"This action figure shows Captain Christopher Pike as he was when he commanded the U.S.S. Enterprise NCC-1701 in the late 2250s – the era covered by Star Trek: Strange New Worlds. He is wearing the standard captain’s tunic; the gold colour indicates that he is in the command division. He comes with a phaser pistol, a phaser rifle, and a communicator.  The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows."

"In Gerry Anderson’s classic 1970 series UFO, S.H.A.D.O. (Supreme Headquarters of the Alien Defense Organisation) used these all-terrain vehicles to track and intercept UFOs. The cab at the front of each mobile had seating for two, while the cabin at the rear could be used for equipment or even a command post. This stunning die-cast model uses the acclaimed Sixteen 12 tooling and features a radar dish. It is 17 cm (just under 6.75”) long and comes with an all-new forest terrain base. "

RARE Eaglemoss 1:10 scale statue from a series of Star Trek: Discovery versions of the Enterprise crew. The first statue in the series shows Spock as portrayed by Ethan Peck, wearing the Discovery version of his Starfleet uniform.

This Eaglemoss series was never released, but a small amount of the stock found its way into the market. The statue measures approximately 8 inches (20 cm) tall.

Captain Lorca's Cardenas-class U.S.S. Buran — die-cast, with a 48-page collector book.

The 23rd-century Cardenas-class U.S.S. Buran was commanded by Captain Lorca. In the early months of the Federation-Klingon war, a transporter accident brought the Mirror Universe's Lorca into the Prime Universe.

Why you'll love it

• A pivotal Discovery ship — the doorway that crossed universes.
• The 48-page collector book — the creation of Star Trek: Discovery, with all-new interviews with costume designer Gersha Phillips, propmaster Mario Moreira and makeup supremo Neville Page. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

"On Moonbase Alpha the Eagles were launched from a series of landing pads. The Eagle was designed to land in middle of the red cross, where a corridor would connect to the airlock. The door in the Eagle would then connect to the travel car which ferried the crew to and from the rest of Alpha. This collector’s set consists of a landing pad and a standard Eagle transporter, in perfect scale with one another. The lights around the edge of the pad can be illuminated, the docking tube is motorised and the set produces authentic sounds and dialogue from the series. The Eagle itself is 5.5” long while the landing pad measures an impressive 18” (46 cm) across. "

"Explore Destiny like Eli did. This replica Kino is digitally modelled from screen references to capture its intricate mechanical detail, which is one of the trickiest designs in Stargate Universe to reproduce. Eli Wallace (David Blue) found the Kinos aboard the Ancient ship Destiny in Season 1, Episode 2, ""Air, Part 2"". These small floating reconnaissance drones are flown remotely with a Kino remote. The crew used them to film, scout unexplored parts of the ship and check dangerous environments, and they appear throughout the series. Why you'll love it: Digitally modelled from screen references for accuracy Multi-part cast resin with a hand-finished internal ball Metallic-style paint finish that captures the look of Ancient technology 11cm diameter, ideal for any Stargate collection PRE-ORDER: Due to ship December 2026 Specifications: Diameter: 11cm (4.33"") Materials: Multi-part cast resin Hand-finished internal ball Metallic-style paint finish Digitally modelled from screen references Images show an early sample and will be updated when the final sample arrives Pre-order: due to ship December 2026"

"Turn your desk into an LCARS console. This extra-large desk mat features artwork from the U.S.S. Enterprise NCC-1701-D, the Galaxy-class flagship Captain Jean-Luc Picard commanded in Star Trek: The Next Generation. It shows a Class 1 sensor probe as a Master Systems Display (MSD), in the LCARS style seen on every console aboard the Enterprise-D. It sits under your keyboard and mouse, and it's hard to resist tapping the panels as if you were on the bridge yourself. LCARS (Library Computer Access and Retrieval System) is the computer interface used across Starfleet ships, starbases and space stations. Its touch panels could be reconfigured in seconds to suit the task at hand, so even complex tasks took just a few button presses. Why you'll love it: Artwork from the U.S.S. Enterprise NCC-1701-D Class 1 sensor probe shown as an MSD, in authentic TNG-era LCARS style Extra large, big enough for your keyboard and mouse Smooth rubber surface for fast, even mouse movement Stitched edges that won't fray or peel Non-slip back, so it stays where you put it Pairs with our Enterprise-D Ops Station and Stargazer Conn Station desk mats PRE-ORDER: Due to ship December 2026 Specifications: Series: Star Trek: The Next Generation Dimensions: 31.25"" x 10"" (approx. 79cm x 25cm) Surface: rubber, printed design Edges: stitched Backing: non-slip Care: wipe clean with a damp cloth, do not machine wash Pre-order: due to ship December 2026 PLEASE NOTE: This is an art piece intended for display. It is not a toy and is not suitable for anyone under the age of 14."

Visionary pioneer Gerry Anderson created a world full of captivating characters, spectacular vehicles and exciting stories that are beloved by generations of fans around the world. Now you can create your own miniature adventures with The Anderson Collection.

All your favorite heroes and villains brought to life in a cool retro style. Designed with collectors in mind, each figure sports 5 points of jointed articulation, authentic character likenesses and detailed costumes. Faithfully recreated in 3.75 inch (9.5 cm) scale and packaged in a nostalgic format featuring gorgeous artwork.

Collect all the figures from your favorite shows Thunderbirds, Stingray, Joe 90, Captain Scarlet, UFO, and Space: 1999.

