When Battlestar Galactica returned in 2004, it was with a redesigned ship that cleverly echoed the original. Seen from the side, Eric Chu's design looks radically different, but when turned around, the familiar shapes of the classic version are evident in the design.

In the series, the Galactica is a relic of an earlier age, but its primitive technology allowed it to survive the Cylon attack to become humanity's flagship.

The model measures just over 10.5 inches (27 cm) long.

The Koto was an MCRN patrol destroyer that was illegally sold to Marco Inaros and became part of the Free Navy. It was one of several ships that attacked the Rocinante in the episode 'Hard Vacuum', when it was disabled by an attack from Drummer's ship.

The Koto was designed by Ryan Dening, who also designed many ships for Star Trek.

It was produced but never sold by Eaglemoss and we have acquired all the stock. Length approximately 9 inches (22 cm).

The Razorback started life as Julie Mao's racing ship. Avasarala and Bobbie use it to escape from the Guanshiyin before Bobbie ends up owning it. She uses it to investigate the missing Martian ships, which she discovers have been sold to the Free Navy.

The Eaglemoss model is 7.25 inches (18.5 cm) long.

This model, from Battlestar Galactica: Blood & Chrome shows the Galactica in its prime during the First Cylon War, when it had more gun turrets and heavier armor plating.

The Eaglemoss model is just over 10.5 inches (27 cm) long.

The XL USS Orville from Seth McFarlane's sci-fi series.

Eaglemoss only released a limited number of ships from the series, and this is the XL version of the hero ship.

The model is approximately 10.25 inches (26 cm) long.

The ships in The Expanse rely on an Epstein drive to reach the kinds of speed that make interplanetary travel practical. The drive was first tested on a second-hand yacht, and was discovered almost by accident.

This is one of the last models that Eaglemoss produced and we have them all.

Yacht length: 6 inches (16 cm); width: 4.7 inches (12 cm); height: 4.3 inches (11 cm).

In the reimagined Battlestar Galactica the design of the Cylon Basestar was completely reworked. The new Basestar was an organic spaceship that was as much a being as a vehicle. It was controlled by a hybrid that could perceive things outside normal reality.

The new version was designed by artists Gary Hutzel and Eric Chu, who saw it as more advanced than the human ships.

The Eaglemoss model measures 10.25 inches (26 cm) across.

Destroyers were a pivotal part of the Krill military. A destroyer engaged enemy ships in direct combat, and its bombing capabilities made the ship the ideal choice to attack colony planets from space.

Yet destroyers were more than simple attack ships: the Krill designed them to host entire families, providing living arrangements, religious sanctuaries, and classrooms for children.

The model is approximately 8.66 inches (22 cm) long.

For its third season The Orville got a new shuttle that looked sleeker and more aggressive than its predecessor.

The model is 7 inches (18 cm) long

RARE SITE EXCLUSIVE The Kaylon Interceptor from The Orville is the smaller ship with a 'tail' that was carried inside the Kaylon sphere.

The model is just under 7 inches (17.5 cm) long. 

The Viper MK VII was the modern design of fighter that was in service when the Cylons launched their attack on the 12 Colonies. It had the same basic layout as earlier models of Viper but its computer systems were vulnerable to Cylon attack. After they escaped, both the Galactica and Pegasus produced versions without the vulnerable computer systems.

The Eaglemoss model measures just over 10.5 inches (27 cm) long and features Captain Lee Adama's "Apollo" call sign on the hull.

The Sphere, or Cruiser, was the Kaylon's main attack ship. Each Cruiser was equipped with one Interceptor, which served as an auxiliary craft. All spheres were equipped with highly advanced technology, a single central cannon with impressive firepower and a hull that resisted target-locking.

Cruisers are capable of sustained quantum travel at 35 lightyears per hour.

The model is just under 7 inches (17.5 cm) across.

The Union Fighter PT-197, better known as the Pterodon, is a super-sleek one-man fighter, which made its debut at the beginning of the third season of The Orville. It was part of a new fleet of fighters that was introduced in the aftermath of the Kaylon War. It is incredibly maneuverable and, as Gordon will tell you, a hell of a lot of fun to fly.

The model, which measures just under 9 inches (22 cm)nose to tail, is made of die-cast and is based on the original CG model that was created for the show. It has never been available before.

Shipping From December 2024

Since the first season of The Expanse the Rocinante has been at the heart of the action. It is an MCRN Corvette that was carried aboard the Martian navy flagship, the MCRN Donnager. After Holden and his crew took control they renamed it the Rocinante and it became their home.

In the real world the Roci was designed by Ryan Dening, who also worked on Star Trek.

This is the smaller of the two Eaglemoss versions, and it is 8.5" and (21.5 cm) long..

**Previously Sold Out Due To High Demand - Now Available To Pre Order**

Battlestar Galactica's Raptors were the equivalent of helicopters and were used for reconnaissance and transport missions. They were capable of faster-than-light travel and surface exploration.

The ship was designed and built as a life-size model by Ken Rabehl of the BSG art department, the robust model was big enough to accommodate five people and use on location. The Eaglemoss model is just under 9 inches (22.5 cm) from front to back.

Due to Ship April 2026

In the 2004 reimagined Battlestar Galactica, the fleet was regularly menaced by Cylon Raiders, which mounted strafing attacks on the human ships. The Cylon ships had a low level of sentience, which the show's creator Ron D. Moore likened to that of a horse.

The menacing design was created by concept artist Eric Chu, who gave it echoes of the design for the Cylon Centurion.

The Eaglemoss model is 10.6 inches (27 cm) long.

The Heavy Raptor is a compact, FTL-equipped craft designed for both atmospheric and space-based operations. This version is more heavily armed than the standard version with twin missile launchers mounted just behind the the cockpit.

The model is 8.85 inches (22.5 cm) long.

The original series Cylon Baseships consisted of twin discs built around a central column. They served as both heavily armed warships and carriers for the smaller Cylon Raiders. They were designed by legendary concept artist Ralph McQuarrie, who worked on Battlestar Galactica after his concept work for Star Wars.

The model measures approximately 6 inches (15.5 cm) across.

This version of the Viper appeared in the TV movie Blood & Chrome, which showed us a pivotal battle in the First Cylon war. The design is close to the version that artist Ralph McQuarrie designed for the original 1978 series, but was made more muscular and upgraded for modern audiences.

The Eaglemoss model is just under 10.5 inches (26.5 cm) long.