"These full-sized replicas of the Space 1999 Stun Gun and Commlock are based on careful study of the original props and feature working lights and sound effects, from the show. Both props use the widely praised Sixteen 12 tooling. The stun gun measures 4.33” (11 cm) from back to front and just over 5” (13 cm) from top to bottom, while the Commlock is just under 8” (20 cm) long, and 2” (5 cm) wide. The original stun guns were carried by Moonbase security guards and stored in racks on the Eagles. In the show they had different settings that included stunning, disintegrating and cutting. The Commlocks were clipped over the crew member’s belt. They were used to communicate with other Alphans, to open doors, and to pinpoint the wearer’s location. "

This is a light-up replica of the Master Systems Display (MSD) on the Sovereign-class U.S.S. Enterprise NCC-1701-E. . The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth.

The light panel is 31.5" (80 cm) long and 10.25" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film.

This is a light-up replica of the Master Systems Display from the bridge of the U.S.S. Voyager. It features the same graphic that was used on the TV series, which was created by Mike Okuda’s scenic art department. It shows all the ship’s key systems including the shuttlebay, warp cores, turbolift network, and main deflector. The panels are designed to be hung on a wall or displayed on a shelf. They are powered by a USB C cable and light up at the press of a button just like the displays on a starship. They work in a very similar way to the real displays used on the show with backlit film. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth. The light up panel measures an impressive 31.5” (60 cm) across and is 10.25” (26 cm) high. This is a preorder that will ship in Summer 2026.

"The laboratory Eagle appeared in the Space 1999 story “The Metamorph”, which opened the second season and introduced Maya. When two Alphan pilots were captured by Mentor, Commander Koenig took Eagle 4 to retrieve them. He ordered it to be fitted with a laboratory pod and with additional booster engines that were mounted on the top and were designed to increase its power and speed. These stunning models are based on the acclaimed Sixteen 12 tooling. This model of the laboratory Eagle Transporter is 5.5 inches (13 cm) long and has a detachable pod. It is a similar size to Master Replicas’ Starship Library series."

The Rescue Eagle appeared in several episodes of Space 1999, and played a particular big role in “Earthbound”, which was the fifth episode to be filmed. The rescue pod was painted with distinctive red stripes, suggesting that it was similar to an ambulance. These stunning models are based on the acclaimed Sixteen 12 tooling. This model of the Rescue Eagle Transporter is 5.5 inches (13 cm) long and has a detachable pod. It is a similar size to Master Replicas’ Starship Library series.

RARE Eaglemoss 1:10 scale statue from a series of Star Trek: Discovery versions of the Enterprise crew. The first statue in the series shows Spock as portrayed by Ethan Peck, wearing the Discovery version of his Starfleet uniform.

This Eaglemoss series was never released, but a small amount of the stock found its way into the market. The statue measures approximately 8 inches (20 cm) tall.

"This is a light-up replica of the Master Systems Display (MSD) for a Constitution-class Starship, like Captain Kirk’s U.S.S. Enterprise NCC-1701. It was created for the Star Trek: Enterprise story ""In A Mirror Darkly,"" when we discovered that the one of the Enterprise’s sister ships, the U.S.S. Defiant from the original series, had been sent to the Mirror Universe. Concept artist Doug Drexler created the artwork as if it were for the original Enterprise. He was inspired by the kind of graphics that were used on the original show and it shows several familiar locations including the bridge, sickbay, the briefing room and main engineering. The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth. The light panel is 31.5"" (80 cm) long and 10.25"" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film."

"The U.S.S. Defiant NCC-74205 was Starfleet’s first true warship. It was originally developed to counter the threat from the Borg, but it was considered to be overpowered and unstable, so the project was abandoned. It was revived after Benjamin Sisko made first contact with the Dominion and realized how dangerous they were. The Defiant was assigned to Deep Space 9 and, thanks to an agreement with the Romulans, it was fitted with a cloaking device. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book that includes a profile of the ship with annotated plan views and in-depth information about the design of the Defiant and the creation of the Dominion. The book features in-depth interviews with Star Trek: Deep Space Nine’s creators and rare behind-the-scenes photography and production art."

"The Eagle freighters appear in the first episode of Space 1999 “Breakaway”, when the Alphans try to move radioactive waste containers to prevent a massive explosion. The freighters were fitted with winches, and with magnetic grapplers that could lift the radioactive waste containers out of their silos and transport them across the lunar surface. However, the attempt to move the containers was a failure and a massive explosion forced the moon out of Earth’s orbit and into deep space. These stunning models are based on the acclaimed Sixteen 12 tooling. This model of the Eagle Freighter is 5.5 inches (13 cm) long and has a detachable pod. The grappler is magnetic and can be attached to the waste containers that come with the model. It is a similar size to Master Replicas’ Starship Library series."

