This version of the Viper appeared in the TV movie Blood & Chrome, which showed us a pivotal battle in the First Cylon war. The design is close to the version that artist Ralph McQuarrie designed for the original 1978 series, but was made more muscular and upgraded for modern audiences.

The Eaglemoss model is just under 10.5 inches (26.5 cm) long.

Eaglemoss made replicas of the dedication plaques found on the bridge of Starfleet ships. This plaque is for Captain Archer's ship - the Enterprise NX-01, and features the ship's motto 'to boldly go where no man has gone before.'

The Eaglemoss plaques are designed to be displayed on a wall or on a shelf, and measure approximately 10.25 inches (26 cm) across.

This is a full-sized, polyresin replica (15 inches wide) of the dedication plaque for the original series Enterprise. It was on the bridge of the ship just to the right of the turbolift doors.

The plaque was carefully researched by Star Trek scenic artist Mike Okuda who supplied us with detailed drawings that we used to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time an officially licensed full-size version has ever been available.

You may be surprised to see that it identifies the Enterprise as a Starship-class ship. The term Constitution class was used by fans but only became canon in the first season of TNG when it appeared on a computer readout in "The Naked Now".

Master Replicas is proud to announce the launch of a brand-new line of officially licensed Foundation model ships based on the hit Skydance Television series.

Leading the launch of this incredible new collectible line is the Imperial Jump Ship, a faster-than-light vessel used by the Empire to dominate space travel. This intricately detailed, 10.75-inch die-cast model is crafted using the original CG mesh used by the Foundation VFX team during the making of the series, ensuring an incredible degree of accuracy.

This is Master Replicas first ever Doctor Who ship: the Dalek saucer from 2005's 'The Parting of the Ways'. This impressive polyresin model is 21 cm across and was sculpted by Dalek expert Gavin Rymill. The Daleks used saucers with a similar design in the TV Century 21 Dalek comic strip, but in the 1960s TV budgets didn't stretch to expensive spaceship models. The classic Dalek ship only made its debut in 2005 when a massive fleet of Dalek ships prepared to invade Earth. The ship was made as a 3D CG model by the Mill. Master Replicas recruited Dalek expert Gavin Rymill to recreate the ships using renders made at the time and careful study of the episodes. 

This action figure shows Lt. Spock as portrayed by Ethan Peck in Strange New Worlds. He carries a phaser and tricorder. The figure is 4.5 inches (11.4 cm) tall. and is part of a new series that features characters from all the modern Star Trek shows.

This action figure shows Ensign Brad Boimler when he was a junior officer on the U.S.S. Cerritos in the series Star Trek: Lower Decks.

Boimler has always been one of the most anxious members of the crew and was eager to impress.

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a phaser and PADD. It is part of a new series that features characters from all the modern Star Trek shows.

This is a pre-order that will ship in September 2026

The Osiris dates from the first Cylon War and was part of the fleet that featured in Blood & Chrome. It was a stealth frigate, or pocket battleship. The original VFX model was designed by concept artist Richard Livingston.

The Eaglemoss model is just over 10.5 inches (27 cm) long.

The U.S.S. Voyager NCC-74656-J was a 32nd-century descendant of Captain Janeway's famous ship. It followed a similar design, but had detached hulls and warp nacelles and used programmable matter. It also acted as the tested for the Pathway drive, which worked without dilithium.

The ship was designed by Ryan Dening. The producers wanted it to be a tribute to Janeway's ship and to show the links between different eras of Star Trek.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which features a brand-new, in-depth interview with ,em>Discovery showrunner Michelle Paradise.

The D7 battle cruiser is one of the most important ships in the Klingon fleet. This is the original version of the class, which was commissioned by High Chancellor L'Rell to unite the Klingon Houses.

The ship was designed by Ryan Dening, who was careful to pay tribute to Matt Jefferies' original and the redesigned version that was made for Star Trek: The Motion Picture. Dening's version has appeared on both Star Trek: Discovery and Star Trek: Strange New Worlds.

