The XL USS Orville from Seth McFarlane's sci-fi series.

Eaglemoss only released a limited number of ships from the series, and this is the XL version of the hero ship.

The model is approximately 10.25 inches (26 cm) long.

Destroyers were a pivotal part of the Krill military. A destroyer engaged enemy ships in direct combat, and its bombing capabilities made the ship the ideal choice to attack colony planets from space.

Yet destroyers were more than simple attack ships: the Krill designed them to host entire families, providing living arrangements, religious sanctuaries, and classrooms for children.

The model is approximately 8.66 inches (22 cm) long.

**PRE ORDER**

In moments of stress or contemplation, Captain Picard asked the replicator to produce a hot cup of Earl Grey tea. The replicator, knowing exactly what he wanted, produced the tea in an elegant glass cup.

The Star Trek: The Next Generation art department wanted the cup to look both futuristic and timeless. It had to be at home in the 24th century, but it also had to be instantly recognizable. Rather than creating their own tea cup from scratch, they looked for the best examples of modern, twentieth century design.

They settled on a glass tea cup made by European homewares company, Bodum.

The instantly recognizable BISTRO cup became so closely associated with Star Trek, that fans informally refer to it as “The Picard Cup”. It went on to appear in Star Trek: Voyager: Star Trek: Picard.

The original version of the TARDIS was modified at the end of the show’s third season. The design of the roof was altered so that it was flatter, and new doors were made with a new lock. This version first appeared in “The War Machines” and was used throughout the Second Doctor’s tenure. It was given a refit before “The War Games”.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

This is a pre-order that is due to ship in September.

During the Seventh Doctor’s tenure, there were actually three different versions of the TARDIS, all of which were made of fibreglass. They were all cast from the same moulds, but there were differences to do with the frame around the sign at the top and the position of the lock and handles. These TARDIS props had doors on the front and the back. On one side, the door opened on the left; on the other side, it opened on the right.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

This is a pre-order that is due to ship in September.

LIMITED EDITION • WEBSITE EXCLUSIVE

In ‘The Happiness Patrol’ the Doctor and Ace land on the planet Terra Alpha, where sadness is against the law. In an effort to enforce joy, Helen A’s Happiness Patrol paint the TARDIS pink. After the Doctor helps with the rebellion, normal emotions are restored and the TARDIS is painted blue again.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.8 cm tall.

This is a pre-order that is due to ship in September.

The original TARDIS prop was modified in “The War Games” and this version was used throughout the Third Doctor’s stories and for the Fourth Doctor's first two seasons. Various repairs were made during this time, most notably, it was given a fresh coat of paint. The original prop was eventually retired in 1976, meaning it had been in service for 13 years.

The model is 1:21 scale to match the Eaglemoss figurines and stands 12.9 cm tall.

This is a pre-order that is due to ship in September.

One of the last models Eaglemoss released was the light cycle from the classic 1982 movie 'Tron'. This is the blue version. The red, yellow and orange versions were also released in a limited edition. The film used groundbreaking effects techniques and the cycles themselves were designed by the legendary Syd Mead, who is famous for his work on 'Blade Runner' and 'Aliens'. The Eaglemoss model is 8.7 inches (22 cm) long.

EXCLUSIVE LIMITED EDITION Eaglemoss RED model of the light cycle from the 1982 movie Tron. The model is 8.7 inches (22 cm) long and is available here for the first time.

Visionary pioneer Gerry Anderson created a world full of captivating characters, spectacular vehicles and exciting stories that are beloved by generations of fans around the world. Now you can create your own miniature adventures with The Anderson Collection.

All your favorite heroes and villains brought to life in a cool retro style. Designed with collectors in mind, each figure sports 5 points of jointed articulation, authentic character likenesses and detailed costumes. Faithfully recreated in 3.75 inch (9.5 cm) scale and packaged in a nostalgic format featuring gorgeous artwork.

Collect all the figures from your favorite shows Thunderbirds, Stingray, Joe 90, Captain Scarlet, UFO, and Space: 1999.

Age restriction 14+

Collectors edition, fully articulated figure of the Twelfth Doctor. Featuring a fully realised likeness of Peter Capaldi, authentically styled costume, highly detailed accessories and display base. Packaged in full-colour display box.

The U.S.S. Cerritos is a California-class starship that is tasked with making second contact, offering engineering support and making supply runs. It's the star of Star Trek: Lower Decks, and is where Mariner and Boimler served their time as ensigns.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

This is a light-up replica of the Master Systems Display (MSD) on the U.S.S. Defiant. The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth.

The light panel is 31.5" (80 cm) long and 10.25" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Defiant. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that the Defiant was the first starship in its class and was launched from the Antares ship yards on Stardate 47538.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Deep Space Nine.

This is a preorder that will ship in the fall of 2025.

The U.S.S. Discovery is a Crossfield-class starship that was used as the testbed for the spore drive, and was active during the Klingon war.

This is the original version, which featured in the first two seasons of Star Trek: Discovery, before the ship was sent to the 32nd century.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

When the big screen version of Star Trek was rebooted in 2009, the creators redesigned the Enterprise to look sleeker and sexier than ever. As director JJ Abrams said, this was the "hotrod" version of the ship. This version also appeared in Star Trek: Into Darkness before it was modified for Star Trek Beyond.

The model is part of Master Replicas new range of 4 to 5-inch long  die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

This version of the U.S.S. Enterprise made its debut at the end of Star Trek: Discovery's first season before going on to star in Star Trek: Strange New Worlds where it is commanded by Captain Pike.

The model is part of Master Replicas new range of 4 to 5-inch long models, and is accompanied by a 48-page book, which slides into the base to make a display.

This is a full-sized, polyresin replica (15 inches wide) of the dedication plaque for the original series Enterprise. It was on the bridge of the ship just to the right of the turbolift doors.

The plaque was carefully researched by Star Trek scenic artist Mike Okuda who supplied us with detailed drawings that we used to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time an officially licensed full-size version has ever been available.

You may be surprised to see that it identifies the Enterprise as a Starship-class ship. The term Constitution class was used by fans but only became canon in the first season of TNG when it appeared on a computer readout in "The Naked Now".

This is a full-sized, polyresin replica of the dedication plaque for the U.S.S. Enterprise NCC-1701-A. It was the first time a dedication plaque had said that the Enterprise was a Constitution-class ship.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque.

The plaque confirms that the Enterprise was was launched from Earth's San Francisco Fleet Yards.