This is a replica of the Pegasus gate from Stargate Atlantis. It was discovered in the city of Atlantis after Daniel Jackson realised that, if they had enough power, the stargates could be used to travel between galaxies.

The Atlantis Gate was an upgrade on the SG-1 version. On the show its glyphs appeared digitally, as the crew dialed into a new location. The gate had been left unused for thousands of years after the Ancients fled to the Milky Way after losing their battle with the Wraith, but was revived by the Pegasus team.

The replica gate is made of polystone and comes with a separate display base that carries the Stargate Atlantis logo. Master Replicas has carefully reproduced every glyph on the gate, which was based on a digital model that was supplied by MGM.

This is a stunning, illuminated replica of the ZPM, or Zero Point Module, which is one of the most important artifacts in the Stargate universe. The ZPMs are effectively powerful batteries that were created by the Ancients to power their cities, outposts, and ships. The Ancients and the Asurans are the only races that knew how to create ZPMs. Using them depletes their energy, so they are now very rare and the Atlantis crew were always looking for fully powered versions. Our version stands just over 14” (36 cm) tall. It is illuminated and is  powered by a USB-C cable that plugs into the base. 

"The Alkesh was a mid-sized vessel that the Goa’uld used as a troop transport and as a bomber. It was capable of traveling faster than light and could enter a planet’s atmosphere, where it was often used to mount “bombing” raids using plasma charges. When it was used as a troop transport, the Jaffa were deployed using transportation rings. The model is based on the original CG asset used on the show and is 7.25” (18.5 cm) long. "

This is the first in a new line of detailed Stargate desktop replicas, reproducing some of the most iconic props from the classic TV series. This is a beautifully detailed replica of the helmet worn by Apophis’s Serpent Guard. As befits the Serpent god, the helmet is designed to look like a cobra. The Serpent Guard was made up of Apophis’s most trusted Jaffa and for centuries they were dedicated to serving him. That began to change when Apophis’s First Prime, Teal’c, turned on him and joined SG-1. The replica helmet was digitally sculpted, based on careful study of the original props. It has been cast in polyresin to ensure a high level of accuracy, before being painted. The helmet is the perfect size to sit on a desk or shelf and is just under 6” (15 cm) tall when displayed on its bespoke stand.

"This is the second in a new line of detailed Stargate desktop replicas, reproducing some of the most iconic props from the classic TV series. This is a beautifully detailed replica of the helmet worn by the Horus Guard. As befits the falcon god, the helmet is designed with the fierce, hooked beak and sculpted headdress of Horus himself. The Horus Guards served Ra and later Heru'ur, and their helmets were among the first sights to greet SG-1 when they stepped through the gate to Abydos - a warning that the gods of Earth's ancient past were very much alive, and still ruling. The replica helmet was digitally sculpted, based on careful study of the original props. It has been cast in polyresin to ensure a high level of accuracy, before being painted. The helmet is the perfect size to sit on a desk or shelf and is just under 6"" (15 cm) tall when displayed on its bespoke stand."

"One episode. One ship. One very big bang. The Replicators were tearing through the Asgard fleet, and Thor needed help. In “Small Victories”, the opening episode of Stargate SG-1 Season 4, Carter joins him far from Earth and finds the Asgard’s newest warship still unfinished. It carries Jack O’Neill’s name, and it’s about to become the most expensive trap in the galaxy. The O’Neill only had one outing, but fans still talk about it. Our model captures it just as it looked on screen, using the original VFX files from the production. What makes it special: Made from the original Stargate SG-1 VFX files, so every curve matches what you saw on screen Die-cast construction, so it feels solid and weighty 170mm long, with a display stand for your shelf or desk Looks great next to our Bilskirnir, Thor’s ship PRE-ORDER: Due to ship to customers in March 2027 Specifications: Length: 170mm (6.69"") Width: 155mm (6.10"") Height: 60mm (2.36"") Material: Die-cast Display stand included Created from the original Stargate SG-1 VFX files Images shown are digital renders and will be replaced with product photography during development Pre-order: due to ship to customers in March 2027 This is a collectible intended for display. It is not a toy and is not suitable for anyone under the age of 14."

