopsy". At first it may sound cute but seconds after you hear it, Moopsy will drink your bones.

This large talking plush reproduces the terror perfectly. Cuddle up to Moopsy if you dare and squeeze Moopsy's paw to hear Moopsy speak.

Moopsy  briefly escaped from captivity in Narj's Miraculous Menagerarium the Star Trek: Lower Decks episode "I Have No Bones Yet I Must Flee".

At 14" long, this Moopsy is also bigger than our original plush.

Size: 14 inches (25 cm )

Turn the sound on in the video to hear Moopsy talk.

This is a preorder that will ship from August.

Note: When this item ships, batteries will not be included, due to rules over importation and regulations

The Master is part of a new line of Master Replicas high-end One Six Scale Collector Figures,. It is being produced in a strictly limited edition of 500 pieces.

This incredibly detailed figure features a fully-realised likeness of Roger Delgado, who was the first actor to play the Master. It has over 30 points of articulation and interchangeable hands. It is dressed in an authentically styled fabric costume, comes with multiple accessories including a tissue compressor, laser weapon, 26th-century pistol and Kronos Crystal The figure comes with a display base.

The Master was introduced in Doctor Who's seventh season and was devised to as the Moriaty to the Doctor's Sherlock Holmes. Like the Doctor, he was a Time Lord but his thirst for power caused him to cross swords with the Doctor and UNIT on several occasions. Suave, yet sinister and with a deep hypnotic stare, the Master was one of the most dangerous men in the Universe. 

This is a preorder that will ship at end of the year. This is a strictly limited edition of 500 pieces.  

The Second Doctor is the first in a new line of Master Replicas high-end One Six Scale Collector Figures,. It is being produced in a strictly limited edition of 500 pieces.

This incredibly detailed figure features a fully-realised likeness of Patrick Troughton, has over 30 points of articulation and interchangeable hands. It is dressed in an authentically styled fabric costume, comes with multiple accessories including a 500-year diary, recorder, and sonic screwdriver. The figure comes with a display base.

The Second Doctor, played by Patrick Troughton, was a revolutionary figure in Doctor Who's history. He was more playful than his predecessor but his whimsical air hid darker characteristics and a sharp mind. This regeneration saw adventures on besieged Moonbases as he faced emotionless Cybermen, encounters with Martian Ice Warriors, Space Pirates, and a final confrontation with the Time Lords.

This is a preorder that will ship at end of the year. This is a strictly limited edition of 500 pieces.

This is a full-sized, polyresin replica (15 inches wide) of the dedication plaque for the original series Enterprise. It was on the bridge of the ship just to the right of the turbolift doors.

The plaque was carefully researched by Star Trek scenic artist Mike Okuda who supplied us with detailed drawings that we used to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time an officially licensed full-size version has ever been available.

You may be surprised to see that it identifies the Enterprise as a Starship-class ship. The term Constitution class was used by fans but only became canon in the first season of TNG when it appeared on a computer readout in "The Naked Now".

This is a preorder that will ship in July.

Note: This item is a pre order that will ship in Q3

In the original series the crew regularly drank coffee from grey cups. In one of the most famous incidents, Kirk discovers that tribbles have got into his dinner, eaten his chicken sandwich and drunk his coffee.

The cups were originally made of styrofoam, whereas ours are made of earthenware. We've also added a detail that you might have missed. When the cups first appeared in 'Where No Man Has Gone Before', they featured an Enterprise logo with a wreath, but it never appeared on them again. With a little help, we sourced that logo from Gene Roddenberry's files at UCLA and have included it on our cup. The tribble is removable, so your coffee should be safe.

Shipping: USA $8.99. UK £3.99.

The U.S.S. Cerritos is a California-class starship that is tasked with making second contact, offering engineering support and making supply runs. It's the star of Star Trek: Lower Decks, and is where Mariner and Boimler served their time as ensigns.

The Cerritos was designed by Eric Nyquist, who worked with Lower Decks' creator Mike McMahan. The design was finalized by Joseph Martinez and Bobby Walker.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

This is a preorder that will be shipping in Q3 2025.

Special Shipping Rate. USA $8.99 (for up to three models). UK £3.99.

When the big screen version of Star Trek was rebooted in 2009, the creators redesigned the Enterprise to look sleeker and sexier than ever. As director JJ Abrams said, this was the "hotrod" version of the ship. This version also appeared in Star Trek: Into Darkness before it was modified for Star Trek Beyond.

This Enterprise was designed by Ryan Church, who is famous for his work on the Star Wars movies.

The model is part of Master Replicas new range of 4 to 5-inch long  die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

This is a preorder that will be shipping in Q3 2025.

Special Shipping Rate. USA $8.99 (for up to three models). UK £3.99.

This version of the U.S.S. Enterprise made its debut at the end of Star Trek: Discovery's first season before going on to star in Star Trek: Strange New Worlds where it is commanded by Captain Pike.

The ship is a reimagining of Matt Jefferies' original design combined with elements of the motion picture version of the Enterprise and some subtle nods to the NX-01. It was designed by John Eaves, Scott Schneider and William Budge.

The model is part of Master Replicas new range of 4 to 5-inch long models, and is accompanied by a 48-page book, which slides into the base to make a display.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

This is a preorder that will be shipping in Q3 2025.

Special Shipping Rate. USA $8.99 (for up to three models). UK £3.99.

This action figure shows Ensign Beckett Mariner when she was a junior officer on the U.S.S. Cerritos in the series Star Trek: Lower Decks.

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a phaser and PADD. It is part of a new series that features characters from all the modern Star Trek shows.

This is a preorder that will be shipping in the third quarter of 2025.

Special Shipping Rate. USA $7.99 (for one or two figures). UK £3.99.