The Expanse collection was launched in the last days of Eaglemoss and had only limited distribution. The first model was an XL version of the series' main ship — the Rocinante, a Martian corvette that ended up under the charge of James Holden.

The Eaglemoss model measures 12.8 inches (32.5 cm) long and comes in its original box.

More stock on the way - Expected March 2025

The Moopsy is one of the cuddliest creatures in the Galaxy but watch out — this little ball of cuteness is an alien murderer that will drink your bones.

Moopsy is a fan-favourite alien from Star Trek: Lower Decks. It looks friendly but it can move at lightning-fast speeds and, once it sinks its fangs into its prey, it can drink its bones in seconds.

When it escaped from Narj's Miraculous Menagerarium it killed Narj and two Pyrithian swamp gobblers before Ransom and Mariner lured it back into it's cage. Handle with care!

Size: 10 inches x 5.5 inches (25 cm x 14 cm)

This is a replica of the original stargate from Stargate SG-1, also known as the Alpha Gate. The gates were developed over 50 million years ago by the Ancients and can be used to open wormholes between different planets and even different galaxies. The Ancients called them Astria Porta and seeded them throughout the Pegasus and Milky Way galaxies. When the Goa'uld took control of them they called them Chappa'ai, which Daniel Jackson translated as "stargate".

The gate used by SG-1 was buried by the ancient Egyptians after they overthrew the Goa'uld Ra. It was uncovered in 1928 and was eventually powered up at a secret facility in Cheyenne Mountain. It has nine chevrons and 39 glyphs that can be used to dial the address of thousands of inhabited planets.

The model is made of a high quality polystone, which holds the detail exceptionally well. The gate itself has a diameter of 9.25 inches (23.5 cm). It is an individual piece that can be slotted into the display stand, which bears the SG-1 symbol from the planet Earth.

The F-302 fighter interceptor was Earth's first fighter designed to operate in space. It was developed using alien technology that was acquired through the use of the stargates, and was armed with railguns and guided missiles. It had a hyperdrive and could make interstellar journeys.

Length: 4 inches (10 cm); Width: 8 inches (20 cm)

The Koto was an MCRN patrol destroyer that was illegally sold to Marco Inaros and became part of the Free Navy. It was one of several ships that attacked the Rocinante in the episode 'Hard Vacuum', when it was disabled by an attack from Drummer's ship.

The Koto was designed by Ryan Dening, who also designed many ships for Star Trek.

It was produced but never sold by Eaglemoss and we have acquired all the stock. Length approximately 9 inches (22 cm).

When Battlestar Galactica returned in 2004, it was with a redesigned ship that cleverly echoed the original. Seen from the side, Eric Chu's design looks radically different, but when turned around, the familiar shapes of the classic version are evident in the design.

In the series, the Galactica is a relic of an earlier age, but its primitive technology allowed it to survive the Cylon attack to become humanity's flagship.

The model measures just over 10.5 inches (27 cm) long.

This is a replica of the Pegasus gate from Stargate Atlantis. It was discovered in the city of Atlantis after Daniel Jackson realised that, if they had enough power, the stargates could be used to travel between galaxies.

The Atlantis Gate was an upgrade on the SG-1 version. On the show its glyphs appeared digitally, as the crew dialed into a new location. The gate had been left unused for thousands of years after the Ancients fled to the Milky Way after losing their battle with the Wraith, but was revived by the Pegasus team.

The replica gate is made of polystone and comes with a separate display base that carries the Stargate Atlantis logo. Master Replicas has carefully reproduced every glyph on the gate, which was based on a digital model that was supplied by MGM.

The model measures 9.25 inches (23.5 cm) across.

Shipping From: January 2025

The Puddle Jumpers were Ancient ships that were used to fly through the Stargates to different locations in the Pegasus Galaxy. The Master Replicas model is based on the original VFX files that were used on Stargate Atlantis.

The model itself is just under 6 inches (15 cm) long.

Shipping From April 2025

Note: This Is A Pre Order Shipping From Early May

Bilskirnir is Thor’s ship, which made its debut in the Stargate SG-1 season 2 episode ‘Thor’s Chariot’, when it saved SG-1 from the Goa’uld. Bilskirnir was an incredibly powerful Asgard mothership with advanced transporter systems, engines that could cover intergalactic distances in hours, and an ion gun that could obliterate a Goa’uld Hat’tak ship.

In Norse mythology 'Bilskirnir' refers to Thor’s hall, where he lived with his wife Sif and their children.

The Master Replicas die-cast model is 7.5 inches (19 cm) long and is based on the original VFX model, which was supplied to us by the production team.

