This action figure shows Ensign Brad Boimler when he was a junior officer on the U.S.S. Cerritos in the series Star Trek: Lower Decks.

Boimler has always been one of the most anxious members of the crew and was eager to impress.

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a phaser and PADD. It is part of a new series that features characters from all the modern Star Trek shows.

This is a pre-order that will ship in August 2026

The far-future U.S.S. Voyager-J — die-cast, with a 48-page collector book.

The U.S.S. Voyager NCC-74656-J is a 32nd-century descendant of Captain Janeway's famous ship. It follows a similar design but with detached hulls and nacelles and programmable matter, and served as the testbed for the dilithium-free Pathway drive.

Why you'll love it

• A tribute across eras — designed by Ryan Dening to link the different generations of Star Trek.
• The 48-page collector book — features a brand-new, in-depth interview with Discovery showrunner Michelle Paradise. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The Osiris dates from the first Cylon War and was part of the fleet that featured in Blood & Chrome. It was a stealth frigate, or pocket battleship. The original VFX model was designed by concept artist Richard Livingston.

The Eaglemoss model is just over 10.5 inches (27 cm) long.

Master Replicas, Insight Editions and Legendary Entertainment are proud to present the Harkonnen Ornithopter, a highly-detailed die-cast model of the iconic vehicle that menaced the skies of Arrakis in the Dune motion picture franchise produced by Legendary.

Shown in flight mode, with the landing gear up and the weapons deployed, the model boasts an impressive wingspan of just under two feet and measures 10.5 inches from nose to stern. It ships fully-assembled and painted, making for an exceptional display piece.

The Ornithopters make frequent appearances in Frank Herbert’s original Dune novels. The film’s art department developed different versions for House of Atreides and House of Harkonnen, with the Harkonnen versions being heavily armed. The result: a spectacular design that swoops over the Arrakean desert raining terror on the Fremen and anything in the Harkonnens’ path.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Defiant. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that the Defiant was the first starship in its class and was launched from the Antares ship yards on Stardate 47538.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Deep Space Nine.

This is a preorder that will ship in the fall of 2025.

Kirk's Constitution-class U.S.S. Enterprise — die-cast, with a 48-page collector book.

This model shows the U.S.S. Enterprise as it looked in the original Star Trek series, under Captain Kirk. A Constitution-class ship famously charged “to boldly go where no man has gone before.”

Why you'll love it

• The ship that started it all — the definitive Star Trek silhouette.
• The 48-page collector book — the making of the original Star Trek, with original concept art from designer Matt Jefferies and insights from rare production documents. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

This action figure shows Worf in his Starfleet uniform, armed with a kur'leth, as he comes to Admiral Picard's aid in the third season of Star Trek: Picard

The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

This is a pre-order that will ship in July 2026

The Galaxy-class U.S.S. Enterprise-D — die-cast, with a 48-page collector book.

The Galaxy-class U.S.S. Enterprise-D was Starfleet's flagship in the 2360s and early 2370s. Under Captain Picard it made first contact with Q, broke the Borg's first invasion of the Federation, and was destroyed in 2371 after an encounter with the renegades Lursa and B'Etor.

Why you'll love it

• The heart of The Next Generation — one of the most beloved ships in all of Star Trek.
• The 48-page collector book — the making of TNG, from extensive interviews with the show's creators. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

"The Laboratory Eagle appeared in the Space 1999 story “The Metamorph”, which opened the second season and introduced Maya. When two Alphan pilots were captured by Mentor, Commander Koenig took Eagle 4 to retrieve them. He ordered it to be fitted with a laboratory pod and with additional booster engines that were mounted on the top and were designed to increase its power and speed. These stunning models are based on the acclaimed Sixteen 12 tooling. This model of the laboratory Eagle Transporter is 5.5 inches (13 cm) long and has a detachable pod. It is a similar size to Master Replicas’ Starship Library series."

The bridge of every Starship has a dedication plaque that records where it was built and when it entered service, and lists its class, registry and motto.

Eaglemoss produced a series of plaque replicas, designed to be hung on a wall or displayed on a shelf.

This plaque replicates that of the Crossfield-class U.S.S. Discovery and features the motto "All things can be understood once they are discovered; the point is to discover them."

The plaque measures approximately 9 inches (22 cm) across.

