The Asurans are the Pegasus Galaxy's version of the Replicators - a race of nanites created by the Ancients, who became sentient and took on the form of their creators. They operated a wide range of Lantean technology including their ships. They most often used the large Aurora-class battleships, but they were supported by these powerful cruisers.

The Asurans generally use Lantean technology. The cruisers were armed with drones and energy weapons and could cloak themselves.

This is a die-cast model and is 8.5 inches (22 cm) long.

The Union Fighter PT-197, better known as the Pterodon, is a super-sleek one-man fighter, which made its debut at the beginning of the third season of The Orville. It was part of a new fleet of fighters that was introduced in the aftermath of the Kaylon War. It is incredibly maneuverable and, as Gordon will tell you, a hell of a lot of fun to fly.

The model, which measures just under 9 inches (22 cm)nose to tail, is made of die-cast and is based on the original CG model that was created for the show. It has never been available before.

Shipping From December 2024

Master Replicas, Insight Editions and Alcon Entertainment are proud to present Deckard’s Police Spiner Car, available for preorder now. The Spinner is a highly-detailed die-cast model of one of the most iconic vehicles to ever appear in a science-fiction movie. It is based on careful study of the model that appeared in Blade Runner 2049, which is a loving replica of the version from the original Blade Runner movie. This new die-cast model has been exhaustively researched and is incredibly detailed. It is 11 inches long and 4.5 inches wide. It is made of die-cast metal and high-quality resin and has a transparent canopy that allows you to look inside at the seats and the detailed dashboard, making for a beautiful display piece.

EXCLUSIVE LIMITED EDITION Eaglemoss RED model of the light cycle from the 1982 movie Tron. The model is 8.7 inches (22 cm) long and is available here for the first time.

**Previously Sold Out Due To High Demand - Now Available To Pre Order**

Battlestar Galactica's Raptors were the equivalent of helicopters and were used for reconnaissance and transport missions. They were capable of faster-than-light travel and surface exploration.

The ship was designed and built as a life-size model by Ken Rabehl of the BSG art department, the robust model was big enough to accommodate five people and use on location. The Eaglemoss model is just under 9 inches (22.5 cm) from front to back.

Due to Ship April 2026

In the 2004 reimagined Battlestar Galactica, the fleet was regularly menaced by Cylon Raiders, which mounted strafing attacks on the human ships. The Cylon ships had a low level of sentience, which the show's creator Ron D. Moore likened to that of a horse.

The menacing design was created by concept artist Eric Chu, who gave it echoes of the design for the Cylon Centurion.

The Eaglemoss model is 10.6 inches (27 cm) long.

The Heavy Raptor is a compact, FTL-equipped craft designed for both atmospheric and space-based operations. This version is more heavily armed than the standard version with twin missile launchers mounted just behind the the cockpit.

The model is 8.85 inches (22.5 cm) long.

The original series Cylon Baseships consisted of twin discs built around a central column. They served as both heavily armed warships and carriers for the smaller Cylon Raiders. They were designed by legendary concept artist Ralph McQuarrie, who worked on Battlestar Galactica after his concept work for Star Wars.

The model measures approximately 6 inches (15.5 cm) across.

This action figure shows Ensign Beckett Mariner when she was a junior officer on the U.S.S. Cerritos in the series Star Trek: Lower Decks.

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a phaser and PADD. It is part of a new series that features characters from all the modern Star Trek shows.

This is a preorder that will be shipping in the third quarter of 2025.

Special Shipping Rate. USA $7.99 (for one or two figures). UK £3.99.

This action figure shows Admiral Jean-Luc Picard in his civilian clothes, armed with a phaser, as he visits the U.S.S. Titan NCC-80102-A in the third season of Star Trek: Picard

The figure is 4.5 inches (11.4 cm) tall. The accessories also include a PaDD. It is part of a new series that features characters from all the modern Star Trek shows.

This is a preorder that will be shipping in the third quarter of 2025.

