There's nothing better to cuddle up to than this plush version of Star Trek: Lower Decks Badgey. Sure, he's a psychopath who wants to kill us all, but rendered in plush, he couldn't be cuter or cuddlier.

Badgey was originally a training hologram, who was created by Rutherford. Unfortunately, he was made using unstable AI and, after some holodeck malfunctions, he gained sentience and set out to kill his creator. Despite having his neck broken and his memory wiped, he kept coming back before eventually evolving into a digital god and heading off to create his own universe.

Badgey is the second in Master Replicas Lower Decks plush series and joins Moopsy, which is back in stock after a sell-out first run.

Order now to get the first edition, which comes with a limited-edition Badgey card.

Size: 10 inches x 5.5 inches (25 cm x 14 cm).

Drink like a Starfleet officer with these exclusive mugs straight from the 25th century.

These brushed steel mugs would look right at home in Starfleet. Each one features the logo of a different division: Starfleet Academy in San Francisco, where generations of Starfleet officers have been trained; the Galaxy Class Starship Design Project, which was responsible for designing and building the U.S.S. Enterprise NCC-701-D; and Starfleet Headquarters itself.

The mugs were designed and created by Eaglemoss and are limited edition; exclusively available through MasterReplicas.com.

The mugs are 500ml / 17oz.

Drink like a Starfleet officer with these exclusive mugs straight from the 25th century.

These brushed steel mugs would look right at home in Starfleet. Each one features the logo of a different division: Starfleet Academy in San Francisco, where generations of Starfleet officers have been trained; the Galaxy Class Starship Design Project, which was responsible for designing and building the U.S.S. Enterprise NCC-701-D; and Starfleet Headquarters itself.

The mugs were designed and created by Eaglemoss and are limited edition; exclusively available through MasterReplicas.com.

The mugs are 500ml / 17oz.

The U.S.S. Franklin's dedication plaque could be seen on the bridge of the historic ship. The Eaglemoss replica, for wall or shelf display, reveals that the prop used in the movie describes the ship as 'Starship class' and had the motto 'To Boldly Go Where No Man Has Gone Before'.

The Eaglemoss replica is just under 9 inches (22.5 cm) across.

The U.S.S. Shenzhou was commanded by Captain Philippa Georgiou. The dedication plaque on the bridge revealed that it was a Walker-class ship that was constructed at the San Francisco Shipyards. The plaque also reveals that its motto was "All existing things are really one."

The Eaglemoss replica plaque is 8.66 inches (22 cm) long by 6.3 inches (16 cm) tall, and is designed for wall or shelf display.

The bridge of every Starship has a dedication plaque that records where it was built and when it entered service, and lists its class, registry and motto.

Eaglemoss produced a series of plaque replicas, designed to be hung on a wall or displayed on a shelf.

This plaque replicates that of the Crossfield-class U.S.S. Discovery and features the motto "All things can be understood once they are discovered; the point is to discover them."

The plaque measures approximately 9 inches (22 cm) across.

Eaglemoss made replicas of the dedication plaques found on the bridge of Starfleet ships. This plaque is for Captain Archer's ship - the Enterprise NX-01, and features the ship's motto 'to boldly go where no man has gone before.'

The Eaglemoss plaques are designed to be displayed on a wall or on a shelf, and measure approximately 10.25 inches (26 cm) across.

RARE Eaglemoss 1:10 scale statue from a series of Star Trek: Discovery versions of the Enterprise crew. The first statue in the series shows Spock as portrayed by Ethan Peck, wearing the Discovery version of his Starfleet uniform.

This Eaglemoss series was never released, but a small amount of the stock found its way into the market. The statue measures approximately 8 inches (20 cm) tall.

PREVIOUSLY SOLD OUT - MORE STOCK SHIPPING SEPTEMBER

In moments of stress or contemplation, Captain Picard asked the replicator to produce a hot cup of Earl Grey tea. The replicator, knowing exactly what he wanted, produced the tea in an elegant glass cup.

