This is a replica of the gate that was found on the Destiny in Stargate Universe. This gate was more primitive than the versions found in the Milky Way Galaxy and had a much shorter range. The glyphs on this gate lit up as they were dialled, and the model shows the address for Earth. The gate had been left unused for thousands of years after the crew left the Destiny, but was revived by the team from Earth, who used it to gather supplies and explore the universe. The replica gate measures 9.25 inches (23.5 cm) across. It is made of polystone and comes with a separate display base that carries the SGU logo. Master Replicas has carefully reproduced every glyph on the gate, which was based on a digital model that was supplied by MGM.

This action figure shows Ensign Beckett Mariner when she was a junior officer on the U.S.S. Cerritos in the series Star Trek: Lower Decks.

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a phaser and PADD. It is part of a new series that features characters from all the modern Star Trek shows.

This action figure shows Admiral Jean-Luc Picard in his civilian clothes, armed with a phaser, as he visits the U.S.S. Titan NCC-80102-A in the third season of Star Trek: Picard

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a PaDD. It is part of a new series that features characters from all the modern Star Trek shows.

This is the first in a new line of detailed Stargate desktop replicas, reproducing some of the most iconic props from the classic TV series. This is a beautifully detailed replica of the helmet worn by Apophis’s Serpent Guard. As befits the Serpent god, the helmet is designed to look like a cobra. The Serpent Guard was made up of Apophis’s most trusted Jaffa and for centuries they were dedicated to serving him. That began to change when Apophis’s First Prime, Teal’c, turned on him and joined SG-1. The replica helmet was digitally sculpted, based on careful study of the original props. It has been cast in polyresin to ensure a high level of accuracy, before being painted. The helmet is the perfect size to sit on a desk or shelf and is just under 6” (15 cm) tall when displayed on its bespoke stand.

"This is the second in a new line of detailed Stargate desktop replicas, reproducing some of the most iconic props from the classic TV series. This is a beautifully detailed replica of the helmet worn by the Horus Guard. As befits the falcon god, the helmet is designed with the fierce, hooked beak and sculpted headdress of Horus himself. The Horus Guards served Ra and later Heru'ur, and their helmets were among the first sights to greet SG-1 when they stepped through the gate to Abydos - a warning that the gods of Earth's ancient past were very much alive, and still ruling. The replica helmet was digitally sculpted, based on careful study of the original props. It has been cast in polyresin to ensure a high level of accuracy, before being painted. The helmet is the perfect size to sit on a desk or shelf and is just under 6"" (15 cm) tall when displayed on its bespoke stand."

This is Master Replicas first ever Doctor Who ship: the Dalek saucer from 2005's 'The Parting of the Ways'. This impressive polyresin model is 21 cm across and was sculpted by Dalek expert Gavin Rymill. The Daleks used saucers with a similar design in the TV Century 21 Dalek comic strip, but in the 1960s TV budgets didn't stretch to expensive spaceship models. The classic Dalek ship only made its debut in 2005 when a massive fleet of Dalek ships prepared to invade Earth. The ship was made as a 3D CG model by the Mill. Master Replicas recruited Dalek expert Gavin Rymill to recreate the ships using renders made at the time and careful study of the episodes. 

This action figure shows Ensign Brad Boimler when he was a junior officer on the U.S.S. Cerritos in the series Star Trek: Lower Decks.

Boimler has always been one of the most anxious members of the crew and was eager to impress.

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a phaser and PADD. It is part of a new series that features characters from all the modern Star Trek shows.

NOW SHIPPING

The Ma’tok staff (commonly known as a staff weapon) was the Jaffa’s weapon of choice. It is designed to fire bolts of plasma, with a range of 50-60 meters. The intensity of the blasts, which are powered by a Naquadah generator, can be adjusted so it can stun a human or blast through rock. At close quarters they were often used as a conventional staff weapon. The full-size staff was 6’ 6” (2 m) tall. The desktop replica was digitally sculpted with careful reference to the original props. It  is 12” (30 cm) long and comes with a stand that can be used to display it vertically or horizontal. Prototype images, Final Staff will be diecast for strength and hand finished.

This action figure shows Lt. Spock as portrayed by Ethan Peck in Strange New Worlds. He carries a phaser and tricorder.  The figure is 4.5 inches (11.4 cm) tall. and is part of a new series that features characters from all the modern Star Trek shows.

