This is the first in a new line of models from Space 1999. The Eagle Transporter made its debut in the show’s first episode “Breakaway”, when the moon leaves Earth’s orbit. It is one of the most iconic science fiction vehicles ever made. It was designed by Brian Johnson, who was inspired by his own work for the movie “2001 A Space Odyssey”. The idea was to make it modular, so the central pods could be changed for different missions, and there were several different versions. The Transporter was the standard version. These stunning models are based on the acclaimed Sixteen 12 tooling. This model of the classic Eagle Transporter is 5.5 inches (13 cm) long and has a detachable pod. It is a similar size to Master Replicas’ Starship Library series.

This is a light-up replica of the Master Systems Display (MSD) on the Sovereign-class U.S.S. Enterprise NCC-1701-E. . The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth.

The light panel is 31.5" (80 cm) long and 10.25" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Voyager. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop in 1994. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that Voyager was an Intrepid-class starship that was launched from Earth Station McKinley on Stardate 48038.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Voyager.

This action figure shows Admiral Jean-Luc Picard in his civilian clothes, armed with a phaser, as he visits the U.S.S. Titan NCC-80102-A in the third season of Star Trek: Picard

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a PaDD. It is part of a new series that features characters from all the modern Star Trek shows.

This is a pre-order that will ship in June 2026

Challenge your friends to a race through seven years of Star Trek: The Next Generation with this brand new board game. Players draw cards that send them on missions from famous episodes of TNG. Then race around the board trying to complete them first. Along the way you'll face hazards from an intron virus that de-evolves the crew, to a visit from Q.

The game is designed for up to eight players but only the best Starfleet officer will win!

This is a full-sized, polyresin replica (15 inches wide) of the dedication plaque for the original series Enterprise. It was on the bridge of the ship just to the right of the turbolift doors.

The plaque was carefully researched by Star Trek scenic artist Mike Okuda who supplied us with detailed drawings that we used to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time an officially licensed full-size version has ever been available.

You may be surprised to see that it identifies the Enterprise as a Starship-class ship. The term Constitution class was used by fans but only became canon in the first season of TNG when it appeared on a computer readout in "The Naked Now".

Master Replicas is proud to announce the launch of a brand-new line of officially licensed Foundation model ships based on the hit Skydance Television series.

Leading the launch of this incredible new collectible line is the Imperial Jump Ship, a faster-than-light vessel used by the Empire to dominate space travel. This intricately detailed, 10.75-inch die-cast model is crafted using the original CG mesh used by the Foundation VFX team during the making of the series, ensuring an incredible degree of accuracy.

This is Master Replicas first ever Doctor Who ship: the Dalek saucer from 2005's 'The Parting of the Ways'. This impressive polyresin model is 21 cm across and was sculpted by Dalek expert Gavin Rymill. The Daleks used saucers with a similar design in the TV Century 21 Dalek comic strip, but in the 1960s TV budgets didn't stretch to expensive spaceship models. The classic Dalek ship only made its debut in 2005 when a massive fleet of Dalek ships prepared to invade Earth. The ship was made as a 3D CG model by the Mill. Master Replicas recruited Dalek expert Gavin Rymill to recreate the ships using renders made at the time and careful study of the episodes. 

This action figure shows Lt. Spock as portrayed by Ethan Peck in Strange New Worlds. He carries a phaser and tricorder. The figure is 4.5 inches (11.4 cm) tall. and is part of a new series that features characters from all the modern Star Trek shows.

This is a pre-order that will ship in June 2026

The U.S.S. Voyager NCC-74656-J was a 32nd-century descendant of Captain Janeway's famous ship. It followed a similar design, but had detached hulls and warp nacelles and used programmable matter. It also acted as the tested for the Pathway drive, which worked without dilithium.

The ship was designed by Ryan Dening. The producers wanted it to be a tribute to Janeway's ship and to show the links between different eras of Star Trek.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which features a brand-new, in-depth interview with ,em>Discovery showrunner Michelle Paradise.

The D7 battle cruiser is one of the most important ships in the Klingon fleet. This is the original version of the class, which was commissioned by High Chancellor L'Rell to unite the Klingon Houses.

The ship was designed by Ryan Dening, who was careful to pay tribute to Matt Jefferies' original and the redesigned version that was made for Star Trek: The Motion Picture. Dening's version has appeared on both Star Trek: Discovery and Star Trek: Strange New Worlds.