The Ma’tok staff (commonly known as a staff weapon) was the Jaffa’s weapon of choice. It is designed to fire bolts of plasma, with a range of 50-60 meters. The intensity of the blasts, which are powered by a Naquadah generator, can be adjusted so it can stun a human or blast through rock. At close quarters they were often used as a conventional staff weapon. The full-size staff was 6’ 6” (2 m) tall. The desktop replica was digitally sculpted with careful reference to the original props. It  is 12” (30 cm) long and comes with a stand that can be used to display it vertically or horizontal. Prototype images, Final Staff will be diecast for strength and hand finished.

"The latest Stargate desktop replica is an incredibly detailed replica of the helmet worn by Anubis’s Jaffa guards. Anubis was one of the most dangerous system lords. Centuries ago, he killed his master Apep and set himself up as the Emperor of the Goa’uld. This led to a civil war, which ended when Ra overthrew Anubis and banished him. At the turn of the 21st century Anubis returned to assume command of the Goa’uld. Anubis was known as the jackal god and this was reflected in the design of the helmets worn by his Jaffa. The helmets were only actually seen in the movie and at the end of Season 8 when they were worn by Jackal guards in Ra’s service. The replica helmet was digitally sculpted, based on careful study of the original props. It has been cast in polyresin to ensure a high level of accuracy, before being painted. The helmet is the perfect size to sit on a desk or shelf and is just under 6” (15 cm) tall when displayed on its bespoke stand."

The Starship Destiny was built by the Ancients and launched more than fifty million years ago. Its role: to seed stargates and investigate a mysterious message hidden in the fabric of the universe. What happened to the ship and her crew is a mystery. The arrival of an expedition from Earth, who activated the the ship’s stargate in 2009, provided the Destiny with a new crew — and a new mission.

The model is made of die-cast and measures 8.75 inches (22 cm) from front to back.

Nine chevrons from home, and your desk finally looks the part. This extra-large desk mat puts the Ancient starship Destiny across your workspace - hull schematics, systems readouts and glowing Ancient interface panels, printed edge to edge in that unmistakable deep-space blue. It sits under your keyboard and your mouse, so the whole setup reads as one console. Why you'll want one: * Full Destiny schematic - the ship rendered as a technical blueprint, with plan, profile and detail views, exactly as the Ancients would have logged her * Ancient interface design - dials, gauges, status blocks and Ancient numerals, inspired by the control interfaces of Stargate Universe * Extra large: 31.25"" x 11.5"" - covers keyboard, mouse and the mug you shouldn't have put there * Smooth, fast mousing surface - consistent glide for work or gaming, with no snagging at the edges * Stitched edges - won't fray or peel at the corners, however hard you type * Non-slip rubber back - stays exactly where you put it, all day * Sharp, saturated print - the fine schematic linework and Ancient text stay crisp, not muddy Most Stargate collectibles live on a shelf. This one you actually use - every day, for hours, under your hands. It's the quiet kind of fandom: nobody on the video call spots it, but you know what you're flying. A proper piece of Stargate on your desk for less than the price of a boxset! A genuinely good gift for the Stargate fan who already owns the Puddle Jumper and the ZPM, and an easy first buy for anyone building a Stargate desk setup. Specifications: Dimensions: 31.25"" x 11.5"" (approx. 79cm x 29cm) Surface: Rubber, printed design Edges: Stitched Backing: Non-slip Use: Desk mat, mouse pad, keyboard mat, looking good Care: Wipe clean with a damp cloth. Do not machine wash. This is an art piece intended for display and use. It is not a toy and is not suitable for anyone under the age of 14."

"Explore Destiny like Eli did. This replica Kino is digitally modelled from screen references to capture its intricate mechanical detail, which is one of the trickiest designs in Stargate Universe to reproduce. Eli Wallace (David Blue) found the Kinos aboard the Ancient ship Destiny in Season 1, Episode 2, ""Air, Part 2"". These small floating reconnaissance drones are flown remotely with a Kino remote. The crew used them to film, scout unexplored parts of the ship and check dangerous environments, and they appear throughout the series. Why you'll love it: Digitally modelled from screen references for accuracy Multi-part cast resin with a hand-finished internal ball Metallic-style paint finish that captures the look of Ancient technology 11cm diameter, ideal for any Stargate collection PRE-ORDER: Due to ship December 2026 Specifications: Diameter: 11cm (4.33"") Materials: Multi-part cast resin Hand-finished internal ball Metallic-style paint finish Digitally modelled from screen references Images show an early sample and will be updated when the final sample arrives Pre-order: due to ship December 2026"