When Doctor Who returned in 2005, the team built an entirely new TARDIS. This version was bigger than any of its predecessors and, in fact, bigger than an original London police box. The production team actually made four different versions of the prop but there were no significant differences between them.

The model is 1:21 scale to match the Eaglemoss figurines and stands 14.3 cm tall.

This is a pre-order that is due to ship in September.

This is a full-sized, polyresin replica (15 inches wide) of the dedication plaque for the original series Enterprise. It was on the bridge of the ship just to the right of the turbolift doors.

The plaque was carefully researched by Star Trek scenic artist Mike Okuda who supplied us with detailed drawings that we used to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time an officially licensed full-size version has ever been available.

You may be surprised to see that it identifies the Enterprise as a Starship-class ship. The term Constitution class was used by fans but only became canon in the first season of TNG when it appeared on a computer readout in "The Naked Now".

Scar was one of the deadliest Cylon Raiders. It had gained experience as a result of being killed and resurrected many times, and grew more cunning with each resurrection. Starbuck set out to kill it, but was only able to achieve her mission with help from Kat.

Scar measures approximately 10 inches (25.4 cm) in length.

Master Replicas, Insight Editions and Legendary Entertainment are proud to present the Harkonnen Ornithopter, a highly-detailed die-cast model of the iconic vehicle that menaced the skies of Arrakis in the Dune motion picture franchise produced by Legendary.

Shown in flight mode, with the landing gear up and the weapons deployed, the model boasts an impressive wingspan of just under two feet and measures 10.5 inches from nose to stern. It ships fully-assembled and painted, making for an exceptional display piece.

The Ornithopters make frequent appearances in Frank Herbert’s original Dune novels. The film’s art department developed different versions for House of Atreides and House of Harkonnen, with the Harkonnen versions being heavily armed. The result: a spectacular design that swoops over the Arrakean desert raining terror on the Fremen and anything in the Harkonnens’ path.

LIMITED EDITION • WEBSITE EXCLUSIVE

In ‘The Happiness Patrol’ the Doctor and Ace land on the planet Terra Alpha, where sadness is against the law. In an effort to enforce joy, Helen A’s Happiness Patrol paint the TARDIS pink. After the Doctor helps with the rebellion, normal emotions are restored and the TARDIS is painted blue again.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

This is a pre-order that is due to ship in September.

In the original Battlestar Galactica Muffit was a robotic recreation of Boxey's pet daggit, which was killed during the Cylon attack. Despite being a robot, Muffit had a real personality, occasionally getting into trouble and saving the day.

This is one of the very few BSG statues that Eaglemoss produced. It stands just over 4.25 inches (11 cm) tall.

The original TARDIS prop was modified in “The War Games” and this version was used throughout the Third Doctor’s stories and for the Fourth Doctor's first two seasons. Various repairs were made during this time, most notably, it was given a fresh coat of paint. The original prop was eventually retired in 1976, meaning it had been in service for 13 years.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.9 cm tall.

This is a pre-order that is due to ship in September.

Collectors edition, fully articulated figure of the Second Doctor. Featuring a fully realised likeness of Patrick Troughton, authentically styled costume, highly detailed accessories and display base. Packaged in full-colour display box.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Defiant. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that the Defiant was the first starship in its class and was launched from the Antares ship yards on Stardate 47538.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Deep Space Nine.

This is a preorder that will ship in the fall of 2025.

RARE Eaglemoss 1:10 scale statue from a series of Star Trek: Discovery versions of the Enterprise crew. The first statue in the series shows Spock as portrayed by Ethan Peck, wearing the Discovery version of his Starfleet uniform.

This Eaglemoss series was never released, but a small amount of the stock found its way into the market. The statue measures approximately 8 inches (20 cm) tall.

This version of the Raider was seen in the TV movies Blood & Chrome and Razor. It was the design that was used in the First Cylon War and was an updated version of Ralph McQuarrie's mechanical original, which the production team redesigned to look more advanced.

The model has a wingspan of 7.5 inches (19 cm).

The original version of the TARDIS was modified at the end of the show’s third season. The design of the roof was altered so that it was flatter, and new doors were made with a new lock. This version first appeared in “The War Machines” and was used throughout the Second Doctor’s tenure. It was given a refit before “The War Games”.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

This is a pre-order that is due to ship in September.

This action figure shows Captain William Riker in his Starfleet Uniform, armed with a phaser, as he returns to the bridge of theU.S.S. Enterprisen NCC-1701-D in the third season of Star Trek: Picard

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a phaser rifle. It is part of a new series that features characters from all the modern Star Trek shows.

This is a preorder that will be shipping in the fourth quarter of 2025.

Special Shipping Rate. USA $7.99 (for one or two figures). UK £3.99.

During the Seventh Doctor’s tenure, there were actually three different versions of the TARDIS, all of which were made of fibreglass. They were all cast from the same moulds, but there were differences to do with the frame around the sign at the top and the position of the lock and handles. These TARDIS props had doors on the front and the back. On one side, the door opened on the left; on the other side, it opened on the right.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

This is a pre-order that is due to ship in September.

This beautiful polystone model of the standard Dalek introduced in 2005 stands 197 mm tall.

This is the first in a new line of medium-sized Daleks and is an upgrade on the smaller Daleks Eaglemoss released with a more detailed gun and glass 'ears'. At 1:8.5 scale it is the perfect size to fit on your shelves.

This is the Dalek that started it all: the original version which made its debut in the 1963 episode 'The Dead Planet'. These first Daleks were restricted to their city on Skaro and drew power through the floor, but they were every bit as deadly and evil as the Daleks that followed.

This new model was sculpted by Dalek expert Gavin Rymill and is approximately 7 inches (18 cm) tall. It is made of polystone, has a detailed gun and manipulator arm, both of which are attached by magnets, and in an upgrade on previous models it has transparent 'ears'.

Ships Mid November

The U.S.S. Shenzhou was commanded by Captain Philippa Georgiou. The dedication plaque on the bridge revealed that it was a Walker-class ship that was constructed at the San Francisco Shipyards. The plaque also reveals that its motto was "All existing things are really one."

The Eaglemoss replica plaque is 8.66 inches (22 cm) long by 6.3 inches (16 cm) tall, and is designed for wall or shelf display.

This Art Print Set contains 2 different Giclee Prints

Star Trek 32nd Century Starfleet
Star Trek Discovery NCC-1031-A

Visionary pioneer Gerry Anderson created a world full of captivating characters, spectacular vehicles and exciting stories that are beloved by generations of fans around the world. Now you can create your own miniature adventures with The Anderson Collection.

All your favorite heroes and villains brought to life in a cool retro style. Designed with collectors in mind, each figure sports 5 points of jointed articulation, authentic character likenesses and detailed costumes. Faithfully recreated in 3.75 inch (9.5 cm) scale and packaged in a nostalgic format featuring gorgeous artwork.

Collect all the figures from your favorite shows Thunderbirds, Stingray, Joe 90, Captain Scarlet, UFO, and Space: 1999.

Age restriction 14+