Collectors edition, fully articulated figure of the Second Doctor. Featuring a fully realised likeness of Patrick Troughton, authentically styled costume, highly detailed accessories and display base. Packaged in full-colour display box.

The U.S.S. Voyager is one of the most famous ships in Starfleet history. In 2371, it was transported 70,000 light years across the Galaxy by a being known as The Caretaker. Using conventional methods, the journey home from the Delta Quadrant should have taken at least 70 years, but under the command of Captain Janeway, Voyager managed it in seven. Along the way it discovered many new species and survived several encounters with the Borg.  The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book that includes a profile of the ship with annotated plan views and in-depth information about the production of Star Trek: Voyager based on extensive interviews with the show’s creators.  The book features rare behind-the-scenes photography and production art. This is a pre-order that will ship in September 2026 – Star Trek’s 60th anniversary.

LIMITED EDITION • ONLY 500 PIECES The U.S.S. Rubidoux was a California-class starship that was commanded by Captain Dayton. In 2380 it encountered an entity that fed on its power systems until it had absorbed the entire ship. Dayton and her crew were rescued by a team from the U.S.S. Cerritos, who beamed them away before the entity merged with the Rubidoux. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book. It is one of several limited-edition California-class ships that Master Replicas are producing. Its red markings show that it belongs to the command division. All the California-class variants come with an in-depth book that includes a profile of the U.S.S. Cerritos, with annotated plan views and information about the creation of Star Trek: Lower Decks, based on an exclusive interview with the show’s creator Mike McMahan. The Rubidoux is being produced in a limited edition of 500 pieces. This is a preorder that will ship in July 2026.

The Sovereign-class U.S.S. Enterprise NCC-1701-E entered service in 2372, following the destruction of the U.S.S. Enterprise NCC-1701-D. Like its predecessor, it was commanded by Captain Jean-Luc Picard.  In 2373, it led the fleet that destroyed the Borg cube that attacked Earth. In 2375, it exposed a conspiracy to exploit the Ba’ku people. Then in 2379, it defeated the Romulan Preator Shinzon, when he mounted an attack on Earth and the Federation using a deadly thallaron weapon. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book that includes a profile of the ship with annotated plan views and in-depth information about the production of the Star Trek: The Next Generation movies based on extensive interviews with the show’s creators.  The book features rare behind-the-scenes photography and production art.

"The U.S.S. Defiant NCC-74205 was Starfleet’s first true warship. It was originally developed to counter the threat from the Borg, but it was considered to be overpowered and unstable, so the project was abandoned. It was revived after Benjamin Sisko made first contact with the Dominion and realized how dangerous they were. The Defiant was assigned to Deep Space 9 and, thanks to an agreement with the Romulans, it was fitted with a cloaking device. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book that includes a profile of the ship with annotated plan views and in-depth information about the design of the Defiant and the creation of the Dominion. The book features in-depth interviews with Star Trek: Deep Space Nine’s creators and rare behind-the-scenes photography and production art."

This action figure shows D’Vana Tendi when she was an ensign aboard the U.S.S. Cerritos in the early 2380s. The Cerritos was her first posting after she graduated from Starfleet Academy and she started her career in sickbay before she was assigned to the senior science officer training program. Tendi’s green skin is typical of Orions. She comes with a phaser and a tricorder. The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

"This is a light-up replica of the Master Systems Display (MSD) for a Constitution-class Starship, like Captain Kirk’s U.S.S. Enterprise NCC-1701. It was created for the Star Trek: Enterprise story ""In A Mirror Darkly,"" when we discovered that the one of the Enterprise’s sister ships, the U.S.S. Defiant from the original series, had been sent to the Mirror Universe. Concept artist Doug Drexler created the artwork as if it were for the original Enterprise. He was inspired by the kind of graphics that were used on the original show and it shows several familiar locations including the bridge, sickbay, the briefing room and main engineering. The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth. The light panel is 31.5"" (80 cm) long and 10.25"" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film."

"LIMITED EDITION • ONLY 500 PIECES The U.S.S. Merced was a California-class starship that was transformed in a terraforming accident in 2381. While it was under the command of Captain Durango, the Merced was assigned to work with the U.S.S. Cerritos to recover an ancient generation ship. Durango’s desire to take command led to both ships being “infected” with a terraforming fluid. The Cerritos managed to reverse the effects, but the Merced was badly damaged. Luckily, its crew were beamed on to a safe area of the generation ship. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book. It is one of several limited-edition California-class ships that Master Replicas are producing. Its blue markings show that it belongs to the science division. All the California-class variants come with an in-depth book that includes a profile of the U.S.S. Cerritos, with annotated plan views and information about the creation of Star Trek: Lower Decks, based on an exclusive interview with the show’s creator Mike McMahan. The Merced is being produced in a limited edition of 500 pieces."

