This is a full-sized, polyresin replica (15 inches wide) of the dedication plaque for the original series Enterprise. It was on the bridge of the ship just to the right of the turbolift doors.

The plaque was carefully researched by Star Trek scenic artist Mike Okuda who supplied us with detailed drawings that we used to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time an officially licensed full-size version has ever been available.

You may be surprised to see that it identifies the Enterprise as a Starship-class ship. The term Constitution class was used by fans but only became canon in the first season of TNG when it appeared on a computer readout in "The Naked Now".

The U.S.S. Franklin's dedication plaque could be seen on the bridge of the historic ship. The Eaglemoss replica, for wall or shelf display, reveals that the prop used in the movie describes the ship as 'Starship class' and had the motto 'To Boldly Go Where No Man Has Gone Before'.

The Eaglemoss replica is just under 9 inches (22.5 cm) across.

TCG have launched a range of Star Trek characters as part of their FleXfigs range.

These classic bendable toys from the 90s — that can be can be pulled and stretched into different poses — are making a comeback! They're starting off with four of Starfleet's greatest captains: James T. Kirk, Christopher Pike, Jean-Luc Picard, and Benjamin Sisko. We've managed to secure some of the box sets with all four captains.

The figures measure 4.5 inches (12 cm) tall.

One of the most terrifying sounds in the Universe is "Moopsy". At first it may sound cute but seconds after you hear it, Moopsy will drink your bones.

This large talking plush reproduces the terror perfectly. Cuddle up to Moopsy if you dare and squeeze Moopsy's paw to hear Moopsy speak.

Moopsy  briefly escaped from captivity in Narj's Miraculous Menagerarium the Star Trek: Lower Decks episode "I Have No Bones Yet I Must Flee".

At 14" long, this Moopsy is also bigger than our original plush.

Size: 14 inches (25 cm )

Turn the sound on in the video to hear Moopsy talk.

Note: When this item ships, batteries will not be included, due to rules over importation and regulations

This action figure shows Captain William Riker in his Starfleet Uniform, armed with a phaser, as he returns to the bridge of theU.S.S. Enterprisen NCC-1701-D in the third season of Star Trek: Picard

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a phaser rifle. It is part of a new series that features characters from all the modern Star Trek shows.

This is a pre-order that will ship in August 2026

This action figure shows Ensign Brad Boimler when he was a junior officer on the U.S.S. Cerritos in the series Star Trek: Lower Decks.

Boimler has always been one of the most anxious members of the crew and was eager to impress.

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a phaser and PADD. It is part of a new series that features characters from all the modern Star Trek shows.

This is a pre-order that will ship in August 2026

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Voyager. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop in 1994. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that Voyager was an Intrepid-class starship that was launched from Earth Station McKinley on Stardate 48038.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Voyager.

Limited Edition Convention exclusive

Ten inch (25.4 cm) plush of the logical part of the homicidal hologram Badgey from Star Trek: Lower Decks. Logic-y was a hologram created when the virtual tutor program Badgey had a major malfunction and removed all logic from his code. Logic-y’s attempts to reintegrate with Badgey and stop the rogue program’s mission of destructive revenge resulted in his deletion.

This is a light-up replica of the Master Systems Display (MSD) on the U.S.S. Defiant. The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth.

The light panel is 31.5" (80 cm) long and 10.25" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film.

This is an official licensed replica of the wide-bottomed Raktajino mugs that were used on Star Trek: Deep Space Nine. This version carries the logo for Quark’s Bar, something that never actually appeared on screen, where all the mugs like this were produced by the repliactors. In reality, the mugs were produced by a company called Feltman Langer who were based in Los Angeles, California.

The design was known as a “No Spill No Slide” mug and they were originally sold to surf shops up and down the coast before the makers started promoting their use on boats. The Deep Space Nine art department chose the design because they thought it looked suitably alien.

This is an official licensed replica of the wide-bottomed Raktajino mugs that were used on Star Trek: Deep Space Nine. This version of the mug carries the show’s logo. In reality, the mugs were produced by a company called Feltman Langer who were based in Los Angeles, California.

