This is a replica of the gate that was found on the Destiny in Stargate Universe. This gate was more primitive than the versions found in the Milky Way Galaxy and had a much shorter range. The glyphs on this gate lit up as they were dialled, and the model shows the address for Earth. The gate had been left unused for thousands of years after the crew left the Destiny, but was revived by the team from Earth, who used it to gather supplies and explore the universe. The replica gate measures 9.25 inches (23.5 cm) across. It is made of polystone and comes with a separate display base that carries the SGU logo. Master Replicas has carefully reproduced every glyph on the gate, which was based on a digital model that was supplied by MGM. This is a preorder that is due to ship in February 2026.

This is Master Replicas first ever Doctor Who ship: the Dalek saucer from 2005's 'The Parting of the Ways'. This impressive polyresin model is 21 cm across and was sculpted by Dalek expert Gavin Rymill. The Daleks used saucers with a similar design in the TV Century 21 Dalek comic strip, but in the 1960s TV budgets didn't stretch to expensive spaceship models. The classic Dalek ship only made its debut in 2005 when a massive fleet of Dalek ships prepared to invade Earth. The ship was made as a 3D CG model by the Mill. Master Replicas recruited Dalek expert Gavin Rymill to recreate the ships using renders made at the time and careful study of the episodes. 

When Doctor Who returned in 2005, the team built an entirely new TARDIS. This version was bigger than any of its predecessors and, in fact, bigger than an original London police box. The production team actually made four different versions of the prop but there were no significant differences between them.

The model is 1:21 scale to match the Eaglemoss figurines and stands 14.3 cm tall.

LIMITED EDITION • WEBSITE EXCLUSIVE

In ‘The Happiness Patrol’ the Doctor and Ace land on the planet Terra Alpha, where sadness is against the law. In an effort to enforce joy, Helen A’s Happiness Patrol paint the TARDIS pink. After the Doctor helps with the rebellion, normal emotions are restored and the TARDIS is painted blue again.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

The original TARDIS prop was modified in “The War Games” and this version was used throughout the Third Doctor’s stories and for the Fourth Doctor's first two seasons. Various repairs were made during this time, most notably, it was given a fresh coat of paint. The original prop was eventually retired in 1976, meaning it had been in service for 13 years.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.9 cm tall.

The U.S.S. Rubidoux from Lower Decks — a limited-edition die-cast with a 48-page collector book.

The California-class U.S.S. Rubidoux was commanded by Captain Dayton. In 2380 it met an entity that fed on its power until it absorbed the whole ship; Dayton and her crew were beamed to safety by the U.S.S. Cerritos moments before the entity merged with the Rubidoux.

Why you'll love it

• Limited edition — only 500 pieces, in command-division red.
• The 48-page collector book — the shared California-class book on the Cerritos and the making of Lower Decks (Mike McMahan interview). More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

This is a light-up replica of the Master Systems Display (MSD) on the Galaxy-class U.S.S. Enterprise NCC-1701-D — the famous cutaway of the ship that appeared throughout Star Trek: The Next Generation. This upgraded version of the artwork was created by Geoff Mandel, who is a veteran of the Star Trek art department.

The artwork is visible when the power isn’t on, but comes to life when you push the button on the side. It works in a very similar way to the real displays used on the show, with backlit film.

"This action figure shows D’Vana Tendi when she was an ensign aboard the U.S.S. Cerritos in the early 2380s. The Cerritos was her first posting after she graduated from Starfleet Academy and she started her career in sickbay before she was assigned to the senior science officer training program. Tendi’s green skin is typical of Orions. She comes with a phaser and a tricorder.  The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows."

The original version of the TARDIS was modified at the end of the show’s third season. The design of the roof was altered so that it was flatter, and new doors were made with a new lock. This version first appeared in “The War Machines” and was used throughout the Second Doctor’s tenure. It was given a refit before “The War Games”.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

This beautiful polystone model of the standard Dalek introduced in 2005 stands 197 mm tall.

This is the first in a new line of medium-sized Daleks and is an upgrade on the smaller Daleks Eaglemoss released with a more detailed gun and glass 'ears'. At 1:8.5 scale it is the perfect size to fit on your shelves.

This is the first in a new line of detailed Stargate desktop replicas, reproducing some of the most iconic props from the classic TV series. This is a beautifully detailed replica of the helmet worn by Apophis’s Serpent Guard. As befits the Serpent god, the helmet is designed to look like a cobra. The Serpent Guard was made up of Apophis’s most trusted Jaffa and for centuries they were dedicated to serving him. That began to change when Apophis’s First Prime, Teal’c, turned on him and joined SG-1. The replica helmet was digitally sculpted, based on careful study of the original props. It has been cast in polyresin to ensure a high level of accuracy, before being painted. The helmet is the perfect size to sit on a desk or shelf and is just under 6” (15 cm) tall when displayed on its bespoke stand.