"The Rescue Eagle appeared in several episodes of Space 1999, and played a particular big role in “Earthbound”, which was the fifth episode to be filmed. The rescue pod was painted with distinctive red stripes, suggesting that it was similar to an ambulance. These stunning models are based on the acclaimed Sixteen 12 tooling. This model of the Rescue Eagle Transporter is 5.5 inches (13 cm) long and has a detachable pod. It is a similar size to Master Replicas’ Starship Library series. "

The modern Viper is a careful update of artist Ralph McQuarrie's original design that was created for the 2004 reboot of Battlestar Galactica. Writer and producer Ron D. Moore wanted to make the show about life on an spaceborne aircraft carrier and the Vipers and their pilots were central to his plans. No Viper pilot was more compelling than Starbuck, who had all the skills (and flaws) to make her a great pilot; this version of the model has her call sign on the hull. The model is 10.6 inches (27 cm) long.

This version of the Raider was seen in the TV movies Blood & Chrome and Razor. It was the design that was used in the First Cylon War and was an updated version of Ralph McQuarrie's mechanical original, which the production team redesigned to look more advanced.

The model has a wingspan of 7.5 inches (19 cm).

In the original Battlestar Galactica Muffit was a robotic recreation of Boxey's pet daggit, which was killed during the Cylon attack. Despite being a robot, Muffit had a real personality, occasionally getting into trouble and saving the day.

This is one of the very few BSG statues that Eaglemoss produced. It stands just over 4.25 inches (11 cm) tall.

"The Alkesh was a mid-sized vessel that the Goa’uld used as a troop transport and as a bomber. It was capable of traveling faster than light and could enter a planet’s atmosphere, where it was often used to mount “bombing” raids using plasma charges. When it was used as a troop transport, the Jaffa were deployed using transportation rings. The model is based on the original CG asset used on the show and is 7.25” (18.5 cm) long. "

The Sovereign-class U.S.S. Enterprise-E — die-cast, with a 48-page collector book.

The Sovereign-class U.S.S. Enterprise-E entered service in 2372 after the loss of the Enterprise-D, again under Captain Picard. It led the fleet that destroyed the Borg cube attacking Earth, exposed the plot against the Ba'ku, and defeated the Romulan Praetor Shinzon.

Why you'll love it

• From First Contact to Nemesis — the Enterprise of the TNG movie era.
• The 48-page collector book — the making of the Next Generation movies. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

Turn your desk into the bridge of a starship with this extra large desk mat, designed to sit under your keyboard and mouse. The mat uses artwork created for the Conn station on the U.S.S. Stargazer in Season 2 of Star Trek: Picard, and it's almost impossible to resist tapping it as if you were pressing the buttons.

The mat measures 31.25" by 11.5". It has a rubber surface with stitched edges and a non-slip back.

Captain Janeway's U.S.S. Voyager — die-cast, with a 48-page collector book.

One of the most famous ships in Starfleet history. In 2371 the U.S.S. Voyager was flung 70,000 light years across the galaxy by the Caretaker. A journey that should have taken 70 years, Janeway's crew made in seven.

Why you'll love it

• The long way home — new species, and the Borg, every step of the way.
• The 48-page collector book — the making of Star Trek: Voyager, from extensive interviews with the show's creators. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

"This is a light-up replica of the Master Systems Display (MSD) for a Constitution-class Starship, like Captain Kirk’s U.S.S. Enterprise NCC-1701. It was created for the Star Trek: Enterprise story ""In A Mirror Darkly,"" when we discovered that the one of the Enterprise’s sister ships, the U.S.S. Defiant from the original series, had been sent to the Mirror Universe. Concept artist Doug Drexler created the artwork as if it were for the original Enterprise. He was inspired by the kind of graphics that were used on the original show and it shows several familiar locations including the bridge, sickbay, the briefing room and main engineering. The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth. The light panel is 31.5"" (80 cm) long and 10.25"" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film."

Sisko's cloaked U.S.S. Defiant — die-cast, with a 48-page collector book.

The U.S.S. Defiant was Starfleet's first true warship, built to counter the Borg. Shelved as overpowered and unstable, it was revived once Benjamin Sisko grasped the Dominion threat, assigned to Deep Space 9 and — by agreement with the Romulans — fitted with a cloaking device.

Why you'll love it

• Small ship, big punch — the toughest little ship in Starfleet.
• The 48-page collector book — the design of the Defiant and the creation of the Dominion, with in-depth interviews with the Deep Space Nine creators. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.