"The latest Stargate desktop replica is an incredibly detailed replica of the helmet worn by Anubis’s Jaffa guards. Anubis was one of the most dangerous system lords. Centuries ago, he killed his master Apep and set himself up as the Emperor of the Goa’uld. This led to a civil war, which ended when Ra overthrew Anubis and banished him. At the turn of the 21st century Anubis returned to assume command of the Goa’uld. Anubis was known as the jackal god and this was reflected in the design of the helmets worn by his Jaffa. The helmets were only actually seen in the movie and at the end of Season 8 when they were worn by Jackal guards in Ra’s service. The replica helmet was digitally sculpted, based on careful study of the original props. It has been cast in polyresin to ensure a high level of accuracy, before being painted. The helmet is the perfect size to sit on a desk or shelf and is just under 6” (15 cm) tall when displayed on its bespoke stand."

This action figure shows Worf in his Starfleet uniform, armed with a kur'leth, as he comes to Admiral Picard's aid in the third season of Star Trek: Picard

The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

Shipping now - remember to use your Star Trek Day spend & save store credit

"This action figure shows D’Vana Tendi when she was an ensign aboard the U.S.S. Cerritos in the early 2380s. The Cerritos was her first posting after she graduated from Starfleet Academy and she started her career in sickbay before she was assigned to the senior science officer training program. Tendi’s green skin is typical of Orions. She comes with a phaser and a tricorder.  The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows."

LIMITED EDITION • WEBSITE EXCLUSIVE

In ‘The Happiness Patrol’ the Doctor and Ace land on the planet Terra Alpha, where sadness is against the law. In an effort to enforce joy, Helen A’s Happiness Patrol paint the TARDIS pink. After the Doctor helps with the rebellion, normal emotions are restored and the TARDIS is painted blue again.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

This action figure shows Captain William Riker in his Starfleet Uniform, armed with a phaser, as he returns to the bridge of theU.S.S. Enterprisen NCC-1701-D in the third season of Star Trek: Picard

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a phaser rifle. It is part of a new series that features characters from all the modern Star Trek shows.

NOW SHIPPING remember to use your Star Trek Day spend & save store credit

The original version of the TARDIS was modified at the end of the show’s third season. The design of the roof was altered so that it was flatter, and new doors were made with a new lock. This version first appeared in “The War Machines” and was used throughout the Second Doctor’s tenure. It was given a refit before “The War Games”.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

This incredibly detailed polyresin model recreates Ra's Pyramid from the Stargate movie. This is a real statement piece that measures an impressive 12 inches (30 cm) across and stands over 8 inches (20 cm) tall.

In the movie, Daniel Jackson (played by James Spader) discovers that the ancient Egyptians were enslaved by a race of powerful aliens, known as the Goa'uld System Lords. Their ships were shaped like giant pyramids that open up to launch waves of airborne fighters.

Our model of the Pyramid was sculpted by Ed Giddings with careful reference to the original model that was used to film the visual effects in the movie. Even the individual hieroglyphs have been reproduced in relief.

The VIP Eagle brought Commissioner Simmonds to Moonbase Alpha, after John Koenig discovered dangerous levels of magnetic activity. When the Alphans tried to disperse the radioactive waste that was causing the problem, Alan Carter took the VIP Eagle in to lunar orbit and was onboard when he witnessed the explosion that threw the moon out of Earth’s orbit. Unlike the standard Eagles, the VIP Eagle has a distinctive orange pod. These stunning models are based on the acclaimed Sixteen 12 tooling. This model of the VIP Eagle Transporter is 5.5 inches (13 cm) long and has a detachable pod. It is a similar size to Master Replicas’ Starship Library series.

During the Seventh Doctor’s tenure, there were actually three different versions of the TARDIS, all of which were made of fibreglass. They were all cast from the same moulds, but there were differences to do with the frame around the sign at the top and the position of the lock and handles. These TARDIS props had doors on the front and the back. On one side, the door opened on the left; on the other side, it opened on the right.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

"In Gerry Anderson’s UFO the interceptors were one-man fighters that were S.H.A.D.O.’s first line of defense against the alien UFOs. They were based on the moon and typically operated in groups of three. Each Interceptor carried a nuclear missile, which the three fighters fired simultaneously to create a wide area of destruction. They were designed to operate in space rather in the Earth’s atmosphere. The die-cast model measures 7” (18 cm) from top to stern, and is based on the acclaimed Sixteen 12 tooling. "