The F-302 fighter interceptor was Earth's first fighter designed to operate in space. It was developed using alien technology that was acquired through the use of the stargates, and was armed with railguns and guided missiles. It had a hyperdrive and could make interstellar journeys.

Length: 4 inches (10 cm); Width: 8 inches (20 cm)

One of the most iconic designs in the history of Stargate. The Goa'uld used Ha'tak motherships to impose their will on the Galaxy.

These vast ships resembled giant, spaceborne pyramids and were equipped with fearsome firepower. After the fall of the Goa'uld they were operated by the Free Jaffa.

This is one of a limited number of Stargate models produced by Eaglemoss.

The model is 8 inches (20 cm) wide.

The Puddle Jumpers were Ancient ships that were used to fly through the Stargates to different locations in the Pegasus Galaxy. The Master Replicas model is based on the original VFX files that were used on Stargate Atlantis.

The model itself is just under 6 inches (15 cm) long.

The Starship Destiny was built by the Ancients and launched more than fifty million years ago. Its role: to seed stargates and investigate a mysterious message hidden in the fabric of the universe. What happened to the ship and her crew is a mystery. The arrival of an expedition from Earth, who activated the the ship’s stargate in 2009, provided the Destiny with a new crew — and a new mission.

The model is made of die-cast and measures 8.75 inches (22 cm) from front to back.

This incredibly detailed polyresin model recreates Ra's Pyramid from the Stargate movie. This is a real statement piece that measures an impressive 12 inches (30 cm) across and stands over 8 inches (20 cm) tall.

In the movie, Daniel Jackson (played by James Spader) discovers that the ancient Egyptians were enslaved by a race of powerful aliens, known as the Goa'uld System Lords. Their ships were shaped like giant pyramids that open up to launch waves of airborne fighters.

Our model of the Pyramid was sculpted by Ed Giddings with careful reference to the original model that was used to film the visual effects in the movie. Even the individual hieroglyphs have been reproduced in relief.

Bilskirnir is Thor’s ship, which made its debut in the Stargate SG-1 season 2 episode ‘Thor’s Chariot’, when it saved SG-1 from the Goa’uld. Bilskirnir was an incredibly powerful Asgard mothership with advanced transporter systems, engines that could cover intergalactic distances in hours, and an ion gun that could obliterate a Goa’uld Hat’tak ship.

In Norse mythology 'Bilskirnir' refers to Thor’s hall, where he lived with his wife Sif and their children.

The Master Replicas die-cast model is 15cm long and is based on the original VFX model, which was supplied to us by the production team.

This is a replica of the gate that was found on the Destiny in Stargate Universe. This gate was more primitive than the versions found in the Milky Way Galaxy and had a much shorter range. The glyphs on this gate lit up as they were dialled, and the model shows the address for Earth. The gate had been left unused for thousands of years after the crew left the Destiny, but was revived by the team from Earth, who used it to gather supplies and explore the universe. The replica gate measures 9.25 inches (23.5 cm) across. It is made of polystone and comes with a separate display base that carries the SGU logo. Master Replicas has carefully reproduced every glyph on the gate, which was based on a digital model that was supplied by MGM. This is a preorder that is due to ship in October.

We've given the X-303 class Prometheus an upgrade. This was one of the last models that Eaglemoss produced and it didn't match their usual standards. For our new version, we've increased the weight and added more detail to the paint scheme.

The Prometheus was the first interstellar battleship developed by Earth. It was based on reverse-engineered Goa'uld technology and was later updated with Asgardian equipment to help it fight the Replicators. It played a vital role in defeating the System Lords. It was eventually destroyed by an Ori satellite.

The model is 7 inches (18 cm) long.

LIMITED EDITION. This extraordinary display case features a complete set of 1:21 figurines of all 17 Doctors in an acrylic TARDIS shelving unit that is designed to be fixed to a wall. A panel on the front (where the doors are) can be removed to reveal the Doctors inside. The display itself is an impressive 81 cm tall by 46 cm across.

The ships in The Expanse rely on an Epstein drive to reach the kinds of speed that make interplanetary travel practical. The drive was first tested on a second-hand yacht, and was discovered almost by accident.

