The F-302 fighter interceptor was Earth's first fighter designed to operate in space. It was developed using alien technology that was acquired through the use of the stargates, and was armed with railguns and guided missiles. It had a hyperdrive and could make interstellar journeys.

Length: 4 inches (10 cm); Width: 8 inches (20 cm)

One of the most iconic designs in the history of Stargate. The Goa'uld used Ha'tak motherships to impose their will on the Galaxy.

These vast ships resembled giant, spaceborne pyramids and were equipped with fearsome firepower. After the fall of the Goa'uld they were operated by the Free Jaffa.

This is one of a limited number of Stargate models produced by Eaglemoss.

The model is 8 inches (20 cm) wide.

When Battlestar Galactica returned in 2004, it was with a redesigned ship that cleverly echoed the original. Seen from the side, Eric Chu's design looks radically different, but when turned around, the familiar shapes of the classic version are evident in the design.

In the series, the Galactica is a relic of an earlier age, but its primitive technology allowed it to survive the Cylon attack to become humanity's flagship.

The model measures just over 10.5 inches (27 cm) long.

The Koto was an MCRN patrol destroyer that was illegally sold to Marco Inaros and became part of the Free Navy. It was one of several ships that attacked the Rocinante in the episode 'Hard Vacuum', when it was disabled by an attack from Drummer's ship.

The Koto was designed by Ryan Dening, who also designed many ships for Star Trek.

It was produced but never sold by Eaglemoss and we have acquired all the stock. Length approximately 9 inches (22 cm).

The Puddle Jumpers were Ancient ships that were used to fly through the Stargates to different locations in the Pegasus Galaxy. The Master Replicas model is based on the original VFX files that were used on Stargate Atlantis.

The model itself is just under 6 inches (15 cm) long.

**PRE ORDER**

In moments of stress or contemplation, Captain Picard asked the replicator to produce a hot cup of Earl Grey tea. The replicator, knowing exactly what he wanted, produced the tea in an elegant glass cup.

The Star Trek: The Next Generation art department wanted the cup to look both futuristic and timeless. It had to be at home in the 24th century, but it also had to be instantly recognizable. Rather than creating their own tea cup from scratch, they looked for the best examples of modern, twentieth century design.

They settled on a glass tea cup made by European homewares company, Bodum.

The instantly recognizable BISTRO cup became so closely associated with Star Trek, that fans informally refer to it as “The Picard Cup”. It went on to appear in Star Trek: Voyager: Star Trek: Picard.

Join an Enterprise landing party with this exceptional toy communicator with authentic lights and sound. This classic toy was originally designed by Diamond Select and was widely praised for its accuracy and functionality. Master Replicas are reissuing it with new sound effects, taken directly from the original Star Trek episodes.

The Star Trek communicator is a classic piece of design that inspired today's mobile phones. It was capable of sending signals across vast distances and was used to establish a transporter lock. This version was used by Captain Kirk and his crew during their first five-year mission.

The toy communicator is full-scale and was carefully modelled on the original prop, making it ideal for cosplay. It is activated by flipping it open. It has nine different sound clips taken from the original Star Trek, a moving moire pattern and working lights. It takes four AAA batteries (batteries not included).

This is a preorder that will ship in the spring of 2026

Bilskirnir is Thor’s ship, which made its debut in the Stargate SG-1 season 2 episode ‘Thor’s Chariot’, when it saved SG-1 from the Goa’uld. Bilskirnir was an incredibly powerful Asgard mothership with advanced transporter systems, engines that could cover intergalactic distances in hours, and an ion gun that could obliterate a Goa’uld Hat’tak ship.

In Norse mythology 'Bilskirnir' refers to Thor’s hall, where he lived with his wife Sif and their children.

The Master Replicas die-cast model is 15cm long and is based on the original VFX model, which was supplied to us by the production team.

Our aim as always is to bring you, the fan, the opportunity to purchase items that you won't be offered elsewhere.

As a member you will receive the following perks :

10% off all items until February 28th, 2026 (in addition to all other offers).

24 hours early access to all new releases including limited-edition and signed items*.

MEMBER-ONLY sale events

MEMBER-ONLY Access to a number of exclusive products launching before February 2026. These will be at our discretion and could include Star Trek, Doctor Who, Foundation, Stargate, The Orville, The Expanse, and new as yet unannounced licenses.

We are happy to announce that this year’s exclusives will include:

Two exclusive variant Star Trek action figures.

Two more Star Trek exclusives. These are from a line that has yet to be announced and are not action figures.

A variant of a classic Battlestar Galactica ship.

The white version of the Second Doctor’s TARDIS from ‘The Mind Robber’.

Further exclusive products to be announced during the year.

Club members continue to have access to the 2024 exclusives as long as they are in stock.

We’re taking another look at the online events. We hope everyone who came enjoyed them, but we also felt that they deserved a bigger audience.