The model is part of Master Replicas new range of 4 to 5-inch long, die-cast models, and is accompanied by a 48-page book, that features in-depth articles based on new interviews with writers Bryan Fuller and Kirsten Beyer, and original production artwork.

The 2004 series of Battlestar Galactica upgraded all the elements of the show, including the Cylons themselves. The modern version of the Centurion was a fully-CG creation that took the series' effects to a new level. In the show, the Centurions were ruthless killing machines with limited intelligence and self awareness.

The statue stands 7.5 inches (19 cm) tall.

Master Replicas, Insight Editions and Legendary Entertainment are proud to present the Harkonnen Ornithopter, a highly-detailed die-cast model of the iconic vehicle that menaced the skies of Arrakis in the Dune motion picture franchise produced by Legendary.

Shown in flight mode, with the landing gear up and the weapons deployed, the model boasts an impressive wingspan of just under two feet and measures 10.5 inches from nose to stern. It ships fully-assembled and painted, making for an exceptional display piece.

The Ornithopters make frequent appearances in Frank Herbert’s original Dune novels. The film’s art department developed different versions for House of Atreides and House of Harkonnen, with the Harkonnen versions being heavily armed. The result: a spectacular design that swoops over the Arrakean desert raining terror on the Fremen and anything in the Harkonnens’ path.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Defiant. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that the Defiant was the first starship in its class and was launched from the Antares ship yards on Stardate 47538.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Deep Space Nine.

This is a preorder that will ship in the fall of 2025.

This action figure shows Worf in his Starfleet uniform, armed with a kur'leth, as he comes to Admiral Picard's aid in the third season of Star Trek: Picard

The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

This is a pre-order that will ship in July 2026

This is a light-up replica of the Master Systems Display from the bridge of the U.S.S. Voyager. It features the same graphic that was used on the TV series, which was created by Mike Okuda’s scenic art department. It shows all the ship’s key systems including the shuttlebay, warp cores, turbolift network, and main deflector. The panels are designed to be hung on a wall or displayed on a shelf. They are powered by a USB C cable and light up at the press of a button just like the displays on a starship. They work in a very similar way to the real displays used on the show with backlit film. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth. The light up panel measures an impressive 31.5” (60 cm) across and is 10.25” (26 cm) high. This is a preorder that will ship in Summer 2026.

The bridge of every Starship has a dedication plaque that records where it was built and when it entered service, and lists its class, registry and motto.

Eaglemoss produced a series of plaque replicas, designed to be hung on a wall or displayed on a shelf.

This plaque replicates that of the Crossfield-class U.S.S. Discovery and features the motto "All things can be understood once they are discovered; the point is to discover them."

The plaque measures approximately 9 inches (22 cm) across.

When Doctor Who returned in 2005, the team built an entirely new TARDIS. This version was bigger than any of its predecessors and, in fact, bigger than an original London police box. The production team actually made four different versions of the prop but there were no significant differences between them.

The model is 1:21 scale to match the Eaglemoss figurines and stands 14.3 cm tall.

This is a pre-order that is due to ship in September.

Scar was one of the deadliest Cylon Raiders. It had gained experience as a result of being killed and resurrected many times, and grew more cunning with each resurrection. Starbuck set out to kill it, but was only able to achieve her mission with help from Kat.

Scar measures approximately 10 inches (25.4 cm) in length.

This version of the Raider was seen in the TV movies Blood & Chrome and Razor. It was the design that was used in the First Cylon War and was an updated version of Ralph McQuarrie's mechanical original, which the production team redesigned to look more advanced.

The model has a wingspan of 7.5 inches (19 cm).

This model shows the U.S.S. Enterprise as it looked during the original Star Trek TV series, when it was under the command of Captain Kirk. The Enterprise was a Constitution-class ship that was famously given the mission “to boldly go where no man has gone before.” It also supported Federation colonies and patrolled the Federation’s borders. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book that includes a profile of the ship with annotated plan views and in-depth information about the production of the original Star Trek, featuring original concept art from the Enterprise’s designer Matt Jefferies and insights from rare production documents that reveal how the show developed.  This is a pre-order that will ship in September 2026 – Star Trek’s 60th anniversary.