Battles in Time presents the next in its line of limited-edition collector's cards focused on the individual Doctors, their companions and their greatest foes. Each set of 15 cards comes in a special collector's pack that is guaranteed to contain every card. The Second Doctor set features companions Jamie and Zoe, the TARDIS and Brigadier Lethbridge-Stewart, alongside nine terrifying monsters including a Yeti, an Ice Warrior, the Cybermen and the Dalek Emperor, plus rogue Time Lord the War Lord. Hidden inside one in every ten collector's sets is the rarest card Battles in Time has ever produced: a metal vortex card, in a super limited edition of just 100 worldwide. Only a hundred collectors will ever own one — and there is no other way to get it. The Second Doctor cards are printed in the original black and white on silver foil, in strictly limited-edition sets of 1,000 pieces worldwide. These cards are not available anywhere else.

The original series Cylon Baseships consisted of twin discs built around a central column. They served as both heavily armed warships and carriers for the smaller Cylon Raiders. They were designed by legendary concept artist Ralph McQuarrie, who worked on Battlestar Galactica after his concept work for Star Wars.

The model measures approximately 6 inches (15.5 cm) across.

HOT DOG VARIANT LIMITED TO 750

The modern Viper is a careful update of Ralph McQuarrie's original design that was created for the 2004 reimagining of Battlestar Galactica. Writer and producer Ron D. Moore wanted to make the show about life on an spaceborne aircraft carrier and the Vipers and their pilots were central to his plans.

The Eaglemoss model bears the call sign "HOT DOG" for pilot Lt. Brendan Constanza, and is 10.6 inches (27 cm) long.

In the 2004 reimagined Battlestar Galactica, the fleet was regularly menaced by Cylon Raiders, which mounted strafing attacks on the human ships. The Cylon ships had a low level of sentience, which the show's creator Ron D. Moore likened to that of a horse.

The menacing design was created by concept artist Eric Chu, who gave it echoes of the design for the Cylon Centurion.

The Eaglemoss model is 10.6 inches (27 cm) long.

The far-future U.S.S. Voyager-J — die-cast, with a 48-page collector book.

The U.S.S. Voyager NCC-74656-J is a 32nd-century descendant of Captain Janeway's famous ship. It follows a similar design but with detached hulls and nacelles and programmable matter, and served as the testbed for the dilithium-free Pathway drive.

Why you'll love it

• A tribute across eras — designed by Ryan Dening to link the different generations of Star Trek.
• The 48-page collector book — features a brand-new, in-depth interview with Discovery showrunner Michelle Paradise. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

"The Alkesh was a mid-sized vessel that the Goa’uld used as a troop transport and as a bomber. It was capable of traveling faster than light and could enter a planet’s atmosphere, where it was often used to mount “bombing” raids using plasma charges. When it was used as a troop transport, the Jaffa were deployed using transportation rings. The model is based on the original CG asset used on the show and is 7.25” (18.5 cm) long. "

The Sphere, or Cruiser, was the Kaylon's main attack ship. Each Cruiser was equipped with one Interceptor, which served as an auxiliary craft. All spheres were equipped with highly advanced technology, a single central cannon with impressive firepower and a hull that resisted target-locking.

Cruisers are capable of sustained quantum travel at 35 lightyears per hour.

The model is just under 7 inches (17.5 cm) across.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Voyager. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop in 1994. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that Voyager was an Intrepid-class starship that was launched from Earth Station McKinley on Stardate 48038.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Voyager.

This action figure shows Ensign Beckett Mariner when she was a junior officer on the U.S.S. Cerritos in the series Star Trek: Lower Decks.

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a phaser and PADD. It is part of a new series that features characters from all the modern Star Trek shows.

The original 2250s D7 battle cruiser — die-cast, with a 48-page collector book.

The D7 is one of the most important ships in the Klingon fleet. This is the original version of the class, commissioned by High Chancellor L'Rell to unite the Klingon Houses, and seen on both Discovery and Strange New Worlds.

Why you'll love it

• A design with heritage — by Ryan Dening, honouring Matt Jefferies' original and the Motion Picture redesign.
• The 48-page collector book — in-depth articles from new interviews with Bryan Fuller and Kirsten Beyer, plus original production artwork. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

This version of the Viper appeared in the TV movie Blood & Chrome, which showed us a pivotal battle in the First Cylon war. The design is close to the version that artist Ralph McQuarrie designed for the original 1978 series, but was made more muscular and upgraded for modern audiences.

