Step on board Captain Kirk's Enterprise with this beautifully detailed toy phaser with authentic lights and sound. This classic toy was originally issued by Diamond Select and was widely praised for its accuracy and functionality. Master Replicas are reissuing it with updated sound effects, which like the ones on the original, were used on the original episodes.

The Type-2 phaser was the pistol version of this classic weapon. The smaller Type-1 phaser slots on to the top and contains the power settings. Turning the dial on the toy version changes the sound effects from low intensity stun or heat to the rarely seen (or heard) overload. The trigger activates the light on the front.

The phaser is full-scale and was carefully modelled on the original prop, making it ideal for cosplay. It takes three LR44 batteries that are fitted to the Type-1 phaser. The batteries are not included.

This is a pre-order that will ship in the second half of 2026

Get ready to join an Enterprise landing party with this detailed toy tricorder from the original Star Trek series with authentic lights and sound. The tricorder is based on careful study of the original prop. It is full size and measures 7.25” (19 cm) tall by 4.75” (12 cm) across.

The head flips up to reveal an illuminated display and three buttons each of which activates different sound effects, including the original scanning and calculating effects, and eight different pieces of dialogue taken directly from the original episodes.

Open the top flap to reveal the recording discs and the moire pattern, which moves when you press the center button. The lower compartment contains more moulded recording discs and a separate handheld scanner, which pulses with different colored lights when it is activated.

The tricorder takes three AAA batteries; the hand-held scanner takes two LR44 batteries, which are not included.

This is a pre-order that will ship in the second half of 2026

RARE Eaglemoss 1:10 scale statue from a series of Star Trek: Discovery versions of the Enterprise crew. The first statue in the series shows Spock as portrayed by Ethan Peck, wearing the Discovery version of his Starfleet uniform.

This Eaglemoss series was never released, but a small amount of the stock found its way into the market. The statue measures approximately 8 inches (20 cm) tall.

There's nothing better to cuddle up to than this plush version of Star Trek: Lower Decks Badgey. Sure, he's a psychopath who wants to kill us all, but rendered in plush, he couldn't be cuter or cuddlier.

Badgey was originally a training hologram, who was created by Rutherford. Unfortunately, he was made using unstable AI and, after some holodeck malfunctions, he gained sentience and set out to kill his creator. Despite having his neck broken and his memory wiped, he kept coming back before eventually evolving into a digital god and heading off to create his own universe.

Badgey is the second in Master Replicas Lower Decks plush series and joins Moopsy, which is back in stock after a sell-out first run.

Order now to get the first edition, which comes with a limited-edition Badgey card.

Size: 10 inches x 5.5 inches (25 cm x 14 cm).

One of the most terrifying sounds in the Universe is "Moopsy". At first it may sound cute but seconds after you hear it, Moopsy will drink your bones.

This large talking plush reproduces the terror perfectly. Cuddle up to Moopsy if you dare and squeeze Moopsy's paw to hear Moopsy speak.

Moopsy  briefly escaped from captivity in Narj's Miraculous Menagerarium the Star Trek: Lower Decks episode "I Have No Bones Yet I Must Flee".

At 14" long, this Moopsy is also bigger than our original plush.

Size: 14 inches (25 cm )

Turn the sound on in the video to hear Moopsy talk.

Note: When this item ships, batteries will not be included, due to rules over importation and regulations

"This is the first in a series of briefing packs that provide a unique insight into Star Trek ships. Jett Reno’s Guide to the U.S.S. Athena is an internal document that was created by the Star Trek: Starfleet Academy art department to provide the writers and directors with essential information about the ship. It includes annotated exterior views, information about the ship’s different modes and its transformation and landing procedures, schematics showing the location of all the key systems including classrooms and dorms, and diagrams of all the key sets. The briefing pack consists of 120 pages and comes in a presentation portfolio."

In the original series the crew regularly drank coffee from grey cups. In one of the most famous incidents, Kirk discovers that tribbles have got into his dinner, eaten his chicken sandwich and drunk his coffee.

The cups were originally made of styrofoam, whereas ours are made of earthenware. We've also added a detail that you might have missed. When the cups first appeared in 'Where No Man Has Gone Before', they featured an Enterprise logo with a wreath, but it never appeared on them again. With a little help, we sourced that logo from Gene Roddenberry's files at UCLA and have included it on our cup. The tribble is removable, so your coffee should be safe.

Eaglemoss made replicas of the dedication plaques found on the bridge of Starfleet ships. This plaque is for Captain Archer's ship - the Enterprise NX-01, and features the ship's motto 'to boldly go where no man has gone before.'

The Eaglemoss plaques are designed to be displayed on a wall or on a shelf, and measure approximately 10.25 inches (26 cm) across.

The bridge of every Starship has a dedication plaque that records where it was built and when it entered service, and lists its class, registry and motto.

Eaglemoss produced a series of plaque replicas, designed to be hung on a wall or displayed on a shelf.

This plaque replicates that of the Crossfield-class U.S.S. Discovery and features the motto "All things can be understood once they are discovered; the point is to discover them."