The Razorback started life as Julie Mao's racing ship. Avasarala and Bobbie use it to escape from the Guanshiyin before Bobbie ends up owning it. She uses it to investigate the missing Martian ships, which she discovers have been sold to the Free Navy.

The Eaglemoss model is 7.25 inches (18.5 cm) long.

The original Viper is a maneuverable, one-man fighter that was one of the signature models of the original Battlestar Galactica. It was designed by legendary concept artist Ralph McQuarrie, who had recently finished work on Star Wars. The shooting models were beautifully made and rapidly became iconic.

The Eaglemoss model was one of the most popular the company produced. It measures 10.6 inches (27 cm) long.

The ships in The Expanse rely on an Epstein drive to reach the kinds of speed that make interplanetary travel practical. The drive was first tested on a second-hand yacht, and was discovered almost by accident.

This is one of the last models that Eaglemoss produced and we have them all.

Yacht length: 6 inches (16 cm); width: 4.7 inches (12 cm); height: 4.3 inches (11 cm).

UN One (also designated UN-1) from The Expanse was a short-range craft that was used by the President of the United Nations. It could be carried aboard a larger ship to make interplanetary journeys.

Avasarala used it on a diplomatic mission to Mars. It was destroyed during the asteroid attack on Earth, when a shockwave tore it apart, killing Nancy Gao.

This is one of Eaglemoss's rare Expanse ships and was only produced in limited quantities.

The model is approximately 6 inches (15cm) long.

Welcome to the launch of the Master Replicas Collectors Club

Membership Packs will be posted to shipping address provided at the time of order - please bear that in mind if ordering as a gift!

Our aim as always is to bring you, the fan, the opportunity to purchase items that you won’t be offered elsewhere. 

As a member you will receive the following perks : 

10% off all items until December 31^st, 2024 (in conjunction with all other offers).

 24hrs MEMBER-ONLY Early Access to all NEW products, including limited-edition and signed items.

 Exclusive Access to 6 Live Online Events with live interviews of guests behind and in front of the camera, showrunners and stars! These will be exclusive interviews with the opportunity for members to ask questions and engage in conversation. MEMBERS-ONLY. More details about guests will be released shortly.

 MEMBER-ONLY Access to a number of exclusive ships launching in 2024. These will be at our discretion and could include Star Trek, Dr Who, Foundation, Stargate, Orville, Expanse, and new as yet unannounced licenses. 

We are happy to announce as part of the exclusives available for MEMBERS-ONLY in 2024 will include: 

The Hammond from ‘Stargate’ (Now sold out)

The Tachi from ‘The Expanse’

The Fourth Doctor’s TARDIS

 We are allowing more than one membership per household as we know many fans live together, and you may buy more than one membership per name. 

Full terms can be found Here

 

The Daedalus was the first BC-304 interstellar battleship that was produced by Earth. It was armed with railguns and tactical warheads and carried a wing of F-302 fighters.

It was also the first Stargate ship that was produced by Eaglemoss. The initial run sold out quickly. A second wave was made but Eaglemoss's difficulties meant that it wasn't shipped. It has been changing hands on ebay for incredible prices.

The ship measures 8.85 inches (22.5 cm) long.

The XL USS Orville from Seth McFarlane's sci-fi series.

Eaglemoss only released a limited number of ships from the series, and this is the XL version of the hero ship.

The model is approximately 10.25 inches (26 cm) long.

Drink like a Starfleet officer with these exclusive mugs straight from the 25th century.

These brushed steel mugs would look right at home in Starfleet. Each one features the logo of a different division: Starfleet Academy in San Francisco, where generations of Starfleet officers have been trained; the Galaxy Class Starship Design Project, which was responsible for designing and building the U.S.S. Enterprise NCC-701-D; and Starfleet Headquarters itself.

The mugs were designed and created by Eaglemoss and are limited edition; exclusively available through MasterReplicas.com.

The mugs are 500ml / 17oz.

This model, from Battlestar Galactica: Blood & Chrome shows the Galactica in its prime during the First Cylon War, when it had more gun turrets and heavier armor plating.

The Eaglemoss model is just over 10.5 inches (27 cm) long.

Destroyers were a pivotal part of the Krill military. A destroyer engaged enemy ships in direct combat, and its bombing capabilities made the ship the ideal choice to attack colony planets from space.

Yet destroyers were more than simple attack ships: the Krill designed them to host entire families, providing living arrangements, religious sanctuaries, and classrooms for children.

The model is approximately 8.66 inches (22 cm) long.

RARE SITE EXCLUSIVE The Kaylon Interceptor from The Orville is the smaller ship with a 'tail' that was carried inside the Kaylon sphere.

The model is just under 7 inches (17.5 cm) long.