This is one of the last models that Eaglemoss produced and we have them all.

Yacht length: 6 inches (16 cm); width: 4.7 inches (12 cm); height: 4.3 inches (11 cm).

The Razorback started life as Julie Mao's racing ship. Avasarala and Bobbie use it to escape from the Guanshiyin before Bobbie ends up owning it. She uses it to investigate the missing Martian ships, which she discovers have been sold to the Free Navy.

The Eaglemoss model is 7.25 inches (18.5 cm) long.

Since the first season of The Expanse the Rocinante has been at the heart of the action. It is an MCRN Corvette that was carried aboard the Martian navy flagship, the MCRN Donnager. After Holden and his crew took control they renamed it the Rocinante and it became their home.

In the real world the Roci was designed by Ryan Dening, who also worked on Star Trek.

This is the smaller of the two Eaglemoss versions, and it is 8.5" and (21.5 cm) long..

The Koto was an MCRN patrol destroyer that was illegally sold to Marco Inaros and became part of the Free Navy. It was one of several ships that attacked the Rocinante in the episode 'Hard Vacuum', when it was disabled by an attack from Drummer's ship.

The Koto was designed by Ryan Dening, who also designed many ships for Star Trek.

It was produced but never sold by Eaglemoss and we have acquired all the stock. Length approximately 9 inches (22 cm).

The Expanse collection was launched in the last days of Eaglemoss and had only limited distribution. The first model was an XL version of the series' main ship — the Rocinante, a Martian corvette that ended up under the charge of James Holden.

The Eaglemoss model measures 12.8 inches (32.5 cm) long and comes in its original box.

This incredible sixth scale statue shows the Fifteenth Doctor as he made his full debut in "The Church on Ruby Road". This Doctor has an irrepressible passion for life, and takes great pleasure in the way he dresses.

The statue is in scale with Eaglemoss's mega statues, and is perfect to be displayed alongside the other Doctors including the Fourth and the Tenth. It was sculpted digitally before being cast in a high quality resin and painted by hand.

The statue stands 12.5 inches (32 cm) tall including the base.

Collectors edition, fully articulated figure of The Master. Featuring a fully realised likeness of Roger Delgado, authentically styled costume, highly detailed accessories and display base. Packaged in full-colour display box.

To celebrate the 25th anniversary of The Matrix, Master Replicas are releasing an incredibly detailed die-cast model of Morpheus's ship The Nebuchadnezzar.

When The Matrix was released in 1999, the Wachowskis changed cinema forever. Sci-fi had never been cooler. The original movie played with huge ideas as Morpheus and his allies freed Neo from his mundane reality and introduced him to the truth: a world where the machines have subjugated humanity.

The Nebuchadnezzar, which was designed by concept artist Tani Kunitake, was at the heart of the story. The Neb was a rusting hovercraft that used EM pulses to protect itself from the machines, as Morpheus and his crew managed to stay one step ahead of the robotic Sentinels.

This impressive die-cast model has been digitally sculpted before being cast in zinc alloy and ABS, and painted by hand. It has been officially licensed by Warner Bros. and is a true collectors item.

The ship measures 11.8 inches (30 cm) long.

When Doctor Who returned in 2005, the team built an entirely new TARDIS. This version was bigger than any of its predecessors and, in fact, bigger than an original London police box. The production team actually made four different versions of the prop but there were no significant differences between them.

The model is 1:21 scale to match the Eaglemoss figurines and stands 14.3 cm tall.

This is a pre-order that is due to ship in September.

The Sphere, or Cruiser, was the Kaylon's main attack ship. Each Cruiser was equipped with one Interceptor, which served as an auxiliary craft. All spheres were equipped with highly advanced technology, a single central cannon with impressive firepower and a hull that resisted target-locking.

Cruisers are capable of sustained quantum travel at 35 lightyears per hour.

The model is just under 7 inches (17.5 cm) across.

RARE SITE EXCLUSIVE The Kaylon Interceptor from The Orville is the smaller ship with a 'tail' that was carried inside the Kaylon sphere.

The model is just under 7 inches (17.5 cm) long.