This action figure shows Lt. Spock as portrayed by Ethan Peck in Strange New Worlds. He carries a phaser and tricorder. The figure is 4.5 inches (11.4 cm) tall. and is part of a new series that features characters from all the modern Star Trek shows.

The U.S.S. Voyager NCC-74656-J was a 32nd-century descendant of Captain Janeway's famous ship. It followed a similar design, but had detached hulls and warp nacelles and used programmable matter. It also acted as the tested for the Pathway drive, which worked without dilithium.

The ship was designed by Ryan Dening. The producers wanted it to be a tribute to Janeway's ship and to show the links between different eras of Star Trek.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which features a brand-new, in-depth interview with ,em>Discovery showrunner Michelle Paradise.

This action figure shows Ensign Brad Boimler when he was a junior officer on the U.S.S. Cerritos in the series Star Trek: Lower Decks.

Boimler has always been one of the most anxious members of the crew and was eager to impress.

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a phaser and PADD. It is part of a new series that features characters from all the modern Star Trek shows.

This is a pre-order that will ship in September 2026

The D7 battle cruiser is one of the most important ships in the Klingon fleet. This is the original version of the class, which was commissioned by High Chancellor L'Rell to unite the Klingon Houses.

The ship was designed by Ryan Dening, who was careful to pay tribute to Matt Jefferies' original and the redesigned version that was made for Star Trek: The Motion Picture. Dening's version has appeared on both Star Trek: Discovery and Star Trek: Strange New Worlds.

The model is part of Master Replicas new range of 4 to 5-inch long, die-cast models, and is accompanied by a 48-page book, that features in-depth articles based on new interviews with writers Bryan Fuller and Kirsten Beyer, and original production artwork.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Defiant. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that the Defiant was the first starship in its class and was launched from the Antares ship yards on Stardate 47538.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Deep Space Nine.

This is a preorder that will ship in the fall of 2025.

This action figure shows Worf in his Starfleet uniform, armed with a kur'leth, as he comes to Admiral Picard's aid in the third season of Star Trek: Picard

The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

This is a pre-order that will ship in July 2026

Turn your desk into the bridge of a Constitution-class starship with this extra large desk mat, which is designed to sit under your keyboard and mouse. The artwork is taken directly from displays on the bridge of Captain Kirk's Enterprise as seen in the original series.

The mat measures 31.25" by 10". It has a rubber surface with stitched edges and a non-slip back.

This is a light-up replica of the Master Systems Display from the bridge of the U.S.S. Voyager. It features the same graphic that was used on the TV series, which was created by Mike Okuda’s scenic art department. It shows all the ship’s key systems including the shuttlebay, warp cores, turbolift network, and main deflector. The panels are designed to be hung on a wall or displayed on a shelf. They are powered by a USB C cable and light up at the press of a button just like the displays on a starship. They work in a very similar way to the real displays used on the show with backlit film. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth. The light up panel measures an impressive 31.5” (60 cm) across and is 10.25” (26 cm) high. This is a preorder that will ship in Summer 2026.

This model shows the U.S.S. Enterprise as it looked during the original Star Trek TV series, when it was under the command of Captain Kirk. The Enterprise was a Constitution-class ship that was famously given the mission “to boldly go where no man has gone before.” It also supported Federation colonies and patrolled the Federation’s borders. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book that includes a profile of the ship with annotated plan views and in-depth information about the production of the original Star Trek, featuring original concept art from the Enterprise’s designer Matt Jefferies and insights from rare production documents that reveal how the show developed.  This is a pre-order that will ship in September 2026 – Star Trek’s 60th anniversary. 

The Galaxy-class U.S.S. Enterprise NCC-1701-D was Starfleet’s flagship in the 2360s and early 2370s. Under the command of Captain Jean-Luc Picard it was the first Starfleet ship to make contact with Q. Its crew defeated the Borg during their first attempt to invade the Federation and prevented the Romulans from interfering with the Klingon civil war. It was destroyed in 2371 after an encounter with the Klingon renegades Lursa and B’Etor. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book that includes a profile of the ship with annotated plan views and in-depth information about the production of Star Trek: The Next Generation based on extensive interviews with the show’s creators.  The book features rare behind-the-scenes photography and production art.

Turn your desk into the bridge of a starship with this extra large desk mat, designed to sit under your keyboard and mouse. The mat uses artwork created for the Conn station on the U.S.S. Stargazer in Season 2 of Star Trek: Picard, and it's almost impossible to resist tapping it as if you were pressing the buttons.

