The Expanse collection was launched in the last days of Eaglemoss and had only limited distribution. The first model was an XL version of the series' main ship — the Rocinante, a Martian corvette that ended up under the charge of James Holden.

The Eaglemoss model measures 12.8 inches (32.5 cm) long and comes in its original box.

The F-302 fighter interceptor was Earth's first fighter designed to operate in space. It was developed using alien technology that was acquired through the use of the stargates, and was armed with railguns and guided missiles. It had a hyperdrive and could make interstellar journeys.

Length: 4 inches (10 cm); Width: 8 inches (20 cm)

One of the most iconic designs in the history of Stargate. The Goa'uld used Ha'tak motherships to impose their will on the Galaxy.

These vast ships resembled giant, spaceborne pyramids and were equipped with fearsome firepower. After the fall of the Goa'uld they were operated by the Free Jaffa.

This is one of a limited number of Stargate models produced by Eaglemoss.

The model is 8 inches (20 cm) wide.

The Koto was an MCRN patrol destroyer that was illegally sold to Marco Inaros and became part of the Free Navy. It was one of several ships that attacked the Rocinante in the episode 'Hard Vacuum', when it was disabled by an attack from Drummer's ship.

The Koto was designed by Ryan Dening, who also designed many ships for Star Trek.

It was produced but never sold by Eaglemoss and we have acquired all the stock. Length approximately 9 inches (22 cm).

The Razorback started life as Julie Mao's racing ship. Avasarala and Bobbie use it to escape from the Guanshiyin before Bobbie ends up owning it. She uses it to investigate the missing Martian ships, which she discovers have been sold to the Free Navy.

The Eaglemoss model is 7.25 inches (18.5 cm) long.

The Pegasus has been out of stock for ages, but it's coming back. New stock will be available in February 2026.

The Pegasus was Admiral Caine's Battlestar in one of the rebooted series' most acclaimed story arcs. It was more advanced and powerful than theGalactica, which it massively outgunned.

Most of the design work on the ship was done by CG modeller Jose Perez who set out to make a state of the art ship that was a contrast to the older Galactica. The model is just under 10.5" (26.5 cm) long.

This is a preorder that will ship from February 2026.

This model, from Battlestar Galactica: Blood & Chrome shows the Galactica in its prime during the First Cylon War, when it had more gun turrets and heavier armor plating.

The Eaglemoss model is just over 10.5 inches (27 cm) long.

The XL USS Orville from Seth McFarlane's sci-fi series.

Eaglemoss only released a limited number of ships from the series, and this is the XL version of the hero ship.

The model is approximately 10.25 inches (26 cm) long.

The ships in The Expanse rely on an Epstein drive to reach the kinds of speed that make interplanetary travel practical. The drive was first tested on a second-hand yacht, and was discovered almost by accident.

This is one of the last models that Eaglemoss produced and we have them all.

Yacht length: 6 inches (16 cm); width: 4.7 inches (12 cm); height: 4.3 inches (11 cm).

In the reimagined Battlestar Galactica the design of the Cylon Basestar was completely reworked. The new Basestar was an organic spaceship that was as much a being as a vehicle. It was controlled by a hybrid that could perceive things outside normal reality.

The new version was designed by artists Gary Hutzel and Eric Chu, who saw it as more advanced than the human ships.

The Eaglemoss model measures 10.25 inches (26 cm) across.

The Battlestar Valkyrie was smaller and more maneuverable than the Galactica. It served during the First Cylon War, and was part of the ghost fleet that we saw in  Blood & Chrome.

Concept artist Richard Livingston originally designed the Valkyrie for the episode Home, where it appears briefly in a flashback sequence. His design went through several changes when the model was built by Pierre Drolet, who made it look more like a familiar Battlestar. The Eaglemoss model is just over 10.5 inches (27 cm) long.

Destroyers were a pivotal part of the Krill military. A destroyer engaged enemy ships in direct combat, and its bombing capabilities made the ship the ideal choice to attack colony planets from space.

Yet destroyers were more than simple attack ships: the Krill designed them to host entire families, providing living arrangements, religious sanctuaries, and classrooms for children.

The model is approximately 8.66 inches (22 cm) long.

For its third season The Orville got a new shuttle that looked sleeker and more aggressive than its predecessor.

The model is 7 inches (18 cm) long

The original Cylon Raider is one of Battlestar Galactica's most iconic designs. The ships were typically seen in groups of three in combat with the Vipers, with shots cutting away to the Cylon pilots inside.

The Raider was designed by concept artist Ralph McQuarrie who gave it a disc-shape like the larger baseship and added twin guns on either side.

The model has a wingspan of 7.5 inches (19 cm).

RARE SITE EXCLUSIVE The Kaylon Interceptor from The Orville is the smaller ship with a 'tail' that was carried inside the Kaylon sphere.

The model is just under 7 inches (17.5 cm) long. 

In the original 1978 show, the Battlestar Galactica was an advanced vessel that led the Colonial fleet. It had a crew of 500 and carried 75 vipers. The ship was designed by concept artist Ralph McQuarrie who started on the new TV show after working on Star Wars. The brief was to create an aircraft carrier and he gave the ship twin pods on outriggers that provided the vipers with a runway they could land on.

The model is just over 10.5 inches (27 cm) long.

HOT DOG VARIANT LIMITED TO 750

The modern Viper is a careful update of Ralph McQuarrie's original design that was created for the 2004 reimagining of Battlestar Galactica. Writer and producer Ron D. Moore wanted to make the show about life on an spaceborne aircraft carrier and the Vipers and their pilots were central to his plans.

The Eaglemoss model bears the call sign "HOT DOG" for pilot Lt. Brendan Constanza, and is 10.6 inches (27 cm) long.

The Sphere, or Cruiser, was the Kaylon's main attack ship. Each Cruiser was equipped with one Interceptor, which served as an auxiliary craft. All spheres were equipped with highly advanced technology, a single central cannon with impressive firepower and a hull that resisted target-locking.

Cruisers are capable of sustained quantum travel at 35 lightyears per hour.

The model is just under 7 inches (17.5 cm) across.

One of the last models Eaglemoss released was the light cycle from the classic 1982 movie 'Tron'. This is the blue version. The red, yellow and orange versions were also released in a limited edition. The film used groundbreaking effects techniques and the cycles themselves were designed by the legendary Syd Mead, who is famous for his work on 'Blade Runner' and 'Aliens'. The Eaglemoss model is 8.7 inches (22 cm) long.

Since the first season of The Expanse the Rocinante has been at the heart of the action. It is an MCRN Corvette that was carried aboard the Martian navy flagship, the MCRN Donnager. After Holden and his crew took control they renamed it the Rocinante and it became their home.

In the real world the Roci was designed by Ryan Dening, who also worked on Star Trek.

This is the smaller of the two Eaglemoss versions, and it is 8.5" and (21.5 cm) long..