This is a replica of the original stargate from Stargate SG-1, also known as the Alpha Gate. The gates were developed over 50 million years ago by the Ancients and can be used to open wormholes between different planets and even different galaxies. The Ancients called them Astria Porta and seeded them throughout the Pegasus and Milky Way galaxies. When the Goa'uld took control of them they called them Chappa'ai, which Daniel Jackson translated as "stargate".

The gate used by SG-1 was buried by the ancient Egyptians after they overthrew the Goa'uld Ra. It was uncovered in 1928 and was eventually powered up at a secret facility in Cheyenne Mountain. It has nine chevrons and 39 glyphs that can be used to dial the address of thousands of inhabited planets.

The model is made of a high quality polystone, which holds the detail exceptionally well. The gate itself has a diameter of 9.25 inches (23.5 cm). It is an individual piece that can be slotted into the display stand, which bears the SG-1 symbol from the planet Earth.

This is a replica of the Pegasus gate from Stargate Atlantis. It was discovered in the city of Atlantis after Daniel Jackson realised that, if they had enough power, the stargates could be used to travel between galaxies.

The Atlantis Gate was an upgrade on the SG-1 version. On the show its glyphs appeared digitally, as the crew dialed into a new location. The gate had been left unused for thousands of years after the Ancients fled to the Milky Way after losing their battle with the Wraith, but was revived by the Pegasus team.

The replica gate is made of polystone and comes with a separate display base that carries the Stargate Atlantis logo. Master Replicas has carefully reproduced every glyph on the gate, which was based on a digital model that was supplied by MGM.

The model measures 9.25 inches (23.5 cm) across.

Shipping From: January 2025

This is a replica of the gate that was found on the Destiny in Stargate Universe. This gate was more primitive than the versions found in the Milky Way Galaxy and had a much shorter range. The glyphs on this gate lit up as they were dialled, and the model shows the address for Earth. The gate had been left unused for thousands of years after the crew left the Destiny, but was revived by the team from Earth, who used it to gather supplies and explore the universe. The replica gate measures 9.25 inches (23.5 cm) across. It is made of polystone and comes with a separate display base that carries the SGU logo. Master Replicas has carefully reproduced every glyph on the gate, which was based on a digital model that was supplied by MGM. This is a preorder that is due to ship in October.

This incredibly detailed polyresin model recreates Ra's Pyramid from the Stargate movie. This is a real statement piece that measures an impressive 12 inches (30 cm) across and stands over 8 inches (20 cm) tall.

In the movie, Daniel Jackson (played by James Spader) discovers that the ancient Egyptians were enslaved by a race of powerful aliens, known as the Goa'uld System Lords. Their ships were shaped like giant pyramids that open up to launch waves of airborne fighters.

Our model of the Pyramid was sculpted by Ed Giddings with careful reference to the original model that was used to film the visual effects in the movie. Even the individual hieroglyphs have been reproduced in relief.

This is a preorder that will be shipping from July.

This is Master Replicas first ever Doctor Who ship: the Dalek saucer from 2005's 'The Parting of the Ways'. This impressive polyresin model is 21 cm across and was sculpted by Dalek expert Gavin Rymill. The Daleks used saucers with a similar design in the TV Century 21 Dalek comic strip, but in the 1960s TV budgets didn't stretch to expensive spaceship models. The classic Dalek ship only made its debut in 2005 when a massive fleet of Dalek ships prepared to invade Earth. The ship was made as a 3D CG model by the Mill. Master Replicas recruited Dalek expert Gavin Rymill to recreate the ships using renders made at the time and careful study of the episodes. 

When Doctor Who returned in 2005, the team built an entirely new TARDIS. This version was bigger than any of its predecessors and, in fact, bigger than an original London police box. The production team actually made four different versions of the prop but there were no significant differences between them.

The model is 1:21 scale to match the Eaglemoss figurines and stands 14.3 cm tall.

This is a pre-order that is due to ship in September.

LIMITED EDITION • WEBSITE EXCLUSIVE

In ‘The Happiness Patrol’ the Doctor and Ace land on the planet Terra Alpha, where sadness is against the law. In an effort to enforce joy, Helen A’s Happiness Patrol paint the TARDIS pink. After the Doctor helps with the rebellion, normal emotions are restored and the TARDIS is painted blue again.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

This is a pre-order that is due to ship in September.

The original TARDIS prop was modified in “The War Games” and this version was used throughout the Third Doctor’s stories and for the Fourth Doctor's first two seasons. Various repairs were made during this time, most notably, it was given a fresh coat of paint. The original prop was eventually retired in 1976, meaning it had been in service for 13 years.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.9 cm tall.

This is a pre-order that is due to ship in September.

The original version of the TARDIS was modified at the end of the show’s third season. The design of the roof was altered so that it was flatter, and new doors were made with a new lock. This version first appeared in “The War Machines” and was used throughout the Second Doctor’s tenure. It was given a refit before “The War Games”.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

This is a pre-order that is due to ship in September.

During the Seventh Doctor’s tenure, there were actually three different versions of the TARDIS, all of which were made of fibreglass. They were all cast from the same moulds, but there were differences to do with the frame around the sign at the top and the position of the lock and handles. These TARDIS props had doors on the front and the back. On one side, the door opened on the left; on the other side, it opened on the right.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

This is a pre-order that is due to ship in September.