The design was known as a “No Spill No Slide” mug and they were originally sold to surf shops up and down the coast before the makers started promoting their use on boats. The Deep Space Nine art department used different mugs for different parts of the station and style of mug only appeared on the Promenade.

This is an official licensed replica of the wide-bottomed Raktajino mugs that were used on Star Trek: Deep Space Nine. The mugs were produced by the replicators in the station’s replimat and only came in this distinctive blue colour. In reality, the mugs were produced by a company called Feltman Langer who were based in Los Angeles, California.

The design was known as a “No Spill No Slide” mug and they were originally sold to surf shops up and down the coast before the makers started promoting their use on boats. The Deep Space Nine art department used different mugs for different parts of the station and these were only meant for use on the Promenade.

The Crossfield-class U.S.S. Discovery and its spore drive — die-cast, with a 48-page collector book.

The U.S.S. Discovery was the testbed for the experimental spore drive and served through the Klingon war. This is the original version from the first two seasons of Star Trek: Discovery, before the ship was sent to the 32nd century.

Why you'll love it

• An unmistakable design — by John Eaves with creators Bryan Fuller and Alex Kurtzman, inspired by legendary designer Ken Adam's work on an unmade 1970s Star Trek film.
• The 48-page collector book — the ship's profile, annotated plans and the story of the design. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

Captain Georgiou's Walker-class U.S.S. Shenzhou — die-cast, with a 48-page collector book.

The Walker-class U.S.S. Shenzhou was commanded by Captain Georgiou and was the first ship to encounter the Klingon T'Kuvma, playing a major role in the Battle at the Binary Stars, where it was critically damaged.

Why you'll love it

• First contact, first shots — the ship that opened Star Trek: Discovery.
• The 48-page collector book — its profile, annotated plans and the design by John Eaves. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

Rios's Kaplan F17 freighter from Star Trek: Picard — die-cast, with a 48-page collector book.

La Sirena is a Kaplan F17 speed freighter operated by Cristobal Rios before it passed to Raffi Musiker. It carried Picard to the Borg artifact, where he rescued Soji Asha.

Why you'll love it

• Across all three seasons — one of the signature ships of Star Trek: Picard.
• The 48-page collector book — its profile, annotated plans and the design by Mark Yang. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Defiant. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that the Defiant was the first starship in its class and was launched from the Antares ship yards on Stardate 47538.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Deep Space Nine.

This is a preorder that will ship in the fall of 2025.

Star Trek: The Next Generation LCARS Thermos Flask Genuine Thermos performance. Iconic LCARS design. A collector's piece you'll actually use every day. Master Replicas x Thermos have beamed up something special: the classic vacuum flask, reimagined in the unmistakable LCARS interface from the U.S.S. Enterprise-D. This isn't fan merch — it's the real Thermos, wrapped in a design Trekkies will lose their minds over. Why you'll love it: • Authentic LCARS design — the iconic Next Generation control-panel layout in lilac, gold and pink, wrapped right around the flask • Hidden easter eggs — spot the secret drinks menu tucked into the panel: Earl Grey, matcha, hot chocolate, mulled wine & more • Genuine Thermos insulation — vacuum-sealed stainless steel keeps drinks piping hot or ice cold for hours • Flip-top lid + easy-pour spout — one-handed pouring, no unscrewing • Integrated cup included — the lid doubles as a proper mug • 16oz / 500ml • dishwasher safe • built for daily use Arrives in a collector's LCARS gift box Not an afterthought — a beautifully designed, display-worthy presentation box themed to match. It makes this the ultimate gift for the Star Trek fan in your life (or, let's be honest, for yourself). Ready to give, ready to keep. Quietly collectible. Made to last. Genuinely useful. You're getting a licensed collector's edition and a premium Thermos flask you'll reach for every single day — plus a gift box that makes it feel like an occasion. That's not a novelty mug that lives in a cupboard. It's the real thing. Preorder now — expected to ship by the end of 2026.

This is a full-sized, polyresin replica of the dedication plaque for the U.S.S. Enterprise NCC-1701-A. It was the first time a dedication plaque had said that the Enterprise was a Constitution-class ship.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque.

The plaque confirms that the Enterprise was was launched from Earth's San Francisco Fleet Yards.