Collectors edition, fully articulated figure of The Master. Featuring a fully realised likeness of Roger Delgado, authentically styled costume, highly detailed accessories and display base. Packaged in full-colour display box.

This action figure shows Captain Christopher Pike as he was when he commanded the U.S.S. Enterprise NCC-1701 in the late 2250s – the era covered by Star Trek: Strange New Worlds. He is wearing the standard captain’s tunic; the gold color indicates that he is in the command division. He comes with a phaser pistol, a phaser rifle, and a communicator. The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

"This is the first in a series of briefing packs that provide a unique insight into Star Trek ships. Jett Reno’s Guide to the U.S.S. Athena is an internal document that was created by the Star Trek: Starfleet Academy art department to provide the writers and directors with essential information about the ship. It includes annotated exterior views, information about the ship’s different modes and its transformation and landing procedures, schematics showing the location of all the key systems including classrooms and dorms, and diagrams of all the key sets. The briefing pack consists of 120 pages and comes in a presentation portfolio."

Captain Riker describes the U.S.S. Zheng He as “the toughest, fastest, most powerful ship Starfleet has ever put into service.” In 2399, it was part of a fleet of Inquiry-class ships that defended the androids on Coppelius from the Romulan Zhat Vash. In 2401, other Inquiry-class ships were sent to confront the Borg when an anomaly appeared on the edge of Federation space and to celebrate Frontier Day. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book. The book includes a profile of the Zheng He, with annotated plan views and in-depth information about the first season of Star Trek: Picard, featuring all-new interviews with makeup supremo Neville Page and storyboard artist Patrick Barrett, and is packed with rare behind-the-scenes photography and original concept art. This is a preorder that will ship in June 2026.

This action figure shows Rutherford as he appeared in the early seasons of Star Trek: Lower Decks, when he was an ensign about the U.S.S. Cerritos.

Rutherford had a cybernetic implant that was the result of an accident at Starfleet Academy. He was an engineer who was passionate aboard the U.S.S. Cerritos, and he comes with a model of it along with a toolkit.

The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

This action figure shows Geordi La Forge as he appeared in the third season of Star Trek: Picard, when he was in command of the Starfleet Museum in orbit around Athan Prime. By this point Geordi is a commodore in the engineering division. The figure comes with a phaser and a PADD. The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

This action figure shows Data as he appeared in the third season of Star Trek: Picard, after his consciousness was retrieved from the Daystrom Institute and implanted in a body created by Dr. Altan Soong.

Data was revived aboard the U.S.S. Titan, where he was given a Starfleet uniform. Since his original body had “died” decades earlier, he does not have any rank insignia.

The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

The U.S.S. Buran was a 23rd-century Cardenas-class starship that was commanded by Captain Lorca. During the early months of the Federation-Klingon war it was involved in a transporter accident that brought the Mirror version of Lorca to the Prime Universe. Another Cardenas-class ship, the U.S.S. Yeager NCC-1347 fought at the Battle at the Binary Stars. It was disabled by the Klingons and some of the crew members, including Ash Tyler, were captured.  The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book. The book includes a profile of the Buran, with annotated plan views and an in-depth exploration of the creation of Star Trek: Discovery with all-new interviews with costume designer Gersha Phillips, propmaster Mario Moreira, and makeup supremo Neville Page, featuring rare behind-the-scenes photography and original concept art. This is a preorder that will ship in June 2026.

This action figure shows Dr. Joseph M’Benga as he appeared in the third season of Star Trek: Strange New Worlds, when he was the Chief Medical Officer on the U.S.S. Enterprise NCC-1701 under Captain Pike. M’Benga wears a blue tunic that was only used by medical staff. He comes with a hypospray and a medical tricorder.  The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

Nimrod-class ships were automated vessels operated by Section 31 in the mid-23rd century. Like other Section 31 vessels, the Nimrod class was fitted with stealth technology and carried a fleet of drone fighters that were embedded in its hull. Several Nimrod class ships were in the armada of ships that battled the U.S.S. Enterprise, the U.S.S. Discovery and a fleet of Klingon and Ba’ul ships near the planet Xahea. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book that includes a profile of the ship with annotated plan views and in-depth history of Section 31 with contributions from their creator Ira Steven Behr, writer Michael Sussman, and concept artist Ryan Dening. The book is packed with production art and storyboards. This is a preorder that will ship in August 2026.

The U.S.S. Europa scale model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book that includes a profile of the ship with annotated plan views and in-depth information about the production of Star Trek: Discovery, with a particular focus on the Klingons.