Collectors edition, fully articulated figure of The Master. Featuring a fully realised likeness of Roger Delgado, authentically styled costume, highly detailed accessories and display base. Packaged in full-colour display box.

The U.S.S. Franklin's dedication plaque could be seen on the bridge of the historic ship. The Eaglemoss replica, for wall or shelf display, reveals that the prop used in the movie describes the ship as 'Starship class' and had the motto 'To Boldly Go Where No Man Has Gone Before'.

The Eaglemoss replica is just under 9 inches (22.5 cm) across.

**Previously Sold Out Due To High Demand - Now Shipping**

When Battlestar Galactica returned in 2004, it was with a redesigned ship that cleverly echoed the original. Seen from the side, Eric Chu's design looks radically different but when you spin it around, you see the familiar shapes of the classic version.

In the series, the Galactica is a relic of an earlier age, but its primitive technology allowed it to survive the Cylon attack to become humanity's flagship. The model measures just over 10.5 inches (27 cm) long.

Now Shipping

This action figure shows Captain Christopher Pike as he was when he commanded the U.S.S. Enterprise NCC-1701 in the late 2250s – the era covered by Star Trek: Strange New Worlds. He is wearing the standard captain’s tunic; the gold color indicates that he is in the command division. He comes with a phaser pistol, a phaser rifle, and a communicator. The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

The Cylon Basestars housed the fighters that pursued the Galactica in the original 1978 version of Battlestar Galactica. The ship is a classic that was designed by the legendary artist Ralph McQuarrie.

The model measures just over 6 inches across (15.5 cm) and this special collector's release has been plated in gold and comes in a collectors box.

This edition is limited to 500 pieces and is exclusively available from Master Replicas. 

Captain Riker describes the U.S.S. Zheng He as “the toughest, fastest, most powerful ship Starfleet has ever put into service.” In 2399, it was part of a fleet of Inquiry-class ships that defended the androids on Coppelius from the Romulan Zhat Vash. In 2401, other Inquiry-class ships were sent to confront the Borg when an anomaly appeared on the edge of Federation space and to celebrate Frontier Day. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book. The book includes a profile of the Zheng He, with annotated plan views and in-depth information about the first season of Star Trek: Picard, featuring all-new interviews with makeup supremo Neville Page and storyboard artist Patrick Barrett, and is packed with rare behind-the-scenes photography and original concept art. This is a preorder that will ship in June 2026.

"This is the first in a series of briefing packs that provide a unique insight into Star Trek ships. Jett Reno’s Guide to the U.S.S. Athena is an internal document that was created by the Star Trek: Starfleet Academy art department to provide the writers and directors with essential information about the ship. It includes annotated exterior views, information about the ship’s different modes and its transformation and landing procedures, schematics showing the location of all the key systems including classrooms and dorms, and diagrams of all the key sets. The briefing pack consists of 120 pages and comes in a presentation portfolio."

In the original 1978 show, the Battlestar Galactica was an advanced vessel that led the Colonial fleet. It had a crew of 500 and carried 75 vipers. The ship was designed by concept artist Ralph McQuarrie who started on the new TV show after working on Star Wars. The brief was to create an aircraft carrier and he gave the ship twin pods on outriggers that provided the vipers with a runway they could land on. The model is just over 10.5 inches (27 cm) long.

The Loki was a heavy cruiser that saw service in the First Cylon War. It was designed to carry supplies to combat vessels, but was heavily armed itself with 35 guns. The Loki was created for Battlestar Galactica: Blood & Chrome where it was part of the ghost fleet that was hidden from the Cylons.

The Eaglemoss model is approximately 10.5 inches (27 cm) in length.

This action figure shows Rutherford as he appeared in the early seasons of Star Trek: Lower Decks, when he was an ensign about the U.S.S. Cerritos.

Rutherford had a cybernetic implant that was the result of an accident at Starfleet Academy. He was an engineer who was passionate aboard the U.S.S. Cerritos, and he comes with a model of it along with a toolkit.