Special Shipping Rate. USA $7.99 (for one or two figures). UK £3.99.

When the big screen version of Star Trek was rebooted in 2009, the creators redesigned the Enterprise to look sleeker and sexier than ever. As director JJ Abrams said, this was the "hotrod" version of the ship. This version also appeared in Star Trek: Into Darkness before it was modified for Star Trek Beyond.

The model is part of Master Replicas new range of 4 to 5-inch long  die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

Eaglemoss made replicas of the dedication plaques found on the bridge of Starfleet ships. This plaque is for Captain Archer's ship - the Enterprise NX-01, and features the ship's motto 'to boldly go where no man has gone before.'

The Eaglemoss plaques are designed to be displayed on a wall or on a shelf, and measure approximately 10.25 inches (26 cm) across.

This is Master Replicas first ever Doctor Who ship: the Dalek saucer from 2005's 'The Parting of the Ways'. This impressive polyresin model is 21 cm across and was sculpted by Dalek expert Gavin Rymill. The Daleks used saucers with a similar design in the TV Century 21 Dalek comic strip, but in the 1960s TV budgets didn't stretch to expensive spaceship models. The classic Dalek ship only made its debut in 2005 when a massive fleet of Dalek ships prepared to invade Earth. The ship was made as a 3D CG model by the Mill. Master Replicas recruited Dalek expert Gavin Rymill to recreate the ships using renders made at the time and careful study of the episodes. 

This version of the Viper appeared in the TV movie Blood & Chrome, which showed us a pivotal battle in the First Cylon war. The design is close to the version that artist Ralph McQuarrie designed for the original 1978 series, but was made more muscular and upgraded for modern audiences.

The Eaglemoss model is just under 10.5 inches (26.5 cm) long.

The Osiris dates from the first Cylon War and was part of the fleet that featured in Blood & Chrome. It was a stealth frigate, or pocket battleship. The original VFX model was designed by concept artist Richard Livingston.

The Eaglemoss model is just over 10.5 inches (27 cm) long.

Master Replicas is proud to announce the launch of a brand-new line of officially licensed model ships from Mass Effect.

Leading the launch of this impressive new collectible range is the Normandy SR-2 from Mass Effect 3.

Commander Shepard's legendary vessel has been meticulously crafted in die-cast metal to capture every detail. The model was based on in-game assets to ensure that it is as accurate as possible. It measures 8.66 inches (22 cm) in length, and comes with a stand making it ideal for any collector's shelf or desk.

This is a preorder that will ship in the spring of 2026.

This action figure shows Lt. Spock as portrayed by Ethan Peck in Strange New Worlds. He carries a phaser and tricorder.  The figure is 4.5 inches (11.4 cm) tall. and is part of a new series that features characters from all the modern Star Trek shows.

This is a preorder that will be shipping in the third quarter of 2025

Special Shipping Rate. USA $7.99 (for one or two figures). UK £3.99.

The 2004 series of Battlestar Galactica upgraded all the elements of the show, including the Cylons themselves. The modern version of the Centurion was a fully-CG creation that took the series' effects to a new level. In the show, the Centurions were ruthless killing machines with limited intelligence and self awareness.

The statue stands 7.5 inches (19 cm) tall.

This is a full-sized, polyresin replica (14 inches wide by 10.5 inches tall) of the dedication plaque for the U.S.S. Voyager. It was on the bridge of the ship just to the right of the turbolift doors.

The original plaque was designed by Star Trek scenic artist Mike Okuda who supplied us with the instructions he gave to the prop shop in 1994. We used them to create this version, which is designed to be hung on a wall. Eaglemoss made a much smaller version of the plaque. To our knowledge this is the first time a full-size version has ever been available.

The plaque confirms that Voyager was an Intrepid-class starship that was launched from Earth Station McKinley on Stardate 48038.5. As an in-joke, the names of the people who worked on the ship are actually members of the crew that made Star Trek: Voyager.