The plaque measures approximately 9 inches (22 cm) across.

The U.S.S. Shenzhou was commanded by Captain Philippa Georgiou. The dedication plaque on the bridge revealed that it was a Walker-class ship that was constructed at the San Francisco Shipyards. The plaque also reveals that its motto was "All existing things are really one."

The Eaglemoss replica plaque is 8.66 inches (22 cm) long by 6.3 inches (16 cm) tall, and is designed for wall or shelf display.

The U.S.S. Franklin's dedication plaque could be seen on the bridge of the historic ship. The Eaglemoss replica, for wall or shelf display, reveals that the prop used in the movie describes the ship as 'Starship class' and had the motto 'To Boldly Go Where No Man Has Gone Before'.

The Eaglemoss replica is just under 9 inches (22.5 cm) across.

Turn your desk into the bridge of a Constitution-class starship with this extra large desk mat, which is designed to sit under your keyboard and mouse. The artwork is taken directly from displays on the bridge of Captain Kirk's Enterprise as seen in the original series.

The mat measures 31.25" by 10". It has a rubber surface with stitched edges and a non-slip back.

Turn your desk into the bridge of a starship with this extra large desk mat, that's designed to sit under your keyboard and mouse. The mat uses artwork created for Data's Ops station on the U.S.S. Enterprise NCC-1701-D and it's hard to resist tapping it as if you were pressing the buttons.

The mat measures 31.25" by 10". It has a rubber surface with stitched edges and a non-slip back.

Turn your desk into the bridge of a starship with this extra large desk mat, designed to sit under your keyboard and mouse. The mat uses artwork created for the Conn station on the U.S.S. Stargazer in Season 2 of Star Trek: Picard, and it's almost impossible to resist tapping it as if you were pressing the buttons.

The mat measures 31.25" by 11.5". It has a rubber surface with stitched edges and a non-slip back.

TCG have launched a range of Star Trek characters as part of their FleXfigs range.

These classic bendable toys from the 90s — that can be can be pulled and stretched into different poses — are making a comeback! They're starting off with four of Starfleet's greatest captains: James T. Kirk, Christopher Pike, Jean-Luc Picard, and Benjamin Sisko. We've managed to secure some of the box sets with all four captains.

The figures measure 4.5 inches (12 cm) tall.

Prove you’re the ultimate Lower Decks fan! Answer hundreds of trivia questions, choose your rank, challenge friends, and earn your promotion.

"Discover the inside story of the rebirth of one of Star Trek’s most beloved sets: the bridge of the U.S.S. Enterprise NCC-1701-D, which made an emotional return in Star Trek: Picard. Art director Liz Kloczkowski was tasked with bringing this iconic set back to life. Now she has written the ultimate insider account, revealing how the art department unearthed every piece of information they could find and, working with an army of skilled crafts people and Star Trek legends, they rebuilt the bridge in immaculate detail. This is an incredibly thorough and detailed account, packed with hundreds of rare photographs, plus original concept art and blueprints. A fascinating look at a unique episode of Star Trek history! Forewords by showrunner Terry Matalas and production designer Dave Blass Afterword by TNG´s original production designer Herman Zimmerman"

This is a full-scale polyresin replica of the dedication plaque from the bridge of the U.S.S. Enterprise NCC-1701-D. This is the version that featured in Seasons 5 through 7 of Star Trek: The Next Generation. The plaque was designed by Scenic Art Supervisor Mike Okuda, who gave us the files he originally supplied to Jeff Clare in the Paramount sign shop. We used them to create this version, which is designed to be hung on a wall. At 11.5” x 9” (29 cm by 22.7 cm) this plaque is smaller than the plaques that were designed for Star Trek: Deep Space Nine and Star Trek: Voyager. The plaque comes without the wooden frame that featured on the bridge. The plaque details the date the ship was launched, where it was constructed, and its motto. As an in-joke it features the names of several members of the production team, who are listed as members of the Starfleet team that built the ship.  

Drink like a Starfleet officer with these exclusive mugs straight from the 25th century.

These brushed steel mugs would look right at home in Starfleet. Each one features the logo of a different division: Starfleet Academy in San Francisco, where generations of Starfleet officers have been trained; the Galaxy Class Starship Design Project, which was responsible for designing and building the U.S.S. Enterprise NCC-701-D; and Starfleet Headquarters itself.

The mugs were designed and created by Eaglemoss and are limited edition; exclusively available through MasterReplicas.com.

The mugs are 500ml / 17oz.

Drink like a Starfleet officer with these exclusive mugs straight from the 25th century.

These brushed steel mugs would look right at home in Starfleet. Each one features the logo of a different division: Starfleet Academy in San Francisco, where generations of Starfleet officers have been trained; the Galaxy Class Starship Design Project, which was responsible for designing and building the U.S.S. Enterprise NCC-701-D; and Starfleet Headquarters itself.

The mugs were designed and created by Eaglemoss and are limited edition; exclusively available through MasterReplicas.com.

The mugs are 500ml / 17oz.