The mat measures 31.25" by 11.5". It has a rubber surface with stitched edges and a non-slip back.

This action figure shows Captain William Riker in his Starfleet Uniform, armed with a phaser, as he returns to the bridge of theU.S.S. Enterprisen NCC-1701-D in the third season of Star Trek: Picard

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a phaser rifle. It is part of a new series that features characters from all the modern Star Trek shows.

This is a pre-order that will ship in September 2026

This is an official licensed replica of the wide-bottomed Raktajino mugs that were used on Star Trek: Deep Space Nine. This version of the mug carries the show’s logo. In reality, the mugs were produced by a company called Feltman Langer who were based in Los Angeles, California.

The design was known as a “No Spill No Slide” mug and they were originally sold to surf shops up and down the coast before the makers started promoting their use on boats. The Deep Space Nine art department used different mugs for different parts of the station and style of mug only appeared on the Promenade.

The U.S.S. Discovery is a Crossfield-class starship that was used as the testbed for the spore drive, and was active during the Klingon war.

This is the original version, which featured in the first two seasons of Star Trek: Discovery, before the ship was sent to the 32nd century.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

The U.S.S. Shenzhou is a Walker-class starship that was commanded by Captain Georgiou. It was the first ship to encounter the Klingon T'Kuvma and played a major role in the Battle at the Binary Stars, where it was critically damaged.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

The U.S.S. Voyager is one of the most famous ships in Starfleet history. In 2371, it was transported 70,000 light years across the Galaxy by a being known as The Caretaker. Using conventional methods, the journey home from the Delta Quadrant should have taken at least 70 years, but under the command of Captain Janeway, Voyager managed it in seven. Along the way it discovered many new species and survived several encounters with the Borg.  The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book that includes a profile of the ship with annotated plan views and in-depth information about the production of Star Trek: Voyager based on extensive interviews with the show’s creators.  The book features rare behind-the-scenes photography and production art. This is a pre-order that will ship in September 2026 – Star Trek’s 60th anniversary.

The Sovereign-class U.S.S. Enterprise NCC-1701-E entered service in 2372, following the destruction of the U.S.S. Enterprise NCC-1701-D. Like its predecessor, it was commanded by Captain Jean-Luc Picard.  In 2373, it led the fleet that destroyed the Borg cube that attacked Earth. In 2375, it exposed a conspiracy to exploit the Ba’ku people. Then in 2379, it defeated the Romulan Preator Shinzon, when he mounted an attack on Earth and the Federation using a deadly thallaron weapon. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book that includes a profile of the ship with annotated plan views and in-depth information about the production of the Star Trek: The Next Generation movies based on extensive interviews with the show’s creators.  The book features rare behind-the-scenes photography and production art.

LIMITED EDITION • ONLY 500 PIECES The U.S.S. Rubidoux was a California-class starship that was commanded by Captain Dayton. In 2380 it encountered an entity that fed on its power systems until it had absorbed the entire ship. Dayton and her crew were rescued by a team from the U.S.S. Cerritos, who beamed them away before the entity merged with the Rubidoux. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book. It is one of several limited-edition California-class ships that Master Replicas are producing. Its red markings show that it belongs to the command division. All the California-class variants come with an in-depth book that includes a profile of the U.S.S. Cerritos, with annotated plan views and information about the creation of Star Trek: Lower Decks, based on an exclusive interview with the show’s creator Mike McMahan. The Rubidoux is being produced in a limited edition of 500 pieces. This is a preorder that will ship in July 2026.

La Sirena is a Kaplan F17 speed freighter that was operated by Cristóbal Rios, before it was handed on to Raffi Musiker. It was the ship that took Picard to the Borg artifact, where he rescued Soji Asha.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

"The U.S.S. Defiant NCC-74205 was Starfleet’s first true warship. It was originally developed to counter the threat from the Borg, but it was considered to be overpowered and unstable, so the project was abandoned. It was revived after Benjamin Sisko made first contact with the Dominion and realized how dangerous they were. The Defiant was assigned to Deep Space 9 and, thanks to an agreement with the Romulans, it was fitted with a cloaking device. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book that includes a profile of the ship with annotated plan views and in-depth information about the design of the Defiant and the creation of the Dominion. The book features in-depth interviews with Star Trek: Deep Space Nine’s creators and rare behind-the-scenes photography and production art."