The Star Trek: The Next Generation art department wanted the cup to look both futuristic and timeless. It had to be at home in the 24th century, but it also had to be instantly recognizable. Rather than creating their own tea cup from scratch, they looked for the best examples of modern, twentieth century design.

They settled on a glass tea cup made by European homewares company, Bodum.

The instantly recognizable BISTRO cup became so closely associated with Star Trek, that fans informally refer to it as “The Picard Cup”. It went on to appear in Star Trek: Voyager: Star Trek: Picard.

Volume/Size: 0.2 l – 6.7 fl oz.

One of the most terrifying sounds in the Universe is "Moopsy". At first it may sound cute but seconds after you hear it, Moopsy will drink your bones.

This large talking plush reproduces the terror perfectly. Cuddle up to Moopsy if you dare and squeeze Moopsy's paw to hear Moopsy speak.

Moopsy  briefly escaped from captivity in Narj's Miraculous Menagerarium the Star Trek: Lower Decks episode "I Have No Bones Yet I Must Flee".

At 14" long, this Moopsy is also bigger than our original plush.

Size: 14 inches (25 cm )

Turn the sound on in the video to hear Moopsy talk.

Note: When this item ships, batteries will not be included, due to rules over importation and regulations

OUR BIGGEST LIGHT-UP PANEL YET 80 × 45 cm of screen-accurate starship, backlit at the touch of a button.   This is a light-up replica of the Master Systems Display for the U.S.S. Cerritos, the California-class starship at the heart of Star Trek: Lower Decks — using the artwork created for the show by legendary Star Trek scenic artist Mike Okuda. Switched off, it’s a striking piece of Star Trek art. Switched on, it glows to life just like the displays on screen.   Why you’ll love it • Our biggest panel yet — a commanding 80 × 45 cm (31.5" × 17.7") statement piece for any wall. The U.S.S. Cerrritos MSD is the same width as the other MSDs in the collection and is designed to be displayed alongside them. • Backlit film technology — press the button and the ship’s systems glow to life, using the same technology as Star Trek: The Next Generation. • Incredible artwork — spectacular switched on, and a striking piece of art when switched off, with high-resolution detailed artwork you can study in depth. • Densely labelled, screen-used artwork — created by Mike Okuda for the TV show. The MSD shows detailed ship schematics showing the ship from starboard, above, front and back with the key systems called out: warp core, impulse reactors, shuttlebay, phaser arrays and navigational deflector. • Easter Eggs – the MSD is packed with detail including the location of Cetacean Ops and the highly-classified Rubber Ducky room. • Collector-grade and officially licensed — built to the exacting Master Replicas standard as an official Star Trek: Lower Decks collectible. • Plug in and go — ready to hang on a wall or stand on a shelf.   Specifications • Dimensions: 31.5" × 17.7" (80 × 45 cm) • Illumination: backlit film, one-button on / off • In the box: USB-C cable included (mains USB plug not included) • Mounting: wall-mountable or freestanding • Licence: officially licensed Star Trek: Lower Decks collectible by Master Replicas   This is a presale product, due to ship in December 2026.

"This is a light-up replica of the Master Systems Display (MSD) for a Constitution-class Starship, like Captain Kirk’s U.S.S. Enterprise NCC-1701. It was created for the Star Trek: Enterprise story ""In A Mirror Darkly,"" when we discovered that the one of the Enterprise’s sister ships, the U.S.S. Defiant from the original series, had been sent to the Mirror Universe. Concept artist Doug Drexler created the artwork as if it were for the original Enterprise. He was inspired by the kind of graphics that were used on the original show and it shows several familiar locations including the bridge, sickbay, the briefing room and main engineering. The panels are designed to be hung on a wall or displayed on a shelf. They light up at the press of a button just like the displays on a starship. Even when they are off, the artwork is clearly visible, allowing you to study the ship’s systems in depth. The light panel is 31.5"" (80 cm) long and 10.25"" (26 cm) high. It works in a very similar way to the real displays used on the show with backlit film."