Age restriction 14+

 

Our largest Eagle yet, and the only one that comes with booster engines — four separate modules, magnetically attached, exactly as Alan fitted them in “New Adam, New Eve”. It arrives with its own landing pad and a Moon Buggy: a whole corner of Moonbase Alpha, not just the ship. In the second season story, an incredibly powerful being called Magus kidnaps a team from Moonbase Alpha and prevents the Eagles from taking off to rescue them. Alan’s answer is to fit Eagle One with four additional booster engines, significantly increasing its power. This model recreates that ship — one of the most distinctive Eagle configurations the series produced. Specification Length — 30 cm (roughly 12 inches) Tooling — Sixteen 12 Pod — standard detachable pod included Boosters — four side booster rockets, 6 cm each, attach to the transporter pod with a magnetic plate, display with or without Materials — a mix of die-cast and injection-moulded parts Launch platform — included, a section of Alpha landing pad with surface markings and raised perimeter Also included — a Moon Buggy, separate and removable Heritage — an updated version of the 30 cm die-cast Eagle first released in 2004 Availability — pre-order, shipping February 2027

**Previously Sold Out Due To High Demand - Now Shipping**

When Battlestar Galactica returned in 2004, it was with a redesigned ship that cleverly echoed the original. Seen from the side, Eric Chu's design looks radically different but when you spin it around, you see the familiar shapes of the classic version.

In the series, the Galactica is a relic of an earlier age, but its primitive technology allowed it to survive the Cylon attack to become humanity's flagship. The model measures just over 10.5 inches (27 cm) long.

Due to Ship March 2026

The Nimitz-class U.S.S. Europa — die-cast, with a 48-page collector book.

The Nimitz-class U.S.S. Europa was Admiral Brett Anderson's flagship in the early 2250s — 383.3 m long, with four nacelles. It was lost at the Battle at the Binary Stars when a cloaked Klingon cleave ship tore through its hull; Anderson activated the auto-destruct rather than let it be taken.

Why you'll love it

• A rare four-nacelle silhouette — a standout on any shelf.
• The 48-page collector book — the production of Discovery with a focus on the Klingons, featuring Neville Page, Gersha Phillips and Bryan Fuller. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The Cylon Basestars housed the fighters that pursued the Galactica in the original 1978 version of Battlestar Galactica. The ship is a classic that was designed by the legendary artist Ralph McQuarrie.

The model measures just over 6 inches across (15.5 cm) and this special collector's release has been plated in gold and comes in a collectors box.

This edition is limited to 500 pieces and is exclusively available from Master Replicas. 

The Nimrod-class Section 31 vessel — die-cast, with a 48-page collector book.

Nimrod-class ships were automated vessels operated by Section 31 in the mid-23rd century. Fitted with stealth technology and hull-embedded drone fighters, several fought the Enterprise, the Discovery and a combined Klingon and Ba'ul fleet near the planet Xahea.

Why you'll love it

• Stealth tech and hidden drones — a distinctive, secretive design.
• The 48-page collector book — an in-depth history of Section 31 with creator Ira Steven Behr, writer Michael Sussman and concept artist Ryan Dening, packed with production art and storyboards. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

The U.S.S. Shenzhou was commanded by Captain Philippa Georgiou. The dedication plaque on the bridge revealed that it was a Walker-class ship that was constructed at the San Francisco Shipyards. The plaque also reveals that its motto was "All existing things are really one."

The Eaglemoss replica plaque is 8.66 inches (22 cm) long by 6.3 inches (16 cm) tall, and is designed for wall or shelf display.

The U.S.S. Titan-A from Star Trek: Picard — a screen-accurate die-cast model with its own 48-page collector book.

The Titan-A carried Jean-Luc Picard and William Riker through the third and final season of Star Trek: Picard, under Captain Liam Shaw and with Commander Seven of Nine at his side, and survived a last confrontation with the Borg. At the end of her mission she was given a new name and registry — becoming the U.S.S. Enterprise NCC-1701-G.

Why you'll love it

• Straight from Picard's final season — the ship at the centre of the story, and the future Enterprise-G.
• The 48-page collector book — profile, annotated plans and the making of Star Trek: Picard, with behind-the-scenes photography and concept art. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

Build a detailed replica Eagle Transporter from Space 1999 with this fantastic, new brick building set. The Eagles were the transport vehicles on Moonbase Alpha. They were designed by Brian Johnson, who also worked on “2001: A Space Odyssey”, and are among the most memorable spaceships in science-fiction history.

This official construction set features an impressive 2500 pieces. When finished, the highly detailed Eagle is 51.4 cm long and 22.1 cm wide. It has a detachable habitation pod, with a removable roof so you can access the fully-detailed interior . The model is officially licensed by ITV Studio and comes with custom decals straight from the show.

Hero Build is a new construction system that is compatible with all the major block building brands. It’s built to the highest standards for seamless integration. The Hero Build bricks can be used for any number of projects, but Master Replicas is issuing a series of officially licensed sets focusing on some of the world’s most beloved TV and movie properties.

Doctor Who Battles in Time returns with an all-new Obliterator trading card collection celebrating the incredible history of Doctor Who — through to the Fifteenth Doctor! Doctor Who Battles in Time: Obliterator is being released in two editions. Every card in this Unlimited Retail Edition features a silver foil Obliterator logo on every card. This sealed box contains 36 randomly sorted packs. Each individual pack contains 6 cards, featuring high-spec UV glossed base cards, stunning rainbow foil enhanced rares, premium holofoil super rares, and incredible all-new metallic technology featured on the ultra-chase Vortex Rare cards.

Collectors edition, fully articulated figure of The Master. Featuring a fully realised likeness of Roger Delgado, authentically styled costume, highly detailed accessories and display base. Packaged in full-colour display box.