"LIMITED EDITION • ONLY 500 PIECES The U.S.S. Merced was a California-class starship that was transformed in a terraforming accident in 2381. While it was under the command of Captain Durango, the Merced was assigned to work with the U.S.S. Cerritos to recover an ancient generation ship. Durango’s desire to take command led to both ships being “infected” with a terraforming fluid. The Cerritos managed to reverse the effects, but the Merced was badly damaged. Luckily, its crew were beamed on to a safe area of the generation ship. The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book. It is one of several limited-edition California-class ships that Master Replicas are producing. Its blue markings show that it belongs to the science division. All the California-class variants come with an in-depth book that includes a profile of the U.S.S. Cerritos, with annotated plan views and information about the creation of Star Trek: Lower Decks, based on an exclusive interview with the show’s creator Mike McMahan. The Merced is being produced in a limited edition of 500 pieces."

"This is the first in a series of briefing packs that provide a unique insight into Star Trek ships. Jett Reno’s Guide to the U.S.S. Athena is an internal document that was created by the Star Trek: Starfleet Academy art department to provide the writers and directors with essential information about the ship. It includes annotated exterior views, information about the ship’s different modes and its transformation and landing procedures, schematics showing the location of all the key systems including classrooms and dorms, and diagrams of all the key sets. The briefing pack consists of 120 pages and comes in a presentation portfolio."

This is a full-scale polyresin replica of the dedication plaque from the bridge of the U.S.S. Enterprise NCC-1701-D. This is the version that featured in Seasons 5 through 7 of Star Trek: The Next Generation. The plaque was designed by Scenic Art Supervisor Mike Okuda, who gave us the files he originally supplied to Jeff Clare in the Paramount sign shop. We used them to create this version, which is designed to be hung on a wall. At 11.5” x 9” (29 cm by 22.7 cm) this plaque is smaller than the plaques that were designed for Star Trek: Deep Space Nine and Star Trek: Voyager. The plaque comes without the wooden frame that featured on the bridge. The plaque details the date the ship was launched, where it was constructed, and its motto. As an in-joke it features the names of several members of the production team, who are listed as members of the Starfleet team that built the ship.  

The U.S.S. Buran was a 23rd-century Cardenas-class starship that was commanded by Captain Lorca. During the early months of the Federation-Klingon war it was involved in a transporter accident that brought the Mirror version of Lorca to the Prime Universe. Another Cardenas-class ship, the U.S.S. Yeager NCC-1347 fought at the Battle at the Binary Stars. It was disabled by the Klingons and some of the crew members, including Ash Tyler, were captured.  The model is part of Master Replicas Starship Library – a new range of 4 to 5-inch long models – and is accompanied by a 48-page book. The book includes a profile of the Buran, with annotated plan views and an in-depth exploration of the creation of Star Trek: Discovery with all-new interviews with costume designer Gersha Phillips, propmaster Mario Moreira, and makeup supremo Neville Page, featuring rare behind-the-scenes photography and original concept art.

DOCTOR WHO BATTLES IN TIME IS BACK! The classic Doctor Who Trading Card game is making a comeback. Collect heroes and monsters and pit them against one another in epic battles. Look out for special bonus cards that change the rules.

SPECIAL GAME PACK – ORDER NOW! Start your collection with this special Game Pack, which contains 80 new unique cards. 72 cards are reissues from the classic trading card game that have been printed on a special foil for the first time. 8 all-new cards feature the Fifteenth Doctor, his closest friends and some of his most powerful foes.

This is just the beginning: more cards are coming soon!

Collect Doctor Who Battles in Time with this set of five Obliterator packs. The Obliterator Set is being released in two editions. This is the Unlimited Retail Edition, which features a silver foil Obliterator logo. Each pack contains 6 randomly sorted cards* featuring high-spec UV glossed base cards, stunning rainbow foil enhanced rares, and premium holofoil super rares. PLUS with every pack there is a chance of getting one of the un-numbered, ultra rare Vortex cards, which are printed with new metallic technology. There’s only one of these in every 720 packs! There are 142 Obliterator cards to collect in total featuring characters from the Tenth Doctor right up to the latest series, including Daleks, Cybermen, monsters, villains and companions. * Cards are randomly sorted and packs are not guaranteed to contain the cards shown.