The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

This action figure shows Geordi La Forge as he appeared in the third season of Star Trek: Picard, when he was in command of the Starfleet Museum in orbit around Athan Prime. By this point Geordi is a commodore in the engineering division. The figure comes with a phaser and a PADD. The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

The U.S.S. Buran was a 23rd-century Cardenas-class starship that was commanded by Captain Lorca. During the early months of the Federation-Klingon war it was involved in a transporter accident that brought the Mirror version of Lorca to the Prime Universe. Another Cardenas-class ship, the U.S.S. Yeager NCC-1347 fought at the Battle at the Binary Stars. It was disabled by the Klingons and some of the crew members, including Ash Tyler, were captured.  The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book. The book includes a profile of the Buran, with annotated plan views and an in-depth exploration of the creation of Star Trek: Discovery with all-new interviews with costume designer Gersha Phillips, propmaster Mario Moreira, and makeup supremo Neville Page, featuring rare behind-the-scenes photography and original concept art. This is a preorder that will ship in June 2026.

This action figure shows Data as he appeared in the third season of Star Trek: Picard, after his consciousness was retrieved from the Daystrom Institute and implanted in a body created by Dr. Altan Soong.

Data was revived aboard the U.S.S. Titan, where he was given a Starfleet uniform. Since his original body had “died” decades earlier, he does not have any rank insignia.

The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

This is a full-scale polyresin replica of the dedication plaque from the bridge of the U.S.S. Enterprise NCC-1701-D. This is the version that featured in Seasons 5 through 7 of Star Trek: The Next Generation. The plaque was designed by Scenic Art Supervisor Mike Okuda, who gave us the files he originally supplied to Jeff Clare in the Paramount sign shop. We used them to create this version, which is designed to be hung on a wall. At 11.5” x 9” (29 cm by 22.7 cm) this plaque is smaller than the plaques that were designed for Star Trek: Deep Space Nine and Star Trek: Voyager. The plaque comes without the wooden frame that featured on the bridge. The plaque details the date the ship was launched, where it was constructed, and its motto. As an in-joke it features the names of several members of the production team, who are listed as members of the Starfleet team that built the ship.  

The U.S.S. Europa scale model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book that includes a profile of the ship with annotated plan views and in-depth information about the production of Star Trek: Discovery, with a particular focus on the Klingons.

Nimrod-class ships were automated vessels operated by Section 31 in the mid-23rd century. Like other Section 31 vessels, the Nimrod class was fitted with stealth technology and carried a fleet of drone fighters that were embedded in its hull. Several Nimrod class ships were in the armada of ships that battled the U.S.S. Enterprise, the U.S.S. Discovery and a fleet of Klingon and Ba’ul ships near the planet Xahea. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book that includes a profile of the ship with annotated plan views and in-depth history of Section 31 with contributions from their creator Ira Steven Behr, writer Michael Sussman, and concept artist Ryan Dening. The book is packed with production art and storyboards. This is a preorder that will ship in August 2026.

Visionary pioneer Gerry Anderson created a world full of captivating characters, spectacular vehicles and exciting stories that are beloved by generations of fans around the world. Now you can create your own miniature adventures with The Anderson Collection.

All your favorite heroes and villains brought to life in a cool retro style. Designed with collectors in mind, each figure sports 5 points of jointed articulation, authentic character likenesses and detailed costumes. Faithfully recreated in 3.75 inch (9.5 cm) scale and packaged in a nostalgic format featuring gorgeous artwork.

Collect all the figures from your favorite shows Thunderbirds, Stingray, Joe 90, Captain Scarlet, UFO, and Space: 1999.

Age restriction 14+

This action figure shows Dr. Joseph M’Benga as he appeared in the third season of Star Trek: Strange New Worlds, when he was the Chief Medical Officer on the U.S.S. Enterprise NCC-1701 under Captain Pike. M’Benga wears a blue tunic that was only used by medical staff. He comes with a hypospray and a medical tricorder.  The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

This incredible sixth scale statue shows the Fifteenth Doctor as he made his full debut in "The Church on Ruby Road". This Doctor has an irrepressible passion for life, and takes great pleasure in the way he dresses.

The statue is in scale with Eaglemoss's mega statues, and is perfect to be displayed alongside the other Doctors including the Fourth and the Tenth. It was sculpted digitally before being cast in a high quality resin and painted by hand.

The statue stands 12.5 inches (32 cm) tall including the base.