This action figure shows Geordi La Forge as he appeared in the third season of Star Trek: Picard, when he was in command of the Starfleet Museum in orbit around Athan Prime. By this point Geordi is a commodore in the engineering division. The figure comes with a phaser and a PADD. The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

This action figure shows Data as he appeared in the third season of Star Trek: Picard, after his consciousness was retrieved from the Daystrom Institute and implanted in a body created by Dr. Altan Soong.

Data was revived aboard the U.S.S. Titan, where he was given a Starfleet uniform. Since his original body had “died” decades earlier, he does not have any rank insignia.

The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

"In Gerry Anderson’s UFO the interceptors were one-man fighters that were S.H.A.D.O.’s first line of defense against the alien UFOs. They were based on the moon and typically operated in groups of three. Each Interceptor carried a nuclear missile, which the three fighters fired simultaneously to create a wide area of destruction. They were designed to operate in space rather in the Earth’s atmosphere. The die-cast model measures 7” (18 cm) from top to stern, and is based on the acclaimed Sixteen 12 tooling. "

This action figure shows Dr. Joseph M’Benga as he appeared in the third season of Star Trek: Strange New Worlds, when he was the Chief Medical Officer on the U.S.S. Enterprise NCC-1701 under Captain Pike. M’Benga wears a blue tunic that was only used by medical staff. He comes with a hypospray and a medical tricorder.  The figure is 4.5 inches (11.4 cm) tall. It is part of a new series that features characters from all the modern Star Trek shows.

Nine chevrons from home, and your desk finally looks the part. This extra-large desk mat puts the Ancient starship Destiny across your workspace - hull schematics, systems readouts and glowing Ancient interface panels, printed edge to edge in that unmistakable deep-space blue. It sits under your keyboard and your mouse, so the whole setup reads as one console. Why you'll want one: * Full Destiny schematic - the ship rendered as a technical blueprint, with plan, profile and detail views, exactly as the Ancients would have logged her * Ancient interface design - dials, gauges, status blocks and Ancient numerals, inspired by the control interfaces of Stargate Universe * Extra large: 31.25"" x 11.5"" - covers keyboard, mouse and the mug you shouldn't have put there * Smooth, fast mousing surface - consistent glide for work or gaming, with no snagging at the edges * Stitched edges - won't fray or peel at the corners, however hard you type * Non-slip rubber back - stays exactly where you put it, all day * Sharp, saturated print - the fine schematic linework and Ancient text stay crisp, not muddy Most Stargate collectibles live on a shelf. This one you actually use - every day, for hours, under your hands. It's the quiet kind of fandom: nobody on the video call spots it, but you know what you're flying. A proper piece of Stargate on your desk for less than the price of a boxset! A genuinely good gift for the Stargate fan who already owns the Puddle Jumper and the ZPM, and an easy first buy for anyone building a Stargate desk setup. Specifications: Dimensions: 31.25"" x 11.5"" (approx. 79cm x 29cm) Surface: Rubber, printed design Edges: Stitched Backing: Non-slip Use: Desk mat, mouse pad, keyboard mat, looking good Care: Wipe clean with a damp cloth. Do not machine wash. This is an art piece intended for display and use. It is not a toy and is not suitable for anyone under the age of 14."

"In Gerry Anderson’s classic 1970 series UFO, S.H.A.D.O. (Supreme Headquarters of the Alien Defense Organisation) used these all-terrain vehicles to track and intercept UFOs. The cab at the front of each mobile had seating for two, while the cabin at the rear could be used for equipment or even a command post. This stunning die-cast model uses the acclaimed Sixteen 12 tooling and features a radar dish. It is 17 cm (just under 6.75”) long and comes with an all-new forest terrain base. "

Build a detailed replica Eagle Transporter from Space 1999 with this fantastic, new brick building set. The Eagles were the transport vehicles on Moonbase Alpha. They were designed by Brian Johnson, who also worked on “2001: A Space Odyssey”, and are among the most memorable spaceships in science-fiction history.

This official construction set features an impressive 2500 pieces. When finished, the highly detailed Eagle is 51.4 cm long and 22.1 cm wide. It has a detachable habitation pod, with a removable roof so you can access the fully-detailed interior . The model is officially licensed by ITV Studio and comes with custom decals straight from the show.

Hero Build is a new construction system that is compatible with all the major block building brands. It’s built to the highest standards for seamless integration. The Hero Build bricks can be used for any number of projects, but Master Replicas is issuing a series of officially licensed sets focusing on some of the world’s most beloved TV and movie properties.

The Starship Destiny was built by the Ancients and launched more than fifty million years ago. Its role: to seed stargates and investigate a mysterious message hidden in the fabric of the universe. What happened to the ship and her crew is a mystery. The arrival of an expedition from Earth, who activated the the ship’s stargate in 2009, provided the Destiny with a new crew — and a new mission.

The model is made of die-cast and measures 8.75 inches (22 cm) from front to back.