*On rare occasions where early access isn’t practical, we guarantee to fulfil orders for club members as long as they are placed within the first 24 hours.

The original Viper is a maneuverable, one-man fighter that was one of the signature models of the original Battlestar Galactica. It was designed by legendary concept artist Ralph McQuarrie, who had recently finished work on Star Wars. The shooting models were beautifully made and rapidly became iconic.

The Eaglemoss model was one of the most popular the company produced. It measures 10.6 inches (27 cm) long.

The Starship Destiny was built by the Ancients and launched more than fifty million years ago. Its role: to seed stargates and investigate a mysterious message hidden in the fabric of the universe. What happened to the ship and her crew is a mystery. The arrival of an expedition from Earth, who activated the the ship’s stargate in 2009, provided the Destiny with a new crew — and a new mission.

The model is made of die-cast and measures 8.75 inches (22 cm) from front to back.

The Pegasus has been out of stock for ages, but it's coming back. New stock will be available in February 2026.

The Pegasus was Admiral Caine's Battlestar in one of the rebooted series' most acclaimed story arcs. It was more advanced and powerful than theGalactica, which it massively outgunned.

Most of the design work on the ship was done by CG modeller Jose Perez who set out to make a state of the art ship that was a contrast to the older Galactica. The model is just under 10.5" (26.5 cm) long.

This is a preorder that will ship from February 2026.

The Razorback started life as Julie Mao's racing ship. Avasarala and Bobbie use it to escape from the Guanshiyin before Bobbie ends up owning it. She uses it to investigate the missing Martian ships, which she discovers have been sold to the Free Navy.

The Eaglemoss model is 7.25 inches (18.5 cm) long.

The U.S.S. Cerritos is a California-class starship that is tasked with making second contact, offering engineering support and making supply runs. It's the star of Star Trek: Lower Decks, and is where Mariner and Boimler served their time as ensigns.

The model is part of Master Replicas new range of 4 to 5-inch long die-cast models, and is accompanied by a 48-page book, which slides into the base to make a display.

This model, from Battlestar Galactica: Blood & Chrome shows the Galactica in its prime during the First Cylon War, when it had more gun turrets and heavier armor plating.

The Eaglemoss model is just over 10.5 inches (27 cm) long.

Drink like a Starfleet officer with these exclusive mugs straight from the 25th century.

These brushed steel mugs would look right at home in Starfleet. Each one features the logo of a different division: Starfleet Academy in San Francisco, where generations of Starfleet officers have been trained; the Galaxy Class Starship Design Project, which was responsible for designing and building the U.S.S. Enterprise NCC-701-D; and Starfleet Headquarters itself.

The mugs were designed and created by Eaglemoss and are limited edition; exclusively available through MasterReplicas.com.

The mugs are 500ml / 17oz.

The XL USS Orville from Seth McFarlane's sci-fi series.

Eaglemoss only released a limited number of ships from the series, and this is the XL version of the hero ship.

The model is approximately 10.25 inches (26 cm) long.

The ships in The Expanse rely on an Epstein drive to reach the kinds of speed that make interplanetary travel practical. The drive was first tested on a second-hand yacht, and was discovered almost by accident.

This is one of the last models that Eaglemoss produced and we have them all.

Yacht length: 6 inches (16 cm); width: 4.7 inches (12 cm); height: 4.3 inches (11 cm).

In the original series the crew regularly drank coffee from grey cups. In one of the most famous incidents, Kirk discovers that tribbles have got into his dinner, eaten his chicken sandwich and drunk his coffee.

The cups were originally made of styrofoam, whereas ours are made of earthenware. We've also added a detail that you might have missed. When the cups first appeared in 'Where No Man Has Gone Before', they featured an Enterprise logo with a wreath, but it never appeared on them again. With a little help, we sourced that logo from Gene Roddenberry's files at UCLA and have included it on our cup. The tribble is removable, so your coffee should be safe.

To celebrate the 25th anniversary of The Matrix, Master Replicas are releasing an incredibly detailed die-cast model of Morpheus's ship The Nebuchadnezzar.

When The Matrix was released in 1999, the Wachowskis changed cinema forever. Sci-fi had never been cooler. The original movie played with huge ideas as Morpheus and his allies freed Neo from his mundane reality and introduced him to the truth: a world where the machines have subjugated humanity.

The Nebuchadnezzar, which was designed by concept artist Tani Kunitake, was at the heart of the story. The Neb was a rusting hovercraft that used EM pulses to protect itself from the machines, as Morpheus and his crew managed to stay one step ahead of the robotic Sentinels.

This impressive die-cast model has been digitally sculpted before being cast in zinc alloy and ABS, and painted by hand. It has been officially licensed by Warner Bros. and is a true collectors item.

The ship measures 11.8 inches (30 cm) long.