The model is part of Master Replicas new range of 4 to 5-inch long, die-cast models, and is accompanied by a 48-page book, that features in-depth articles based on new interviews with writers Bryan Fuller and Kirsten Beyer, and original production artwork.

Master Replicas, Insight Editions and Legendary Entertainment are proud to present the Harkonnen Ornithopter, a highly-detailed die-cast model of the iconic vehicle that menaced the skies of Arrakis in the Dune motion picture franchise produced by Legendary.

Shown in flight mode, with the landing gear up and the weapons deployed, the model boasts an impressive wingspan of just under two feet and measures 10.5 inches from nose to stern. It ships fully-assembled and painted, making for an exceptional display piece.

The Ornithopters make frequent appearances in Frank Herbert’s original Dune novels. The film’s art department developed different versions for House of Atreides and House of Harkonnen, with the Harkonnen versions being heavily armed. The result: a spectacular design that swoops over the Arrakean desert raining terror on the Fremen and anything in the Harkonnens’ path.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Defiant. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that the Defiant was the first starship in its class and was launched from the Antares ship yards on Stardate 47538.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Deep Space Nine.

This is a preorder that will ship in the fall of 2025.

Turn your desk into the bridge of a Constitution-class starship with this extra large desk mat, which is designed to sit under your keyboard and mouse. The artwork is taken directly from displays on the bridge of Captain Kirk's Enterprise as seen in the original series.

The mat measures 31.25" by 10". It has a rubber surface with stitched edges and a non-slip back.

This is a light-up replica of the Master Systems Display from the bridge of the U.S.S. Voyager. It features the same graphic that was used on the TV series, which was created by Mike Okuda’s scenic art department. It shows all the ship’s key systems including the shuttlebay, warp cores, turbolift network, and main deflector. The panels are designed to be hung on a wall or displayed on a shelf. They are powered by a USB C cable and light up at the press of a button just like the displays on a starship. They work in a very similar way to the real displays used on the show with backlit film. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth. The light up panel measures an impressive 31.5” (60 cm) across and is 10.25” (26 cm) high. This is a preorder that will ship in Summer 2026.

The modern Viper is a careful update of artist Ralph McQuarrie's original design that was created for the 2004 reboot of Battlestar Galactica. Writer and producer Ron D. Moore wanted to make the show about life on an spaceborne aircraft carrier and the Vipers and their pilots were central to his plans. No Viper pilot was more compelling than Starbuck, who had all the skills (and flaws) to make her a great pilot; this version of the model has her call sign on the hull. The model is 10.6 inches (27 cm) long.

This model shows the U.S.S. Enterprise as it looked during the original Star Trek TV series, when it was under the command of Captain Kirk. The Enterprise was a Constitution-class ship that was famously given the mission “to boldly go where no man has gone before.” It also supported Federation colonies and patrolled the Federation’s borders. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book that includes a profile of the ship with annotated plan views and in-depth information about the production of the original Star Trek, featuring original concept art from the Enterprise’s designer Matt Jefferies and insights from rare production documents that reveal how the show developed.  This is a pre-order that will ship in September 2026 – Star Trek’s 60th anniversary. 

The Galaxy-class U.S.S. Enterprise NCC-1701-D was Starfleet’s flagship in the 2360s and early 2370s. Under the command of Captain Jean-Luc Picard it was the first Starfleet ship to make contact with Q. Its crew defeated the Borg during their first attempt to invade the Federation and prevented the Romulans from interfering with the Klingon civil war. It was destroyed in 2371 after an encounter with the Klingon renegades Lursa and B’Etor. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book that includes a profile of the ship with annotated plan views and in-depth information about the production of Star Trek: The Next Generation based on extensive interviews with the show’s creators.  The book features rare behind-the-scenes photography and production art.

Turn your desk into the bridge of a starship with this extra large desk mat, designed to sit under your keyboard and mouse. The mat uses artwork created for the Conn station on the U.S.S. Stargazer in Season 2 of Star Trek: Picard, and it's almost impossible to resist tapping it as if you were pressing the buttons.

The mat measures 31.25" by 11.5". It has a rubber surface with stitched edges and a non-slip back.

The Rescue Eagle appeared in several episodes of Space 1999, and played a particular big role in “Earthbound”, which was the fifth episode to be filmed. The rescue pod was painted with distinctive red stripes, suggesting that it was similar to an ambulance. These stunning models are based on the acclaimed Sixteen 12 tooling. This model of the Rescue Eagle Transporter is 5.5 inches (13 cm) long and has a detachable pod. It is a similar size to Master Replicas’ Starship Library series.