"OUR BIGGEST LIGHT-UP PANEL YET 80 × 45 cm of screen-accurate starship, backlit at the touch of a button. This is a light-up replica of the Master Systems Display for the U.S.S. Cerritos, the California-class starship at the heart of Star Trek: Lower Decks — using the artwork created for the show by legendary Star Trek scenic artist Mike Okuda. Switched off, it’s a striking piece of Star Trek art. Switched on, it glows to life just like the displays on screen. Why you’ll love it • Our biggest panel yet — a commanding 80 × 45 cm (31.5"" × 17.7"") statement piece for any wall. The U.S.S. Cerrritos MSD is the same width as the other MSDs in the collection and is designed to be displayed alongside them. • Backlit film technology — press the button and the ship’s systems glow to life, using the same technology as Star Trek: The Next Generation. • Incredible artwork — spectacular switched on, and a striking piece of art when switched off, with high-resolution detailed artwork you can study in depth. • Densely labelled, screen-used artwork — created by Mike Okuda for the TV show. The MSD shows detailed ship schematics showing the ship from starboard, above, front and back with the key systems called out: warp core, impulse reactors, shuttlebay, phaser arrays and navigational deflector. • Easter Eggs – the MSD is packed with detail including the location of Cetacean Ops and the highly-classified Rubber Ducky room. • Collector-grade and officially licensed — built to the exacting Master Replicas standard as an official Star Trek: Lower Decks collectible. • Plug in and go — ready to hang on a wall or stand on a shelf. Specifications • Dimensions: 31.5"" × 17.7"" (80 × 45 cm) • Illumination: backlit film, one-button on / off • In the box: USB-C cable included (mains USB plug not included) • Mounting: wall-mountable or freestanding • Licence: officially licensed Star Trek: Lower Decks collectible by Master Replicas

Prove you’re the ultimate Lower Decks fan! Answer hundreds of trivia questions, choose your rank, challenge friends, and earn your promotion.

The U.S.S. Titan-A from Star Trek: Picard — a screen-accurate die-cast model with its own 48-page collector book.

The Titan-A carried Jean-Luc Picard and William Riker through the third and final season of Star Trek: Picard, under Captain Liam Shaw and with Commander Seven of Nine at his side, and survived a last confrontation with the Borg. At the end of her mission she was given a new name and registry — becoming the U.S.S. Enterprise NCC-1701-G.

Why you'll love it

• Straight from Picard's final season — the ship at the centre of the story, and the future Enterprise-G.
• The 48-page collector book — profile, annotated plans and the making of Star Trek: Picard, with behind-the-scenes photography and concept art. More than a booklet — it's a coffee-table read in its own right, full of exclusive material you won't find anywhere else.
• A screen-accurate die-cast model — 4–5 inches (10–13 cm) long, on a display base.
• Start your library — the clue's in the name: every release is a starship and its own book, all to the same size and format, so your Starship Library grows into a display that looks superb lined up on a shelf.
• Officially licensed — built to the exacting Master Replicas standard as an official Star Trek collectible.

Our largest Eagle yet, and the only one that comes with booster engines — four separate modules, magnetically attached, exactly as Alan fitted them in “New Adam, New Eve”. It arrives with its own landing pad and a Moon Buggy: a whole corner of Moonbase Alpha, not just the ship. In the second season story, an incredibly powerful being called Magus kidnaps a team from Moonbase Alpha and prevents the Eagles from taking off to rescue them. Alan’s answer is to fit Eagle One with four additional booster engines, significantly increasing its power. This model recreates that ship — one of the most distinctive Eagle configurations the series produced. Specification Length — 30 cm (roughly 12 inches) Tooling — Sixteen 12 Pod — standard detachable pod included Boosters — four side booster rockets, 6 cm each, attach to the transporter pod with a magnetic plate, display with or without Materials — a mix of die-cast and injection-moulded parts Launch platform — included, a section of Alpha landing pad with surface markings and raised perimeter Also included — a Moon Buggy, separate and removable Heritage — an updated version of the 30 cm die-cast Eagle first released in 2004 Availability — pre-order, shipping February 2027

Collectors edition, fully articulated figure of the Fourth Doctor. Featuring a fully realised likeness of Tom Baker, authentically styled costume, highly detailed accessories and display base. Packaged in full-colour display box.

"This is a light-up replica of the Master Systems Display (MSD) of the Odyssey-class U.S.S. Enterprise NCC-1701-F, which was created for Star Trek Online. The artwork is packed with detail showing the location of all the key systems, from the Armory to the Warp Core Ejection Hatch. The artwork is visible when the power isn’t on, but comes to life when you push the button on the side. It works in a very similar way to the real displays used on the show, with backlit film. The light panel is 31.5 inches (80 cm) long and 10.25 inches (26.5 cm) high."

"Think you know all about Star Trek: The Next Generation? This is the chance to prove it. Which crew member grew up in Alaska? Who did Data called “Grandpa”? How many decks are there on the U.S.S. Enterprise NCC-1701-D? This trivia deck is packed with hundreds of questions divided between Characters, Ships & Tech and Missions. Once you know the category, challenge your friends by choosing your level of difficulty: are you an ensign, a commander or a captain? Only the best are good enough for Starfleet. "

This is part of our new series of briefing packs that give a unique insight into Star Trek ships. This is the first of a new style of briefing pack that features oversized sheets with detailed isometric drawings of key locations and equipment using the original 3D files created by the Star Trek art department.

The U.S.S. Titan NCC-80102-A pack consists of detailed sheets covering exterior views of the ship that featured in Star Trek: Picard, the main bridge, bridge seating and consoles, observation lounge, turbolift, sickbay, stasis chamber, transporter room, crew quarters, replicators, EPS room, Klingon cloaking device, and the Brig.

Collectors edition, fully articulated figure of the Twelfth Doctor. Featuring a fully realised likeness of Peter Capaldi, authentically styled costume, highly detailed accessories and display base. Packaged in full-colour display box.

Turn your desk into the command deck of a Klingon K’t’inga-class battlecruiser with this extra-large desk mat, designed to sit under your keyboard and mouse. The mat uses authentic Klingon console artwork, which was created by Geoff Mandel for the Star Trek: Voyager episode “Prophecy”. The artwork gives you a chance to examine a screen-used graphic up close and personal, and it’s hard to resist working the controls as if you were commanding the ship yourself.