The Ma’tok staff (commonly known as a staff weapon) was the Jaffa’s weapon of choice. It is designed to fire bolts of plasma, with a range of 50-60 meters. The intensity of the blasts, which are powered by a Naquadah generator, can be adjusted so it can stun a human or blast through rock. At close quarters they were often used as a conventional staff weapon. The full-size staff was 6’ 6” (2 m) tall. The desktop replica was digitally sculpted with careful reference to the original props. It  is 12” (30 cm) long and comes with a stand that can be used to display it vertically or horizontal. Prototype images, Final Staff will be diecast for strength and hand finished.

This incredibly detailed polyresin model recreates Ra's Pyramid from the Stargate movie. This is a real statement piece that measures an impressive 12 inches (30 cm) across and stands over 8 inches (20 cm) tall.

In the movie, Daniel Jackson (played by James Spader) discovers that the ancient Egyptians were enslaved by a race of powerful aliens, known as the Goa'uld System Lords. Their ships were shaped like giant pyramids that open up to launch waves of airborne fighters.

Our model of the Pyramid was sculpted by Ed Giddings with careful reference to the original model that was used to film the visual effects in the movie. Even the individual hieroglyphs have been reproduced in relief.

“The toughest, fastest, most powerful ship Starfleet has ever put into service.” — Captain Riker

In 2399 the Inquiry-class U.S.S. Zheng He was part of the fleet that defended the androids on Coppelius from the Romulan Zhat Vash. In 2401, Inquiry-class ships confronted the Borg when an anomaly appeared at the edge of Federation space, and joined the Frontier Day celebrations.

Why you'll love it

• A hero ship of Picard — from the Coppelius stand to Frontier Day.
• The 48-page collector book — the making of Star Trek: Picard season one, with all-new interviews with makeup supremo Neville Page and storyboard artist Patrick Barrett, plus rare behind-the-scenes photography and concept art. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

"This action figure shows Captain Christopher Pike as he was when he commanded the U.S.S. Enterprise NCC-1701 in the late 2250s – the era covered by Star Trek: Strange New Worlds. He is wearing the standard captain’s tunic; the gold colour indicates that he is in the command division. He comes with a phaser pistol, a phaser rifle, and a communicator.  The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows."

This action figure shows Rutherford as he appeared in the early seasons of Star Trek: Lower Decks, when he was an ensign aboard the U.S.S. Cerritos.

Rutherford had a cybernetic implant that was the result of an accident at Starfleet Academy. He was an engineer who was passionate about the U.S.S. Cerritos, and he comes with a model of it along with a toolkit.

The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

The VIP Eagle brought Commissioner Simmonds to Moonbase Alpha, after John Koenig discovered dangerous levels of magnetic activity. When the Alphans tried to disperse the radioactive waste that was causing the problem, Alan Carter took the VIP Eagle in to lunar orbit and was onboard when he witnessed the explosion that threw the moon out of Earth’s orbit. Unlike the standard Eagles, the VIP Eagle has a distinctive orange pod. These stunning models are based on the acclaimed Sixteen 12 tooling. This model of the VIP Eagle Transporter is 5.5 inches (13 cm) long and has a detachable pod. It is a similar size to Master Replicas’ Starship Library series.

"On Moonbase Alpha the Eagles were launched from a series of landing pads. The Eagle was designed to land in middle of the red cross, where a corridor would connect to the airlock. The door in the Eagle would then connect to the travel car which ferried the crew to and from the rest of Alpha. This collector’s set consists of a landing pad and a standard Eagle transporter, in perfect scale with one another. The lights around the edge of the pad can be illuminated, the docking tube is motorised and the set produces authentic sounds and dialogue from the series. The Eagle itself is 5.5” long while the landing pad measures an impressive 18” (46 cm) across. "

This action figure shows Geordi La Forge as he appeared in the third season of Star Trek: Picard, when he was in command of the Starfleet Museum in orbit around Athan Prime. By this point Geordi is a commodore in the engineering division. The figure comes with a phaser and a PADD. The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

This action figure shows Data as he appeared in the third season of Star Trek: Picard, after his consciousness was retrieved from the Daystrom Institute and implanted in a body created by Dr. Altan Soong.

Data was revived aboard the U.S.S. Titan, where he was given a Starfleet uniform. Since his original body had “died” decades earlier, he does not have any rank insignia.

The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.