The Eaglemoss model is just under 10.5 inches (26.5 cm) long.

The Union Fighter PT-197, better known as the Pterodon, is a super-sleek one-man fighter, which made its debut at the beginning of the third season of The Orville. It was part of a new fleet of fighters that was introduced in the aftermath of the Kaylon War. It is incredibly maneuverable and, as Gordon will tell you, a hell of a lot of fun to fly.

The model, which measures just under 9 inches (22 cm)nose to tail, is made of die-cast and is based on the original CG model that was created for the show. It has never been available before.

Shipping From December 2024

"The Rescue Eagle appeared in several episodes of Space 1999, and played a particular big role in “Earthbound”, which was the fifth episode to be filmed. The rescue pod was painted with distinctive red stripes, suggesting that it was similar to an ambulance. These stunning models are based on the acclaimed Sixteen 12 tooling. This model of the Rescue Eagle Transporter is 5.5 inches (13 cm) long and has a detachable pod. It is a similar size to Master Replicas’ Starship Library series. "

This action figure shows Admiral Jean-Luc Picard in his civilian clothes, armed with a phaser, as he visits the U.S.S. Titan NCC-80102-A in the third season of Star Trek: Picard

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a PaDD. It is part of a new series that features characters from all the modern Star Trek shows.

"The Laboratory Eagle appeared in the Space 1999 story “The Metamorph”, which opened the second season and introduced Maya. When two Alphan pilots were captured by Mentor, Commander Koenig took Eagle 4 to retrieve them. He ordered it to be fitted with a laboratory pod and with additional booster engines that were mounted on the top and were designed to increase its power and speed. These stunning models are based on the acclaimed Sixteen 12 tooling. This model of the laboratory Eagle Transporter is 5.5 inches (13 cm) long and has a detachable pod. It is a similar size to Master Replicas’ Starship Library series."

Kirk's Constitution-class U.S.S. Enterprise — die-cast, with a 48-page collector book.

This model shows the U.S.S. Enterprise as it looked in the original Star Trek series, under Captain Kirk. A Constitution-class ship famously charged “to boldly go where no man has gone before.”

Why you'll love it

• The ship that started it all — the definitive Star Trek silhouette.
• The 48-page collector book — the making of the original Star Trek, with original concept art from designer Matt Jefferies and insights from rare production documents. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

This is the first in a new line of detailed Stargate desktop replicas, reproducing some of the most iconic props from the classic TV series. This is a beautifully detailed replica of the helmet worn by Apophis’s Serpent Guard. As befits the Serpent god, the helmet is designed to look like a cobra. The Serpent Guard was made up of Apophis’s most trusted Jaffa and for centuries they were dedicated to serving him. That began to change when Apophis’s First Prime, Teal’c, turned on him and joined SG-1. The replica helmet was digitally sculpted, based on careful study of the original props. It has been cast in polyresin to ensure a high level of accuracy, before being painted. The helmet is the perfect size to sit on a desk or shelf and is just under 6” (15 cm) tall when displayed on its bespoke stand.

"This is the second in a new line of detailed Stargate desktop replicas, reproducing some of the most iconic props from the classic TV series. This is a beautifully detailed replica of the helmet worn by the Horus Guard. As befits the falcon god, the helmet is designed with the fierce, hooked beak and sculpted headdress of Horus himself. The Horus Guards served Ra and later Heru'ur, and their helmets were among the first sights to greet SG-1 when they stepped through the gate to Abydos - a warning that the gods of Earth's ancient past were very much alive, and still ruling. The replica helmet was digitally sculpted, based on careful study of the original props. It has been cast in polyresin to ensure a high level of accuracy, before being painted. The helmet is the perfect size to sit on a desk or shelf and is just under 6"" (15 cm) tall when displayed on its bespoke stand."

The Galaxy-class U.S.S. Enterprise-D — die-cast, with a 48-page collector book.

The Galaxy-class U.S.S. Enterprise-D was Starfleet's flagship in the 2360s and early 2370s. Under Captain Picard it made first contact with Q, broke the Borg's first invasion of the Federation, and was destroyed in 2371 after an encounter with the renegades Lursa and B'Etor.

Why you'll love it

• The heart of The Next Generation — one of the most beloved ships in all of Star Trek.
• The 48-page collector book — the making of TNG, from extensive interviews with the show's creators. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.